Jump to content
MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. ×

Tristano_74

Member
  • Posts

    9
  • Joined

  • Last visited

  • Donations

    $0.00 

Posts posted by Tristano_74

  1. when, finally, my HD will communicate with HyTerm I think I will follow the instruction above... but is all that sequence does with something between pcb and hda?

    BE SURE TO LEAVES BEFORE AND ALL ASSOCIATED SEE THE FIRST MESSAGE TO YOU .... YOU AND DECIDED AFTER SEE THAT PROBLEM HAS BSY O LBA0

    NOT PROCEED WITH THE CONTROLS.

    INSURED FOR WHAT HAS BEFORE

    Sorry for my english

  2. just search at home any usb to gsm phone cable. when you find one, connect it to usb port, if it detects as new hardware (and install after giving drivers) as USB-to-serial port with COMx where x is number, it will work. Did you find any cable?

    thanks, I don't have such cable at home, I have ordered ca-42 imitation from ebay, hope it works

    guys like me made the interface directly connected to the serial com port without any cable

  3. Hi

    I then review the situation did several tests the terminal does not receive any command :angel .

    the cable and I'm using a serial cable and com 2 does not exist

    There are doors com 1 and com 3 is shown with the com 1 and com 3

    When do the command ctrl z nothing happens I have tried both with the paper (Visit ticket) is not the terminal does not see anything.

    Going into property of the resources of the computer hardware settings I also tried to change the com port 1 and put on the out com 2

    terminal does not respond to the ctrl z :realmad: .

    help me plase!

    sorry for my english its very bad B)

    Tristano_74


×
×
  • Create New...