[Is explorer.exe related to pagefile.sys?]

Wow, it seems that I misunderstood. He might want to get rid of the ribbon completely.

Can I ask something a little off topic? Is there any relation between explorer.exe and pagefile.sys? I remember when I first installed W8, the pagefile was around 3 GB. A few days ago I happened to see it and found that it is only 524 MB! I don't know how to set it back to the default, I mean the recommended size before.

The page file is used when the OS runs out of RAM and starts writing to the hard drive for memory instead. By default, the page file is set to 1.5x the amount of RAM you have installed (might be wrong, I've been on Linux/Mac the last few years predominantly). So if you have 2Gb installed you get a 3Gb page file. However, you can easily change your preferences such that the page file size is dynamic- you set the upper and lower bounds and then Windows will grow it as it is needed (does anyone know if this is default now in Win 8?). This sounds like what you have happening. If it's 524Mb, you're still using the page file substantially, which isn't a problem (it's the design), it does not favor perormance. I would recommend upgrading your RAM if you have anything less than 4Gb, and even then, 16Gb isn't such an extreme goal these days

/endlecture

To answer your actual question, explorer.exe doesn't directly relate to the page file. But like any other running process, it executes within RAM and therefore needs memory allocated for it. If your Explorer is running Metro, aero glass, etc etc it will use more RAM than if it were running the classic interface (although a lot of windows management is handled by the DWM service). Enough to flood all of your RAM and force the OS to run half a gig of pagefile? Probably not, unless you have a seriously buggy extension on there or something. Hope this was helpful!

EDIT: Thanks to OP for the effort- when this becomes more developed it may the only reason I move past Windows 7 I'm one of the Metro haters...

[Performance Improvements?]

But here I sit using my Win7 PC all day and sometimes wish it handled some things like Win8 does, such as USB keys.

What's different about the way Win8 handles USB keys?

--JorgeA

Opens right away and doesn't keep prompting me to scan them. I use these USB keys multiple times a day and all that time wasted waiting for the dirs to open adds up.

I think it's an option in explorer if I'm not mistaken. AutoRun is annoying and a security risk.

[Performance Improvements?]

its quite irrelevant to me if my win will boot in 7 or 15 secs

its the time it takes me to turn on monitor and sit down on chair

I'd say speed goes to 7 coz 8 UI sucks too much for any normal use

That actually brings up a relevant point- raw speed is pointless if the user takes longer to operate the machine. A fast and efficient UI is just as important as a speedy platform.

[Performance Improvements?]

I completely agree, I was hoping to get some data primarily from benchmarking utilities. Reallistically, your average user will rate a computer's "speed" based on superficial qualities such as snappiness and bootup time. So in a way, Windows 8 "feels" faster, but only because it hasn't necessarily been thrashed and modified the same way the Windows 7 partition has been.

[Excessive RAM/CPU by LSASS.EXE]

lsass.exe is the Local Security Authentication Server process, which handles user logons and whatnot. I'm suspicious that your failed attempts at connecting computers over the LAN might be affecting this (you mentioned that logins were failing). Perhaps LSASS is trying to connect over the LAN repeatedly, or is simply tripping over itself due to your specific configuration? Just my brainstorming.

[Performance Improvements?]

A lot of us probably are curious how Windows 8 will stacks up to Windows 7 performance-wise. If you're dual-booting both systems and you have access to a benchmarking program like Geekbench, could you perhaps post some results?

If you don't, maybe share a bit about Windows 8 was faster (or slower) for a certain task (i.e. booting up, shutting down, etc). Of course, make sure that your conclusions are completely dependent on the OS difference (don't say that Windows 7 took longer to defrag for example, because that's 99% affected by your personal usage).

I probably don't need to say it, but obviously we won't be able to compare Windows 7 to the final product for a while- so this is just a rough analysis. If Win8 is faster now, there's a pretty good chance the final build will also be.

EDIT: I'll add in that I've been using the Public Preview very lightly, and so far have not been blown away by the performance. I'll benchmark when I get access to my old laptop where I have it installed later this week.

