tenz9596
Content Type
Profiles
Forums
Events
Posts posted by tenz9596
-
-
Have the latest anti-virus software support windows 98SE it?
0 -
Use CONFIG.SYS attached to this post.
I thought for a moment.
Initially only for Windows 98 SE to 2G of memory set, forget that there DOS 6.22 set
Also set config.dos .....
I restored the system, re-set, everything is normal, such as pictures .....
Adding HIMEMX.EXE to C:\DOS, and then renaming it to HIMEM.EXE
config.dos
DEVICE=C:\DOS\SETVER.EXE
DEVICE=C:\DOS\HIMEM.EXE /NUMHANDLES=64 /VERBOSE
rem DEVICE=HIMEM.SYS
rem DEVICE=C:\DOS\HIMEM.SYS
DOS=HIGH
FILES=30
rem DEVICEHIGH=\DRIVERS\QDMA.SYS
DEVICEHIGH=\DRIVERS\VIDE-CDD.SYS /D:IDE-CD
LASTDRIVE=Z
Thank you friends to help solve the problem
0 -
Use CONFIG.SYS attached to this post.
DOS 6.22 + Win98SE
config.dos...?
There is an unrecognized command in your config.sys file.
There is an error in your config.sys file on line?
0 -
zip, attach and post your config.sys
Config.sys
DEVICE=C:\WINDOWS/SETVER.EXE
DEVICE=C:\WINDOWS/HIMEM.EXE /NUMHANDLES=64 /VERBOSE
ram DEVICE=HIMEM.SYS
DEVICE=C:\WINDOWS\HIMEM.SYS
DOS=HIGH
ram DEVICEHIGH=\DRIVERS\QDMA.SYS
DEVICEHIGH=DRIVER\VIDE-CDD.SYS /D:IDE-CD
0 -
Can only be set to "MaxPhysPage = 48000" is MAXIMUM GOOD VALUE!
System displays 1152.0MB RAM
Can not display the full current RAM it?
No (不是 / 无).
Never (从不).
Impossible (不可能).
This is the syntax wrong, you do not really understand it? XD
Sorry， my English is poor response
So through an interpreter fast
Therefore, under normal window, Impossible display the full RAM capacity?
0 -
Another question, do not know is set to generate it?
ERROR: An Extended Memory Manager is already installed.
XMS Driver not installed.
How to solve ~ please?
You using Win98SE or WinME?
win98SE
0 -
YOU USE MY SETTINGS FROM OTHER THREAD! DENCORSO AND ALL SAY MAXIMUM STABLE IS ABOVE NUMBER! SET SAME IN "SYSTEM.INI" - BOTH PLACES!!! As I said in other thread Win98 has MAX RAM CAN USE AND CANNOT BE FIXED WE HAVE NO SOURCE CODE!
Because I set MaxPhysPage=40000 in system.cbNormal and Safe mode can over 1.5G, run into! Need several tests, the stability!But why in the system, only to see 1022.0MB RAM?
You can edit it to be MaxPhysPage=48000 and it'll see more RAM
(tired.....)
Can only be set to "MaxPhysPage = 48000" is MAXIMUM GOOD VALUE!
System displays 1152.0MB RAM
Can not display the full current RAM it?
0 -
But why in the system, only to see 1022.0MB RAM?
Win98SE will NEVER "see" more and CANNOT use ANY MORE THAN (CANNOT CHANGE THAT!)
Not true. I have a Patch that allows Windows 98SE to see up to 4GB of RAM and use all of it.
The workarounds in this thread ARE limited to 1.15GB of useable RAM.
Your Windows 95/98/SE/ME RAM Limitation Patch, is it a completely free version? Or watched other versions?
http://rloew1.no-ip.com/Programs/Patchm.htm
Current settings
Adjust MaxPhysPage = 40000 to 48000
From 1022.0MB to 1152.0MB
SYSTEM.INI
[386Enh]
MaxPhysPage = 48000
[vcache]
MaxFileCache = 524288
CONFIG.SYS
device = c: \ windows \ himem.exe / numhandles = 64 / verbose
REM device = himem.sys
SYSTEM.CB
[386Enh]
MaxPhysPage = 48000
[vcache]
MaxFileCache = 524288
Normal operation of the above settings
Another question, do not know is set to generate it?
