I just looked in the Last Session.ini file. In there is says the following with the paths censored:
[Drivers]
****\SATARAID\iaahci.inf,iaStor_ICH8R
****\SATARAID\iaahci.inf,iaAHCI_ICH9R
****\IPMx2\All\5000XZVP.inf,0
I don't know if the first and last lines are correct. Is the ICH8R using the same driver as the ICH9R? I just selected to integrate the entire folder with the extracted SATA-drivers you gave me. Though I don't see any mention of iastor.inf. Do I need to integrate them separately?
For the last one, being the INF driver I copied the extracted drivers in the temp folder while the installer was running as there were no way of extracting them, just like the SATA ones. I just added that entire folder without removing the chipsets I didn't use. Is the last line saying it only integrated the 5000XZVP-driver or did it integrate all of them?
EDIT: Will applying the TCP-IP-patch mess with SFC?
Everything seems to be fine.
1. Don't warry about the "iaStor_ICH8R" within the [Drivers] section of the Last Session.ini file. The correct name is "iaStor_ICH8R/ICH9R", but the last digits were cut. Yes, the ICH8R and ICH9R Controllers are using the same drivers. nLite has copied all files (even the not needed ones) of the Intel SATARAID driver package I had uploaded for you.
2. The last line is ok too. nLite has copied the entire content of the Intel INF driver folder "All", that means all files, into your bootable XP CD. The 5000XZVP.inf file obviously was the one you pointed to.
3. If you want to integrate the TCP/IP patch, you should disable the SFC.
Is there a way to create the f6 driver files to install ICH9 on Windows 2000?
I am moving my Windows 2000 system disk to a new motherboard, the ECS G33T-M2.
According to the readme in the zipped files, http://downloads.datastarved.net/ahci_ich9.zip, Windows 2000 is not supported. When I try to install the drivers, I receive an error message "iastor is corrupted".
Is there a version of these drivers and install files that will work with Windows 2000 using the F6 option?
Integrate ICH9 SATA drivers on XP CD?
in nLite
Posted
Is there a way to create the f6 driver files to install ICH9 on Windows 2000?
I am moving my Windows 2000 system disk to a new motherboard, the ECS G33T-M2.
According to the readme in the zipped files, http://downloads.datastarved.net/ahci_ich9.zip, Windows 2000 is not supported. When I try to install the drivers, I receive an error message "iastor is corrupted".
Is there a version of these drivers and install files that will work with Windows 2000 using the F6 option?
Thanks,
Hojax