I have been trying and failing to get this scripted install to work with a new Precision t3400 that has a DELL SAS 6/it Integrated controller card with a SAS 15k drive on it. Every time I try and add the drivers to the install it comes back with the following error: The Entry "Dell SAS 6/ir Integrated" in The [sCSI] section of the INF file txtsetup.oem Setup cannot continue. I have tried many different ways to make this work. I hope it is something stupid and simple that I am missing but any help would be greatly appreciated! The current Configuration I have is the following Using BDD 2007 Used this link to try something different http://www.deployvista.com/Blog/tabid/70/E...18/Default.aspx I have tried with the following file locations of the drivers: %distributionshare%\Operating Systems\WXPSP2\I386\$OEM$\$1\Drivers\SAS6 %distributionshare%\Operating Systems\WXPSP2\I386\$OEM$\TEXTMODE Also tried %distributionshare%\Control\XP32WSAS\$OEM$\$1\DRIVERS\SAS6 %distributionshare%\Operating Systems\WP32WSAS\$OEM$\TEXTMODE Here is my unattendfile: I have changed the oempnpdriverpath file location to the corresponding location. I have also deleted the parts that are not needed. [Data] AutoPartition=1 MsDosInitiated="0" UnattendedInstall="Yes" [unattended] UnattendMode = FullUnattended OemSkipEula = Yes OemPreinstall = Yes OemPnPDriversPath = "Drivers\SAS6" TargetPath = \Windows DriverSigningPolicy = Ignore DUDisable = Yes DUStopOnError = No ; ExtendOemPartition = 1 ; If Set extends disk partition to end of disk or by x MB ; FileSystem = ConvertNTFS ; Specify wheter to leave filesystem alone or convert to NTFS ; AutoActivate = No ; Determines if Windows should auto activate over Internet ; ActivateProxy = Proxy ; Proxy Setting to use when auto activating windows CrashDumpSetting = 3 ; 3=small memory dump 0-3 DisableDynamicUpdates = Yes ; Don't go get updates from Internet during install Hibernation = Yes ; Yes=Enables hibernation, No=Disabled hibernation WaitForReboot = No ; Yes=Wait 15seconds after guimode setup to reboot ; ComputerType = ; Defines Custom HAL type ; Factory = Yes ; Used in conjuction with OPK If yes will not delete Sysprep directory ; ForceHalDetection = No ; Used in upgrades to keep previous hal ; Keyboardlayout = ; Allows specification of keyboard type ; NTUpgrade = No ; Indicates whether or not this is an OS upgrade ; OverwriteOEMFilesOnUpgrade = 0 ; Indicates whether OEM files should be overwritten ; Repartition = 1 ; Only when booting to CD specify 1 to repartition hard disk ; UnattendSwitch = No ; Set to yes during winnt installation to skip welcome ; Win9xUpgrade = No ; Indicats if this is an upgrade and to use [Win9xUpg] section [uninstall] ; This section has settings to allow an upgraded system to be uninstalled [GuiRunOnce] "cscript.exe %SystemDrive%\MININT\Scripts\LiteTouch.wsf /start" [LicenseFilePrintData] AutoMode=PerSeat ; Licensing Mode usually perseat ; AutoUsers=50 ; When in PerServer mode=number of licenses [RegionalSettings] ; IF this section is used the Winnt32.exe /copysource:lang setting must be specified ; InputLocale_DefaultUser= ; Specifies the Inputlocal and keyboard setting for default user ; UserLocale_DefaultUser= ; Locale ID for default User ; InputLocale ; Locale\Keyboard combinations to be installed ; Language= ; Lanugage locale to be installed ; LanguageGroup= ; Language Group to be installed ; SystemLocale= ; System Locale to be specified ; UserLocale= ; User Locale setting [GuiUnattended] ; Arguments= ; Used with Detached programs to provide arguments OEMSkipRegional=1 ; Indicates Regional info GUI to be skipped in setup ; EncryptedAdminPassword=No ; For OEMs allows use of hashpwd.exe cannot be used with autologon TimeZone="010" ; Sets Timezone 010=Mountain OemSkipWelcome=1 ; Used to skip welcome screens in GUI setup ; ProfilesDir="" ; Allows to change default location of profiles AutoLogon="Yes" ; Indicates that system should autologon after reboot AutoLogonCount=999 ; Number of times to auto logon ; DetachedProgram="" ; Specifies programs to run concurrently with Setup AdminPassword="<omitted> [identification] JoinWorkgroup=WORKGROUP ; CreateComputerAccountInDomain=Yes ; JoinDomain="CONTOSO" ; MachineObjectOU= "OU=Workstations, dc=contoso, dc=com" ; DomainAdmin="Contoso\Administrator" ; DomainAdminPassword="password" [userData] ComputerName=* FullName="<omitted>" OrgName="<omitted>" ProductKey="<omitted>" [Display] BitsPerPel=16 ; Number of colors in display Xresolution=1024 ; X resolution typically 1024 YResolution=768 ; Y resolution typically 768 Vrefresh=60 ; Vertical refresh rate [MassStorageDrivers] ; Used when custom disk drivers must be specified ; Enter the description name =Retail or OEM "LSI PCI Fusion-MPT Driver Install Disk" = OEM "LSI Adapter, 2Gb FC, models 44929, G2 with 929" = OEM "LSI Adapter, 2Gb FC, models 40919 with 919" = OEM "LSI Adapter, 2Gb FC, models 7202,7402 with 929X" = OEM "LSI Adapter, 2Gb FC, models 7102 with 919X" = OEM "LSI Adapter, Ultra320 SCSI 2000 series, w/1020/1030" = OEM "LSI Adapter, Ultra320 SCSI RAID series, w/1035" = OEM "LSI Adapter, SAS 3000 series, 4-port with 1064" = OEM "LSI Adapter, SAS 3000 series, 8-port with 1068" = OEM "LSI Adapter, SAS 3000 series, 8-port with 1068E" = OEM "LSI Adapter, SAS 3000 series, 4-port with 1064E" = OEM "LSI Adapter, 4Gb FC, models 7104,7204,7404 with 949X" = OEM "LSI Adapter, 4Gb FC, models 7104,7204,7404 with 949E" = OEM "LSI Adapter, SAS RAID-on-Chip, 8-port with 1078" = OEM "Dell SAS 5/E Adapter" = OEM "Dell SAS 5/i Adapter" = OEM "Dell SAS 5/i Integrated" = OEM "Dell SAS 5/iR Integrated D/C" = OEM "Dell SAS 5/iR Integrated Emb" = OEM "Dell SAS 5/iR Adapter" = OEM "Dell SAS 6/iR Adapter" = OEM "Dell SAS 6/iR Integrated" = OEM "Dell SAS 6/iR Integrated" = OEM "Dell SAS 6/iR Integrated" = OEM [OEMBootFiles] ; This section is used to specify custom HALs, and also maps to the Mass Storage Device section lsipseud.inf txtsetup.oem symmpi.sys symmpi.inf mpixp32.cat [OsChooser] ; Used by RIS Clients Only [ Here is the symmpi.ini file ; ; SYMMPI.INF - version XP.10 (Windows XP) ; ; This is the INF file for Windows XP for the SYMMPI based PCI MPI ; environment ; ; ******************************************************************** ; * ; Copyright 2007 LSI Corporation, Inc. All rights reserved. * ; * ; This file is property of LSI Corporation, Inc. and is licensed * ; for use as is. The receipt of or possession of this file does * ; convey any rights to modify its contents, in whole, or in part, * ; without the specific written consent of LSI Corporation. * ; * ; ******************************************************************** [version] signature="$Windows