ERROR: An Extended Memory Manager is already installed.
XMS Driver not installed.
How to solve ~ please?
0 -
I can not find the file you said that SYSTEM.CB, may I ask where?
Can't you read English?
SYSTEM.CB is another text mode configuration file that exists in C:\WINDOWS.Stop bumping threads you don't understand.
Extract and drop the attached file into C:\WINDOWS:
Problem should be resolved -
Stable operation of the test a few days now, 2G RAM
Normal and Safe mode can over 1.5G, run into! Need several tests, the stability!
But why in the system, only to see 1022.0MB RAM?
If widnows 98 SE part of all are considered normal, then the next stage ready to install windows XP, set the dual system!
Thanks submix8c friends finally provide detailed way!
dencorso also help solve the guide .... thank you
0 -
We SEEN #34~#35 - INCOMPLETE CHANGES!
Which? Do not know?Did you create SYSTEM.CB or not?Instructions at #35~#37. DO ALL OR WON'T WORK!!!! FORGET USE PATCH - USE HEX EDITOR INSTEAD! Inside IO.SYS REPLACE string "HIMEM.SYS" with "HIMEM.EXE" (NOT INSERT, BUT TYPE OVER TOP).
These are MY changes (WORKS! I have 1.5G)
Step#1
C:\WINDOWS\SYSTEM.INI
[386Enh]
MaxPhysPage=40000Step#2
Download and Install Xeno86 VCache.VxD
C:\WINDOWS\SYSTEM\VMM32\VCache.VxD <--here after install
Step#3
Click Link and find - "HimemX v3.32"
Download file and UNZIP with free 7-zip (FIRST ONE)
Copy HIMEMX.EXE to "C:\WINDOWS" folder and rename
C:\WINDOWS\HIMEM.EXE <--HIMEMX.EXE RENAME TO THIS
Step#4
Click Link and download Fix for Win98SE Language
Install Fix (FIX is IO.SYS file YOU NEED)
Step#5
Download xRayeR Fix to C:\
Reboot using "F8" Keyboard Key
Select "Safe Mode COMMAND PROMPT ONLY" <-- NOT JUST SAFE MODE
Enter command -
C:\W98IOPAT.EXE
-OR-
Use Hex Editor while Normal Boot to change INSTEAD. In English Fix (from Step#5) using a Hex Editor I find "HIMEM.SYS" at Hex Offset A4F4.
Here is Trial Hex Workshop. Find and Download "Hex Workshop v5.14" (last one that works with Windows 98SE).
Any Hex Editor that works on Win98SE is OK.
Step#6
CONFIG.SYS
REM - added the following for GT 1gib mem
device=c:\windows\himem.exe /max=1048576 /numhandles=64 /verbose
REM - removed the following for GT 1gib mem
REM device=himem.sysStep#7 (NEW STEP)
C:\WINDOWS\SYSTEM.CB
[386Enh]
MaxPhysPage=40000"MaxPhysPage=48000" is MAXIMUM GOOD VALUE! I use smaller.
DO THIS OR NOT WORKING!!!
Thank you!! Approach has been successful!!
My motherboard's memory slots, only three slots - currently installed 2G RAM!
Normal and Safe mode can over 1.5G, run into! Need several tests, the stability!
But why in the system, only to see 1022.0MB RAM?
Ask questions:
RAM 1G or more, high stability of the system do?
On Windows 98 SE or in the window into the system easy to use in unstable? Some message window!!
Close the folder or another program, move the file information, could this be? Appear Explorer message, the problem is unknown ....
If you follow those successful users, adjusting values, you can hug? To change System.cb .....
