Oswy
Content Type
Profiles
Forums
Events
Posts posted by Oswy
-
-
In previous attempts I alternated motor/head
HDD is exactly the ST3500320AS SD15 but...
F3 T>F712
Unable to load Diag Overlay
0 -
the dash flashes by about 30 minutes
----------
LED:000000CC FAddr:0024A051LED:000000CC FAddr:0024A051(disconnect.. cardboard etc.)F3T>F3 T>/2F3 2>ZSpin Down CompleteElapsed Time 0.144 msecsF3 2>USpin Up CompleteElapsed Time 6.546 secsF3 2>/TF3 T>m0,2,2,0,0,0,0,22 or F3 T>m0,2,2,,,,,22nothing happenalso triedF3 T>i4,1,22Unable to load Diag Overlay0 -
Well, you can try again from the beginning but skip the SMART erase command, and or simply try again, sometimes there are timing problems.
jaclaz
F3 2>/1 (enter)
F3 1>N1 (enter)F3 T>m0,2,2,0,0,0,0,22 (enter)
right?
0 -
Difficult to say, it could be the actual adapter DOA or more simply a cold solder (or improper connection of the wires you are using).
Yes, DoA
I bought another one and I have another problem
After
F3 1>N1 (enter)
appear
LED:00000047 FAddr:04290100
LED:00000047 FAddr:04290100
0 -
Hello, I have a doubt regarding the loopback with this:
http://imageshack.com/a/img703/6950/ixlh.jpg
when I connect RX with TX and I try to write something on HyperTerminal, nothing appears on the screen but the LEDs light up
any idea?
0
The Solution for Seagate 7200.11 HDDs
in Hard Drive and Removable Media
Posted
nothing
Today I asked for more information about the HDD (girlfriend's) and I knew that originally had the 0 LBA problem. Her brother updated the HDD with the latest firmware (as suggested by seagate software) and... BSY born!