[7Slimmer MMX-R2]

Where I can find - SausageHacker presents for vLite?

Using - en_windows_7_home_basic_with_sp1_x86_dvd_u_676470.iso

Also looking for someone who can help to build Win7 Home image to be later installed as Xen VM. Happy to pay for it. I will try but understand I have no knowledge in Win customisations. May take a lot of time which I do not have. Happy to do myself under your guidance too.

We basically will use this image to install browsers - Chrome, Opera, IE9, Safari, FF to run Selenium tests. Need Windows update but should be disabled. All other services packages should be removed. If anyone interested - please pm me.

I used

as my version of Win 7 is from MSDN

and attached ini file for vLite. My ini is based on but I did not use bat file.

All is fine - can install on 4.9 partition with 900Mb free except I can not install a few updates KB2667402 and KB2621440 and can not update IE8 to IE9. Have update error 80073712 and can not understand what is a problem from Win update log file.

Even loaded IE install will not work.

Questions - did I remove too much, was it because MSDN, should I have used not only vLite but also bat files? Too many questions

Basically - stuck. Should I use MMX-R2 or try to dig into intricacies of vLite + bat spells?

Any word of advice is appreciated very much.

Thank you,

Igor

I still have the files from the 7Slimmer project if you really want them (will upload later, on my home computer). However, I would seriously recommend the 7Lite RT program. It is very useful and is far more user-friendly than 7Slimmer (and much more versatile).

Looking at the problems you mentioned, I'm guessing that a few key services/packages have been removed that have broken Windows Update. I remember not being able to upgrade to IE9 on a slimmed image I made last year- you'll have to more judicious about what you strip off. Best of luck, I'll be more helpful when I'm not at work haha.

[Limiting card to a specific network]

The situation is that I have a laptop that belongs to a younger member of the family, and it has internet access. The router we have has OpenDNS, which filters what she can access (i.e. she cannot access Facebook after 10PM, etc). The problem is that we have several unsecured networks in the area, and she can bypass all the filters by simply joining a different hotspot.

So is there any way to limit which networks can be joined? I have no problem paying for software, but I would prefer a simple registry tweak or something that a normal user wouldn't know how to circumvent. Thanks in advance!

[Use 2nd wireless card to share internet connection]

Is it possible to share my internet connection with a 2nd wireless card?

Here's my scenario......I have free wifi at my apartment. But the signal is a little weak. My laptop's internal network card can pick up the signal, but my iPad doesn't see the network because the signal is too weak. I know my iPad can connect to the network, because I can pick up the signal on it in the laundry room.

So if I have a 2nd wireless card, can I share the internet connection to my iPad? I can't find a solution anywhere, everything I find is how to share a wired connection with a wifi card, but not share a wifi connection.

Any ideas?

I did the exact same thing the other day successfully! My 4th-gen iPod touch wasn't getting our wifi, but I had an old WinXP box that was. I installed the 2nd card (Netgear WG311 v3) and its driver. Then, I went to Network settings (or whatever the interface is called in XP, where you can see all the connections) and right-clicked my first wireless card. I went to the last tab and checked the box to 'Share this connection' and after I applied, there was a little hand under the connection icon. So now any ad-hoc connections will be connected indirectly to the main wireless network.

The next part involves creating the new network. You can follow this link here, but if you know what you're doing, it's pretty simple. Just choose to create a network, and then configure it how you wish. Then go to the 2nd wireless card and choose to view available networks, and select the new ad-hoc network. On your iPad, find the network and join it. That's it!

Hint: While you're in the network settings, I recommend you rename your wireless cards. I named my original card something like 'Main Card' and the second one 'Champagne Supernova' because that's what my SSID is

[7Slimmer MMX-R2]

saw the earlier post, but cannot figure it out how to apply through GImage or Imagex.

For the time being, I might have to settle with full blown win7.

Thanks for your effort. Will keep an eye on Slimmer.

Best of Luck.

Try rebooting in between steps.

If you still get the WIM error, manually run the tweak.

As for applying the changes, run GImagex, and when you unmount, make sure it doesn't discard changes (commit).