Day-to-day running Win 9x/ME with more than 1 GiB RAM
0 -
We SEEN #34~#35 - INCOMPLETE CHANGES!
Which? Do not know?Did you create SYSTEM.CB or not?Instructions at #35~#37. DO ALL OR WON'T WORK!!!! FORGET USE PATCH - USE HEX EDITOR INSTEAD! Inside IO.SYS REPLACE string "HIMEM.SYS" with "HIMEM.EXE" (NOT INSERT, BUT TYPE OVER TOP).
These are MY changes (WORKS! I have 1.5G)
Step#1
C:\WINDOWS\SYSTEM.INI
[386Enh]
MaxPhysPage=40000Step#2
Download and Install Xeno86 VCache.VxD
C:\WINDOWS\SYSTEM\VMM32\VCache.VxD <--here after install
Step#3
Click Link and find - "HimemX v3.32"
Download file and UNZIP with free 7-zip (FIRST ONE)
Copy HIMEMX.EXE to "C:\WINDOWS" folder and rename
C:\WINDOWS\HIMEM.EXE <--HIMEMX.EXE RENAME TO THIS
Step#4
Click Link and download Fix for Win98SE Language
Install Fix (FIX is IO.SYS file YOU NEED)
Step#5
Download xRayeR Fix to C:\
Reboot using "F8" Keyboard Key
Select "Safe Mode COMMAND PROMPT ONLY" <-- NOT JUST SAFE MODE
Enter command -
C:\W98IOPAT.EXE
-OR-
Use Hex Editor while Normal Boot to change INSTEAD. In English Fix (from Step#5) using a Hex Editor I find "HIMEM.SYS" at Hex Offset A4F4.
Here is Trial Hex Workshop. Find and Download "Hex Workshop v5.14" (last one that works with Windows 98SE).
Any Hex Editor that works on Win98SE is OK.
Step#6
CONFIG.SYS
REM - added the following for GT 1gib mem
device=c:\windows\himem.exe /max=1048576 /numhandles=64 /verbose
REM - removed the following for GT 1gib mem
REM device=himem.sysStep#7 (NEW STEP)
C:\WINDOWS\SYSTEM.CB
[386Enh]
MaxPhysPage=40000"MaxPhysPage=48000" is MAXIMUM GOOD VALUE! I use smaller.
DO THIS OR NOT WORKING!!!
Thank you, very detailed steps!
Because in the forums looking for a long time, not the result I want.
Work purposes, do dual system DOS6.22 / 98SE-FAT16 / XP-FAT32, need RAM 2G
Hope can go in Safe Mode ~
Pray your way to solve my problem ~
In addition Enter command -
C: \ W98IOPAT.EXE ...... Y
IO.SYS open [OK]
Searching for HIMEM.SYS string ... [not found]
The second sentence above, is how can the problem? Do you have met before?
0 -
Thanks for xrayer
I also multiboot Win98 and WinXP with 2GB RAM successful while use HimemX.exe Here's my win98's modify steps
1. Download HimemX from http://japheth.de/Jemm.html
2. Copy himemx.exe to win98 directory
3. Add the line in config.sys
DEVICE=C:\WIN98\HIMEMX.EXE
4. Here's my lines of system.ini:
[386Enh]
MaxPhysPage=48000
MinSPs=16
ConservativeSwapfileUsage=1
DMABufferSize=64
[vcache]
MaxFileCache=65535
ChunkSize=1024
After these step, I boot win98 with 2G RAM successful
In winXP, the sysem can detect 2GB RAM
And in win98, the system can detect 1150MB RAM
In addition to the boot, I discover that this what is the solution? Grub4dos
ERROR: an extended memory manager is already installed.
xms driver not installed.
