Jump to content

jimineye

Member
 View Profile  See their activity

  • Posts

    6

  • Joined

  • Last visited

  • Donations

    0.00 USD 

  • Country

    United States

 Content Type 

Everything posted by jimineye

  1. jimineye
    ahh o.k I understand it now. Thanks a lot.
  2. jimineye
    Thanks a lot I'm just double checking, I'm not trying to be dense. Thanks for being patient with me. So the final version will look like this: [SourceDisksFiles] viasraid.sys = 1,,,,,,4_,4,1,,,1,4 viapdsk.sys = 1,,,,,,4_,4,1,,,1,4 [HardwareIdsDatabase] "PCI\VEN_1106&DEV_4149","viapdsk" "PCI\VEN_1106&DEV_4149","viapdsk" "PCI\VEN_1106&DEV_4149","viapdsk" "PCI\VEN_1106&DEV_3149","viasraid" "PCI\VEN_1106&DEV_3149","viasraid" "PCI\VEN_1106&DEV_3149","viasraid" [SCSI.Load] viasraid = viasraid.sys,4 viapdsk = viapdsk.sys,4 [SCSI] VIARAID_VT3149_XP = "VIA Serial ATA RAID Controller(Windows XP)" VIAPDSK_VT4149_XP = "VIA ATA/ATAPI Host Controller(Windows XP)" [Config.VT6420] value = "", Tag, REG_DWORD, 1 #HP-Delete following line #value = "Parameters\PnpInterface", 5, REG_DWORD, 1 23.09.2003 11:05 10,236 si3112.cat 16.09.2003 10:43 11,094 SI3112.inf 04.09.2003 12:45 55,144 Si3112.mpd 04.09.2003 12:45 55,144 Si3112.sys 30.04.2003 08:35 20,560 SiiSupp.vxd 31.07.2003 09:01 69,120 SilSupp.cpl 09.06.2003 17:56 10,112 SiWinAcc.sys 7 File(s) 231,410 bytes Thanks again.
  3. jimineye
    Will your Promise setup then work for what I'm tryign to do? Here is what I think the code should be for the VIA ones, not for sure though. "PCI\VEN_1106&DEV_4149","viapdsk" "PCI\VEN_1106&DEV_4149","viapdsk" "PCI\VEN_1106&DEV_4149","viapdsk" "PCI\VEN_1106&DEV_3149","viasraid" "PCI\VEN_1106&DEV_3149","viasraid" "PCI\VEN_1106&DEV_3149","viasraid" scsi = VIARAID_VT3149_XP ________________________________ OemPnPDriversPath="Drivers\006\VIARAID_VT3149_XP" _____________________________________ 23.09.2003 11:05 10,236 si3112.cat 16.09.2003 10:43 11,094 SI3112.inf 04.09.2003 12:45 55,144 Si3112.mpd 04.09.2003 12:45 55,144 Si3112.sys 30.04.2003 08:35 20,560 SiiSupp.vxd 31.07.2003 09:01 69,120 SilSupp.cpl 09.06.2003 17:56 10,112 SiWinAcc.sys 7 File(s) 231,410 bytes ___________________________________________________ Is this right?
  4. jimineye
    Thanks a lot. I'll do my best to figure it out.
  5. jimineye
    I have an ASUS K8V SE Deluxe, I'm not sure on the SATA controller, but is this it? IDE ULTRA ATA100?
  6. jimineye
    I found the link here on how to do it. http://greenmachine.msfnhosting.com/READING/addraid.htm But I have a Western Digital 200GB SATA hard drive, and I have no clue on what to substitute in there in replace of the: PCI\VEN_1095&DEV_3112&SUBSYS_31121095 = "Si3112" PCI\VEN_1095&DEV_3112&SUBSYS_34238086 = "Si3112" PCI\VEN_1095&DEV_3112&SUBSYS_311215D9 = "Si3112" PCI\VEN_1095&DEV_3112&SUBSYS_B0021458 = "Si3112" PCI\VEN_1095&DEV_3112&SUBSYS_01661028 = "Si3112" PCI\VEN_1095&DEV_3112&SUBSYS_82141033 = "Si3112" PCI\VEN_1095&DEV_3512&SUBSYS_35121095 = "Si3112" PCI\VEN_1095&DEV_3512&SUBSYS_01661028 = "Si3112" and si3112 = si3112 and si3112 = "Silicon Image SiI 3112 SATALink Controller" For part 3: OemPnPDriversPath="Drivers\006\SI3112" and Step 4: MAKECAB E:\XPCD\$OEM$\$1\DRIVERS\006\SI3112\SI3112.SYS E:\XPCD\i386\SI3112.SY_ Thanks in advance, I'm really frustrated with this right now. Help is much appreciated.
×
×
  • Create New...