[Super Cryptography! :D]

that is called Steganography

Actually, it's kind of neither cryptography (in the sense of encryption) nor stenography (again, subtle differences in meaning which are arguable). This merely hides a file (you could call that cryptography) by appending a file at the end of a jpeg file and nothing more. It's a pretty darn old and well known trick, very much like using NTFS' alternate data streams (which doesn't actually make the files seem WAY larger unlike this). Stenography rather hides the files in the pixels by slightly altering their color (you extract the infos by comparing to a reference picture).

Personally I just use truecrypt.

Yeah it doesn't alter the data in any way, so I really can't call it cryptography. I'm trying to think of a good algorithm for even better masking, like multi-merge. Any suggestions? Like recursively hiding a copy of the JPEG inside itself?

[Super Cryptography! :D]

Hello MSFN...it's been a while since I've posted. I'm in a different area altogether now, with a program I call RARinJPEG. What RiJ does is grab a RAR file and embed it inside a JPEG of your choice. Cool, but how is that useful?

Imagine you need a hide some files (it's a network drive, your boss, parents, etc) and you know that making it a hidden file won't be enough. Adding to a password protected archive is desirable, but once you create it, everyone can see it and they can question about it. For true cryptography, a file must be undetectable. That's where RiJ helps. Simply add your files to a password-protected RAR archive (it can be unprotected) and choose a JPEG image. RiJ combines them, and the finished project acts just like a normal JPEG, except that the size includes the RAR that's inside it (so if you're hiding porn, look elsewhere). When you run it, it makes a folder called MERGE. Put the RAR and the JPEG in here. When it finishes, you will have the new JPEG in that folder (it's easy to use, figure it out).

You can open the hidden files by opening the JPEG with WinRAR or 7Zip.

I am attaching a BETA version of this program. PLEASE leave feedback.

Thanks!

RARinJPEG Merger.exe

[7Slimmer MMX-R2]

In the removal.bat you have ATI listed for removal. How can I edit the removal.bat so that it does not give me an error while updating ATI drivers. It is not allowing me to download ATI drivers.

Any suggestions, how to remove the components listed in the removal.bat.

I am using Win7 64-bit, AMD processor, Gigabyte 870 Motherboard, ATI 4770.

Thanks in advance.

Download the Source zip file, and head to the rem64 file. You can find that line and delete it. To execute, run init.bat and it should work properly. B)

[7Slimmer MMX-R2]

Website is http://sausagehack.t35.com/en/programs.html

everytime i try to go download it, it goes to mediafire, then mediafire pops up and says "NOTICE: No servers are currently available with the requested data on them. Please retry your request in a moment.

Click to dismiss this message.

7Slimmer_MMX_R2.exe

(209 KB)"

Just go to post #1 (OP) on this thread and get it there. It works fine for me (?)

[Need help ; It shown "Device driver is missing]

Helllo everyone

I have a problem when i try to install windows7

(After select install language and click install)

Its shown "Device driver is missing.If you have a driver floppy disk,CD ,DVD or USB flash drive, please insert it now"

Could anyone told me what wrong with that?

This is my first time with vlite.

please, help me

First, make sure you do not remove anything with vLite that you aren't sure is safe to remove (look around on a few threads here).

Also, delete EVERY file out of /sources EXCEPT for install.wim, boot.wim and setup.exe

[Noob has Question]

I just started my first vlite attempt with Win 7.

When the systyem stars it is asking me what verion of Vin 7 I want to install.

I have the Ultimate version, but i think this means that all the other versions are also on this dvd.

Can I use vLite to enable the install options for those versions all one one disc?

If so , how?

A Windows installation disc can contain multiple install images inside one install.wim file. This doesn't affect the size by much, because the individual images are 99.9% the same (install.wim is compressed).

vLite gives you an option to rebuild to one image (which is recommended), or you can rebuild all. If you still want these options, choose to rebuild all.

Additionally, you can delete ei.cfg out of [iSO file}/sources/ if you want to have the ability to install any edition.