0 -
SYSTEM.CB is another text mode configuration file that exists in C:\WINDOWS. Look up for it, I bet you have one. It is used, instead of SYSTEM.INI, when you boot to SAFE MODE, but otherewise it's not used. You have to fix it, or you'll be unable to go to SAFE MODE, if you ever need it. This is the Usher method of using more than 512 MiB of RAM. SYSTEM.CB may contain all the sections that may exist in SYSTEM.INI, althoug some of them will have different settings, and most don't exist. You'll probably need to create both [386Enh] and [vcache] sections in it, because usually the default SYSTEM.CB doesn't have them. Once you've done that, MaxPhysPage=40000 goes under [386Enh] and MaxFileCache=131072 goes under [vcache]. Your SYSTEM.INI, however, should already have at least [386Enh], so you may just have to create [vcache], in case there isn't such a section in it. You may put the new statements just below these headers, or below the last of the statements that may already exist in those sections. Provided they are in the correct sections, those statements should work OK.
I've been thinking and rainyd has a point in what he said. So I'm revising my original suggestion MaxFileCache=393216 (that means 384 MiB) to MaxFileCache=131072 (that means 128 MiB), as RLoew suggested elsewhere, because it should be enough. For the record, rainyd's suggestion of MaxFileCache=262144 (that means 256 MiB) should work OK, too, but 128 MiB uses even less RAM for the cache, leaving it available for general use.
Now, if I were you I'd set the new values in SYSTEM.INI and SYSTEM.CB, save and then reboot. The machine should reboot normally, despite these settings, with you present 512 MiB of RAM. Once you're back to windows check those files to ensure the new settings are really there, so as to rest assured all went well. Then shut the machin down, *disconnect the power source cable*, wait for about 1 min, then open the machine and add the new RAM sticks, making sure they are well seated. Then restart the machine, make sure the BIOS recognizes the memory and, if so, let it boot to windows. It should just work.
You may keep the CHUNKSIZE=1024 as it is in SYSTEM.INI, but there really is no need to add such a line to SYSTEM.CB, too.
I can not find the file you said that SYSTEM.CB, may I ask where?
Unusual memory issue - SOLVED - Rate Topic:
http://www.msfn.org/board/topic/142936-unusual-memory-issue-solved/page__st__20__gopid__985345
Currently I have followed these settings, or ineffective ....
Information set from the RAM 2G
Day-to-day running Win 9x/ME with more than 1 GiB RAM
0 -
Did you create SYSTEM.CB or not?
Which? Do not know?
0 -
As you can see, if you do Step#2, then you need not do Step#1 (or maybe even the SYSTEM.CB change).
There are no maybes.
Either SYSTEM.CB contains MaxPhysPage=48000 and MaxFileCache=131072, or it contains just MaxPhysPage=48000 and Xenó86's VCache is used. Patching IO.SYS by hand may be required, in case xRayeR's patcher isn't liking the IO.SYS given to it. Of course, loading HIMEM.EXE and HIMEM.SYS together will do no good.
Mainly been unable to enter safe mode
Under normal window in accordance with the above said steps, the results show 1150.MB system RAM
Setting screen is at # 33~34 and hardware / system specifications
In the end is how can the problem? Please help
0 -
Here is a good starting point.5) Running xRayeR's w98iopat.exe, in True DOS, from C:\
Enter Y, the second line shows the sentence, may I ask where the problem?
IO.SYS open [OK]
searching for himem.sys string... [not found]
Need to 2G, but it does not work in safe mode
Might I ask if you already have 2G installed? It may be easier to have only 512M to start with.
HOWEVER, that doesn't appear to be the problem (which I find unusual). Using a Hex Editor, at offset A4E4 I find it in the original Win98SE IO.SYS. Doubtful (even if language-dependent) that it can't be "found". I assume that you've successfully completed steps 1 thru 4?
Motherboard :GIGABYTE GA-7VA ver2.0
HDD : Seagate 40GB
Video card : Albatron GeForce FX5600 GT (128 MiB ; AGP)
Ram : Transcend DDR400 1G Transcend DDR400 512MB + ADATA DDR400 512MB = 1G Total= 2G
System: DOS 6.22 + Windows 98 SE
FAT16 2G
System.ini
Config.sys
Autoexec.bat
0 -
Here is a good starting point.5) Running xRayeR's w98iopat.exe, in True DOS, from C:\
Enter Y, the second line shows the sentence, may I ask where the problem?
