[The Solution for Seagate 7200.11 HDDs]

Hello everyone, first of all apologize for my English as it is translated. I have two hard disks affected by the problem of one is a seagate firmware and the other maxtor.

The models are:

Maxtor DiamonMax22 STM3500320AS FIRMWARE MX15

Seagate Barracuda ST500320AS FIRMWARE SD15

I've been reading this forum and I built a cable from data cable CA-42 USB as I reached for another COM port adapter bought on Ebay that also is this DIGITAL CONVERTER KIT CMOS / TTL TO RS232, 3V, Low Power .

What you can see here http://cgi.ebay.es/ws/eBayISAPI.dll?ViewItem&item=200360298309&ru=http%3A%2F%2Fshop.ebay.es%3A80%2F%3F_from%3DR40%26fts%3D2%26_trksid%3Dp3686.m38.l1313%26_nkw%3D200360298309%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1

I use hyperterminal xp professional and properly configured.

Remove the pcb disk and connect the Tx and Rx.

Then I feed the sata connector on the PC.

The question is that with both wires get the same result in hyperterminal

marking the beginning and is Ctrl + F3 T z>

then frame 2 and the result is this

F3 T> 2

LED: 000000CC FAddr: 0025BF67

LED: 000000CC FAddr: 0025BF67

LED: 000000CC FAddr: 0025BF67

LED: 000000CC FAddr: 0025BF67

LED: 000000CC FAddr: 0025BF67

LED: 000000CC FAddr: 0025BF67

...

Cyclically So I find no way of marking the Z because it lets me get to that point.

I have read every post I could but it's the 2 weeks I am with this and now I can only ask you.

Does anyone of you have or have turned this problem?.

Thanks for your help.

Saludos

try to update the firmware

[The Solution for Seagate 7200.11 HDDs]

I am trying to do data recovery from Seagate 500 GB Hard Disk as per the procedure

mentioned in the forum.

I am having seagate ST3500S320AS model. The drive is being detected in bios but showing size as 0 bytes,

I followed all the procedure step by step as mentioned & all the steps were executed smoothly except the last command to regenerate the partition.

After giving the command m0,2,2,,,,,22 and waiting for few seconds I am getting the following error message :

DiagError 0000500E Process Defect List Error

R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, File Error 0000000

1

Please guide me why this error is coming. I tried the steps 2-3 times but no success.

Regards

Ravi

I have the same problèm didi you got a solution?

thank U

[The Solution for Seagate 7200.11 HDDs]

Just wanted to let readers know that I had the symptoms of the BSY problem on a Barracuda 7200.11 ST375033AS running FW SD35 (I say again SD35), MFR location China (WUXISG) ,Date Code 08311.

I searched this and other threads several times for anyone who did a procedure on a 750 with the SD35 FW and wasn't able to find out if anyone was successful. I was successful but with some strange indications. When I ran the BSY fix, I got a

"User Partition Format Successful - Elapsed Time 0 mins 00 secs" reply.

I was afraid I had moved on to a 0GB problem then, but I connected the drive and all the data was visible and I could (and did) copy it off to another drive.

My total expense was $3.05 ($3 for the torx screwdriver and $0.05 net for the cable and driver from a provider in LA. I have the same unit as mentioned above with the Red Blue and Orange wires. (red=TX, Blue=RX, Orange=GND).

I'm a little non-plussed about what to do next. According to the Seagate Website, my unit wasn't affected and theoretically doesn't require a firmware upgrade. I'll have to look into that a bit more.

I live in San Diego. If you're local and need some help, let me know.

Many thanks to all who helped post this solution.

Luky man....I cannot get it..the first part was perfectly ok but I cannot make the partition...in spite than all the connection are all right and I get perfectly the prompt.....but when I do F3 T>m0,2,2,0,0,0,0,22 I receive always the error, maybe if I change the circuit imprimed from a same DD...who knows !!! thank to listen me

[The Solution for Seagate 7200.11 HDDs]

I tried the 0 LBA fix (HDD is recognized by BIOS, but as 0MB), but it doesn't seem to work:

When I input "m0 2,2,0,0,0,0,22" it takes a few seconds until the first line ("Max Wr Retries"...) shows up completly but then appears the following error message:

Error 1008 DETSEC 0000500D

User Partition Format Failed - Elapsed Time 0 mins 00 secs

R/W Sense 00000002, R/W Error 00000084, File Error 00001002

Blk Addr 01080001, Blk Addr Type D0, Cyl 01590000, Hd 00

Anyone experienced the same or can help?

EDIT: Interface is a modified Sagem data-cable with SP232AET-chipset (equal to MAX232), but this interface seems to work as it gets an answer.

read this..

http://translate.google.com/translate?prev...sl=ru&tl=en

I get the same problème ...did you find a solution?

[The Solution for Seagate 7200.11 HDDs]

Hello, I tried and I tried but I still have this error......why ????

My DD is the seagate barracuda 500Gb firmeware SD15

is block to 0M capacity . There are a solution o is no possible any more?

F3 T>m0,2,2,0,0,0,0,22

DiagError 0000500E Process Defect List Error

R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, File Error 0000000

1