brother
Content Type
Profiles
Forums
Events
Posts posted by brother
-
-
Hi
Gradius2, THANKS x 1000 !!!
I have a Maxtor DiamondMax 22 500 Gb SMT3500320AS wich had the BSY error. I have followed exactly your tutorial and all is ok now !!!
I didn't need to connect ground on the PCB.
I didn't need to do the G list optional.
I was blocked after the commande : F3 T>m0,2,2,,,,,22 (non response for 30 minutes).
So I power off the Sata, wait 10 seconds, power on, wait 30 seconds, ctrl Z, and F3 T>m0,2,2,,,,,22 again : after 2 minutes, the good answer on the terminal !!!!
I must say that on the Maxtor rx goes to rx and tx to the tx.
:thumbup :thumbup
Thanks a lot for all this work, you(re the best !
Nicolas
0 -
Hi
I have a Maxtor Diamondmax 22 STM3500320AS 500 Go wich seems to have the BSY error. I bought an RS232/TTL adapter that I wait for and also the other stuff. Since my english is not 100% sure, I don't want to miss something before I start to unblock the HDD. When Gradius2 says "connect the power supply to Hard drive circuit board", is it the sata power ?
Thanks
0
The Solution for Seagate 7200.11 HDDs
in Hard Drive and Removable Media
Posted
Hi
For guys who don't have the Gradius pics, here is a french board where someone did a french traduction of the all process, and put some pics. See in the middle of the page :
http://209.85.229.132/search?q=cache:-QxDa...lient=firefox-a