IO.SYS open [OK]
searching for himem.sys string... [not found]
Need to 2G, but it does not work in safe mode
Might I ask if you already have 2G installed? It may be easier to have only 512M to start with.
HOWEVER, that doesn't appear to be the problem (which I find unusual). Using a Hex Editor, at offset A4E4 I find it in the original Win98SE IO.SYS. Doubtful (even if language-dependent) that it can't be "found". I assume that you've successfully completed steps 1 thru 4?
Yes - can be used under normal window, but not in safe mode
System displays 1150.0MB RAM
The article read, there are successful according to user settings, but in vain!
Safe mode is displayed
insufficient memory to initiaize windows
ouit one or more memory-resident programs or remove unnecessary utilities forme your CONFIG.SYS and AUTOEXTC.BAT files, and resatrt your computer
0 -
5) to access "Safe Mode" with > 1 GiB RAM you'll need both the VCache.VxD modded by Xeno86 and xRayeR's patch to IO.SYS.
Are you sure? Did you read my posts about system.cb in safe mode? They are here: http://www.msfn.org/board/more-than-win9x-safe-mode-t142953.html
If my solution works for safe mode, it can be more useful than binary patches.
@Usher: I've read it, rest assured. Your solution may well work. I have not tested it, nor can do it easily, because nowadays I use the RAM Limitation Patch, which I deem the best solution. It gives the system much more stability than any of the free solutions and access to all the RAM. Since I've got no experience with your method, I cannot recommend it, although this does not mean I'm implying it doesn't work. I simply never tried it, and, as far as I know, nobody else did, since you posted it. But I'm willing to add your thread and your machine to the > 1 GiB list, provided you PM me the description of your system, in the lines of the descriptions of the machines already listed there.
But using xRayeR's patch is very reliable, and has been thoroughly tested by many users.
Xeno86's modded VCache.VxD and xRayeR's modded IO.SYS are perfectly safe, there's no need to be paranoid about them, and they obviate a lot of work.
I recommend doing the following (read this as a Mini How-To), which works for both Normal and Safe Modes:
1) Adding a "MaxPhysPage=48000", without the inverted commas to the [386Enh] section of C:\WINDOWS\SYSTEM.INI
2) Installing Xeno86's modded VCache.VxD (after this, usually, no MaxFileCache line is needed in SYSTEM.INI)
3) Adding HIMEMX.EXE to C:\WINDOWS, and then renaming it to HIMEM.EXE
4) Applying MS KB311561, then rebooting.
5) Running xRayeR's w98iopat.exe, in True DOS, from C:\
6) Creating a CONFIG.SYS in C:\, containing the single line "DEVICE=C:\WINDOWS\HIMEM.EXE /NUMHANDLES=64", without the inverted commas.
For even better results, one should instead use RLoew's RAM Limitation Patch, of course, but that's not for free, and the above procedure is the most reliable way to do it completely for free, in my experience.
5) Running xRayeR's w98iopat.exe, in True DOS, from C:\
Enter Y, the second line shows the sentence, may I ask where the problem?
IO.SYS open [OK]
searching for himem.sys string... [not found]
Need to 2G, but it does not work in safe mode
0 -
Safe Mode will appear the following, how to solve?
insufficient memory to initiaize windows
ouit one or more memory-resident programs or remove unnecessary utilities forme your CONFIG.SYS and AUTOEXTC.BAT files, and resatrt your computer
0
I also multiboot Win98 and WinXP with 2GB RAM successful while use HimemX.exe 
v4 Windows Update
in Windows 9x/ME
Posted
Microsoft has the windows update for windows 98 to turn off?
Internet Explorer 6.0 SP1 repeated connection, can not connect to windows update.
So there is no solution to it? V4 ...
Search for a long time have not been found.