Mike87

Ok, I remade the disk in stages, firstly adding SP3, IE7, and WMP11. Tested on a VM and it worked. Then added all relevent hotfixes, and tested again on VM, worked fine. I'm leaving out the .net framework as I suspect that's what caused the error last time. At least it's working now, I'll just download the .net framework from windows update, it's still less hassle than downloading 40+ updates. Thanks for all the advice anyway, nLite is a brilliant tool

Unfortunatelly I can't attach my last session.ini as I wiped the machine I made the disk on to test. (Never actually thought to test it on a Virtual Machine first). The pasted list is not my last session.ini but rather the list of updates I downloaded and then used nLite to try and integrate. Full system specs are as follows: Motherboard Intel DX48BT2 Processor Intel Core 2 Quad Q9550 Video Card # 1 Sapphire Technology Radeon HD4870X2 2GB GDDR5 PCIE 2XDVI 700/900MHZ Memory Corsair Memory 4GB (2X2GB KIT) DDR3 1333MHZ 240PIN DIMM - TW3X4G1333C9DHX Hard Drive # 1 Western Digital VelociRaptor 300GB - in Raid 0 Hard Drive # 2 Western Digital VelociRaptor 300GB - in Raid 0 Hard Drive # 3 Seagate Barracuda 7200.1 500GB - in Raid 1 Hard Drive # 4 Seagate Barracuda 7200.1 500GB - in Raid 1 Optical Drive # 1 LG Electronics Blu-Ray/HD DVD-ROM COMBO 16x DVD Power Supply OCZ Technology EliteXStream 800W Case Lian-Li PC-A7110B Sound Card Intel® High Definition Audio 8-channel (7.1) Dolby Home Theater Monitor iiyama (can't remember the model number) Operating Systems Microsoft Windows XP Professional with Service Pack 3 (32 bit) Dual boot with Microsoft Windows Vista with Service Pack 1 (64 bit) Note the raid 0 Raptor drives are partitioned into two drives: 400GB C Drive, remaining 157 GB (I think, this is from memory) on D Drive. Seagate drives in raid 1 partitioned into one drive - Drive E I was attempting to install Windows XP Pro onto Drive D.

Ok, here is the background. I used nLite to integrate Service Pack 3, and all subsequent hotfixes (inc IE7 & WMP11) into my Windows XP Professional install CD, the idea being that I would have an up to date copy of Windows XP and wouldn't need to spend ages on Windows update after a system rebuild. Upon testing the cd, the initial files load fine, however when the system restarts to start the next portion of the setup, I recieve the following error message: At which point the system restarts. Any ideas as to what is wrong, or what I can do to fix it? The quote below shows the full list of hotfixes that I tried to integrate into the Windows XP installation CD. nLite was able to integrate most but errored on the .net frameworks. (Apologies for the large size)