Check out my thread here for a noob-friendly guide: 7Slimmer MMX-R2

[7Slimmer MMX-R2]

EVERYONE WHO WANTS A CUSTOM WINDOWS 7 DVD!

I am uploading 7Slimmer MMX R2, a simple program I made to ease the process.

- Add drivers

- Remove bloat

- Integrate your language

- Cut out services and junk programs

- Smaller and faster install!

Download it from post #1!

Website is http://sausagehack.t35.com/en/programs.html

[7Slimmer MMX-R2]

EVERYONE WHO WANTS A CUSTOM WINDOWS 7 DVD!

I am uploading 7Slimmer MMX R2, a simple program I made to ease the process.

- Add drivers

- Remove bloat

- Integrate your language

- Cut out services and junk programs

- Smaller and faster install!

Download it from post #1!

[RT Seven Lite - RC build 1.7.0 and Beta build 2.6.0]

Hello, I tried this program out earlier this week after reading about it here.

Almost a year ago, I created the 7Slimmer program, because vLite was never more than 80% compatible with Windows 7. I am releasing a new version of it today.

I am VERY relieved to see that some other programmers have taken initiative in a vLite successor. My program is based on hard-coded scripts (hence a 200KB file size). The only way to really choose packages is to recompile it with edited scripts. I am quite happy to see some legit user-selection!

I never really got to successfully make a working image with beta 1.04, but I am confident that bugs will be worked out. As soon as the final stable version is released, I will lock 7Slimmer at whatever version I am on (currently 7Slimmer MMX R2).

Best of luck!

[7Slimmer MMX-R2]

Hi, I'm new here.

I've followed the guide but get this error:

Hope for a quick answer, I'm desperate to get this installed!

I'm curious as to what's the difference between using 7Slimmer and using vlite by itself. Ive managed to make a 2GB (I need Media Center) ISO by just using vLite, but I havent tested to see if it works.

Still working on some weird bugs like this. I noticed in your screenshot you have quite a few apps open. Try rebooting, and before you do anything else, run the removal code. This has solved some problems in the past. I am currently working on a new revision whenever I have a few extra minutes

[7Slimmer MMX-R2]

Hi,

I get the following error when I try to remove packages. It complains about Tweak.exe, but I dont see anywhere in the youtube vid or in the pdf where to put the wim_tweak file (which I presume it is looking for?). I tried manually copying it to the root C: but that didnt help

Thx.

That's a very weird error. The install_wim_tweak is actually included, but if you get this error, apply it manually using GImageX or imagex.

Doesn't work for me... I get the error:

CODE

[Window Title]

C:\Users\Genmutant\AppData\Local\Temp\3CFC.tmp\C32.exe

[Content]

C:\Users\Genmutant\AppData\Local\Temp\3CFC.tmp\C32.exe ist keine zulässige Win32-Anwendung.

[OK]

Which means C32.exe is no Win32-application.

I'm working with Vista 32bit and am trying to modify a 32Bit Windows 7.

genmutant, download the DOS supplemental disk from here. Now, extract the files into a folder and rename choice.com to C32.exe. Then, after you see the errotr, replace C32.exe with the new one.

This fixes some weird compatibility problems. Otherwise, use a Windows 7 install, it supports everything. (This might mean upgrading to W7 from Vista, then running 7Slimmer MMX, then installing the slimmed disk.

[7Slimmer MMX-R2]

thanks!!! don"t open the video

ummm why wouldn't you open the video?

[7Slimmer MMX-R2]

is there a step by step picture guide?

i tried with the guidev3 but do not understand really, sorry.

Hah I'm double-quoting

Here yah go http://www.youtube.com/watch?v=y42w01nUkhs

[7Slimmer MMX-R2]

Hy. In your tutorial you have mentioned about "Install wim tweak, see topic for download" where can i find that ????

well which tutorial was that? the 7slimmer program does this automatically

[7Slimmer MMX-R2]

is there a step by step picture guide?

i tried with the guidev3 but do not understand really, sorry.

The command line versions work fine, but are outdated in favor of the 7Slimmer. Grab it on page 1, post 1. No real guide is needed, just follow the readme and the included Word document.