Silverscreen

so what cable should i get?

i'm looking to connect my monitor screen up to my tv but don't know how as i'm a beginner at this. i've got a Radeon 1800 xt and an crt TV with scart and RCA slots. anyone can help? i remember trying to do it a while ago with a vga to S-video cable (if i remember correctly) but it never worked, plus the cable wasn't long enough so it was hard to keep it in place. any help would be appreciated

i did uncheck it, but it just stayed on the laptop screen and the external monitor was blank. and yes, i do want to use the external monitor instead of the laptop one, what is image cloning? i'm not sure what gpu it has.

I'm trying to connect my dell monitor (dell ultra sharp 1704 fpv) to my laptop and using it as my default monitor. however, it doesnt seem to work. i have managed to extend my screen onto the monitor but unable to use the monitor just on its own. I'm using xp home edition atm. the software installed default is the Intel® 82852/82855 Graphics Controller Family. please help?

does anyone have any idea how to get the pc suite or driver for the Sony Ericsson K800i to working on XP 64? SE driver does not suppport XP 64

thanks guys, i will try it

I have tried using the RCA to S-Video to connect it to my tv, but my computer won't detect the TV. what should i do? i have a ATI Radeon x1800xt 512mb AMD x4200 dual-core 1mb ram sony SDM-HS95P 19" 2 x Raptors i have a goodmans TV, analogue. it has a scart connector and a 3 pin (red, white and yellow) and S-Video sockets.

is it possible to have 64bit xp and run hl2 in 32bit mode? i had this problem where i got near the end of the game and theres a part of the game where everytime i reach it, the program will shut down and exit. ive also got a amd 4200 x2 and ati 1800 xt

do you know where i can get this caddy?

is it possible to connect it as a usb storage device or does it have to be ide/sata?

does anyone know how to disconnect a laptop's HDD and connect it to a desktop? my laptop: Asus A1300B Specifications Processor Intel Pentium III 750MHz with SpeedStep at 100MHz bus clock Memory 128MB SDRAM expandable to 320MB Graphics SiS 630 video controller LCD Display 13.3-inch XGA TFT color display Display Modes 1024 x 768 at 32- and 16-bit color Media 24x Teac CD-ROM with floppy disk drive Storage 18.6GB I/O 2x USB, 1x serial, parallel, VGA-out, S-Video TV-out, RJ-45 Fast Ethernet, RJ-11 56K modem, audio (headphone, line-in, mic-in), IrDA, PS/2 PC Card Slot 2x Type-II Audio SiS 7018 audio controller Pointing Device and Keyboard Touchpad, CD Playback buttons Power Requirements Li-ion battery (2.5-3 hours)

my windows ME crashed yesterday while in the middle of doing something. it now freezes at the logo screen everytime i try to start it. i tried getting it to the safe mode, but it froze after i pressed F5 (button to go into safe mode) now it freezes at the startup menu, can anyone help me? my laptop details are below: Asus A1300B Specifications Processor Intel Pentium III 750MHz with SpeedStep at 100MHz bus clock Memory 128MB SDRAM expandable to 320MB Graphics SiS 630 video controller LCD Display 13.3-inch XGA TFT color display Display Modes 1024 x 768 at 32- and 16-bit color Media 24x Teac CD-ROM with floppy disk drive Storage 18.6GB I/O 2x USB, 1x serial, parallel, VGA-out, S-Video TV-out, RJ-45 Fast Ethernet, RJ-11 56K modem, audio (headphone, line-in, mic-in), IrDA, PS/2 PC Card Slot 2x Type-II Audio SiS 7018 audio controller Pointing Device and Keyboard Touchpad, CD Playback buttons Power Requirements Li-ion battery (2.5-3 hours)

i have a router made by Mentor: adsl-mr4c/uk 051900086 i have tried to make the port forwarding work. but yet i cannot get the nat to work. help?

i think its a bug and something i've not heard about from hl2. i went thru hl2 without any problems (except having to solve the ones presented to u) and have talked to many people who did the same. it the forcefield sud come down (dnt really remember the part ur on, but i do know that i didnt have to do nething significant to get thru ne forcefield). mite wanna write to valve bout this....

sorry mate but it looks like it aint gonna happen for you! to split a screen into 4 quarters is a very complicated process. (it happens that my neighbour was the main man in the group of scientists who invented the LCD and knows his stuff about monitors and light transition). i think that $2000 equipment is the closest u gonna get to doing what you want. to be honest, i'd just buy a very big tv......