[Successful NVRAID unattended slipstream]

Right, the finishes setup without fault means it goes through the blue background dos based format, file copy and then reboots, then goes through the gfx based setup all the way through 39 mins to 0 etc etc, then reboots as normal. This is when it should start up for the first time, but all I get is the first 2 flashes of the blue bars on the boot screen, and the system then reboots and loops on that pattern.

It's a basic ISO I'm trying to create, I've not removed any components, added any apps, only added 1 hotfix, and not changed any options.

The entries in the txtsetup file are totlly standard, coppied directly from the guide, using the compressed method after using makecab.

Any other ideas? Thanks

Nick

Hello there!

I've followed this guide and it seems to work perfectly with the installation, but when the computer reboots and is going to launch windows for the first time I get a bluescreen and an instant reboot.

It seems I've got the exact same problem as you Nick?

My board is a MSI K8N Neo2 Platinum (with a non-functioning floppy-connector)

If I'm not able to solve this problem I'll have to return the board from where I got it, and that's just boring...

EDIT: I used drivers from this file: nForce_5.10_WinXP2K_WHQL_international.exe which I got from the nVidia-site.

And I put up a copy of my Winnt.sif file here: http://www.adelgren.se/alex/winnt.sif.txt

I'm very thankful for all the help I can get!

/Alex