NT$" Class=SCSIAdapter ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318} Provider=%LSI% DriverVer=11/20/2007,1.26.05.00 CatalogFile.ntx86=mpixp32.cat [DestinationDirs] DefaultDestDir = 12 ; DIRID_DRIVERS [sourceDisksFiles.x86] symmpi.sys = 1 lsipseud.inf = 1 [sourceDisksNames] 1 = %DiskDesc%,, [Manufacturer] %LSI%=LSI %DELL%=DELL [LSI] %DevDesc2% = SYMMPI_Inst, PCI\VEN_1000&DEV_0622 %DevDesc3% = SYMMPI_Inst, PCI\VEN_1000&DEV_0624 %DevDesc4% = SYMMPI_Inst, PCI\VEN_1000&DEV_0626 %DevDesc5% = SYMMPI_Inst, PCI\VEN_1000&DEV_0628 %DevDesc6% = SYMMPI_Inst, PCI\VEN_1000&DEV_0030 %DevDesc7% = SYMMPI_Inst, PCI\VEN_1000&DEV_0032 %DevDesc8% = SYMMPI_Inst, PCI\VEN_1000&DEV_0050 %DevDesc9% = SYMMPI_Inst, PCI\VEN_1000&DEV_0054 %DevDesc10% = SYMMPI_Inst, PCI\VEN_1000&DEV_0058 %DevDesc11% = SYMMPI_Inst, PCI\VEN_1000&DEV_0056 %DevDesc12% = SYMMPI_Inst, PCI\VEN_1000&DEV_0640 %DevDesc13% = SYMMPI_Inst, PCI\VEN_1000&DEV_0646 %DevDesc14% = SYMMPI_Inst, PCI\VEN_1000&DEV_0062 [DELL] %DevDescD1% = SYMMPI_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F041028 %DevDescD2% = SYMMPI_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F051028 %DevDescD3% = SYMMPI_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F061028 %DevDescD4% = SYMMPI_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F071028 %DevDescD5% = SYMMPI_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F081028 %DevDescD6% = SYMMPI_Inst, PCI\VEN_1000&DEV_0054&SUBSYS_1F091028 %DevDescD7% = SYMMPI_Inst, PCI\VEN_1000&DEV_0058&SUBSYS_1F0E1028 %DevDescD8% = SYMMPI_Inst, PCI\VEN_1000&DEV_0058&SUBSYS_1F0F1028 %DevDescD9% = SYMMPI_Inst, PCI\VEN_1000&DEV_0058&SUBSYS_1F101028 %DevDescD10% = SYMMPI_Inst, PCI\VEN_1000&DEV_0058&SUBSYS_021D1028 [ControlFlags] ExcludeFromSelect = * [sYMMPI_Inst] CopyFiles = SYMMPI_CopyFiles AddReg = SYMMPI_AddReg CopyINF = lsipseud.inf [sYMMPI_Inst.HW] AddReg = Shutdown_addreg DelReg = LegacyScsiportValues [sYMMPI_Inst.Services] AddService = SYMMPI, %SPSVCINST_ASSOCSERVICE%, SYMMPI_Service_Inst, Miniport_EventLog_Inst [sYMMPI_Service_Inst] ServiceType = %SERVICE_KERNEL_DRIVER% StartType = %SERVICE_BOOT_START% ErrorControl = %SERVICE_ERROR_NORMAL% ServiceBinary = %12%\symmpi.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_pci_addreg AddReg = bus_type_scsi [sYMMPI_CopyFiles] symmpi.sys,,,1 [sYMMPI_AddReg] HKLM,SYSTEM\CurrentControlSet\Services\Symmpi\Parameters\Device,DriverParameter,0x00000002,"EnablePseudoDevice=1;" HKLM,SYSTEM\CurrentControlSet\Services\Symmpi\Parameters\Device,MaximumSGList,0x00010001,0xFF HKLM,SYSTEM\CurrentControlSet\Services\Symmpi\Parameters\Device,NumberOfRequests,0x00010001,0xFF [shutdown_addreg] HKR,"ScsiPort","NeedsSystemShutdownNotification",0x00010001,1 [LegacyScsiportValues] HKR,Scsiport,BusNumber HKR,Scsiport,LegacyInterfaceType HKR,Scsiport,SlotNumber [pnpsafe_pci_addreg] HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001 [bus_type_scsi] HKR, "Parameters", "BusType", 0x00010001, 0x00000001 [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll" HKR,,TypesSupported,%REG_DWORD%,7 [strings] LSI = "LSI Corporation" DELL = "Dell Inc." DiskDesc = "LSI PCI Fusion-MPT Driver Install Disk" DevDesc2 = "LSI Adapter, 2Gb FC, models 44929, G2 with 929" DevDesc3 = "LSI Adapter, 2Gb FC, models 40919 with 919" DevDesc4 = "LSI Adapter, 2Gb FC, models 7202,7402 with 929X" DevDesc5 = "LSI Adapter, 2Gb FC, models 7102 with 919X" DevDesc6 = "LSI Adapter, Ultra320 SCSI 2000 series, w/1020/1030" DevDesc7 = "LSI Adapter, Ultra320 SCSI RAID series, w/1035" DevDesc8 = "LSI Adapter, SAS 3000 series, 4-port with 1064" DevDesc9 = "LSI Adapter, SAS 3000 series, 8-port with 1068" DevDesc10 = "LSI Adapter, SAS 3000 series, 8-port with 1068E" DevDesc11 = "LSI Adapter, SAS 3000 series, 4-port with 1064E" DevDesc12 = "LSI Adapter, 4Gb FC, models 7104,7204,7404 with 949X" DevDesc13 = "LSI Adapter, 4Gb FC, models 7104,7204,7404 with 949E" DevDesc14 = "LSI Adapter, SAS RAID-on-Chip, 8-port with 1078" DevDescD1 = "Dell SAS 5/E Adapter" DevDescD2 = "Dell SAS 5/i Adapter" DevDescD3 = "Dell SAS 5/i Integrated" DevDescD4 = "Dell SAS 5/iR Integrated D/C" DevDescD5 = "Dell SAS 5/iR Integrated Emb" DevDescD6 = "Dell SAS 5/iR Adapter" DevDescD7 = "Dell SAS 6/iR Adapter" DevDescD8 = "Dell SAS 6/iR Integrated" DevDescD9 = "Dell SAS 6/iR Integrated" DevDescD10 = "Dell SAS 6/iR Integrated" ;******************************************* ;Handy macro substitutions (non-localizable) SPSVCINST_ASSOCSERVICE = 0x00000002 SERVICE_KERNEL_DRIVER = 1 SERVICE_BOOT_START = 0 SERVICE_ERROR_NORMAL = 1 REG_EXPAND_SZ = 0x00020000 REG_DWORD = 0x00010001 here is the txtsetup.oem # txtsetup.oem - version XP.9 - SYMMPI Windows XP x86 driver # # *********************************************************************** # * # Copyright 2007 LSI Corporation. All rights reserved. * # * # This file is property of LSI Corporation. and is licensed for * # use as is. The receipt of or posession of this file does not * # convey any rights to modify its contents, in whole, or in part, * # without the specific written consent of LSI Corporation. * # * # *********************************************************************** # # format for txtsetup.oem. # # General format: # # [section] # key = value1,value2,... # # # The hash ('#') introduces a comment. # Strings with embedded spaces, commas, or hashes should be double-quoted # [Disks] # This section lists all disks in the disk set. # # <description> is a descriptive name for a disk, used when # prompting for the disk # <tagfile> is a file whose presence allows setup to recognize # that the disk is inserted. # <directory> is where the files are located on the disk. # d1 = "LSI PCI Fusion-MPT Miniport Driver",\symmpi.tag,\ [Defaults] # This section lists the default selection for each 'required' # hardware component. If a line is not present for a component, # the default defaults to the first item in the [<component_name>] # section (see below). # # <component_name> is one of computer, display, keyboard, mouse, scsi # <id> is a unique <within the component> string to be associated # with an option. scsi = SYMMPI_32 [scsi] # This section lists the options available for a particular component. # # <id> is the unique string for the option # <description> is a text string, presented to the user in a menu # <key_name> gives the name of the key to be created for the component in # HKEY_LOCAL_MACHINE\ControlSet001\Services SYMMPI_32 = "LSI PCI Fusion-MPT Driver (XP 32-bit)",symmpi [HardwareIds.scsi.SYMMPI_32] id = "PCI\VEN_1000&DEV_0622", "symmpi" id = "PCI\VEN_1000&DEV_0624", "symmpi" id = "PCI\VEN_1000&DEV_0626", "symmpi" id = "PCI\VEN_1000&DEV_0628", "symmpi" id = "PCI\VEN_1000&DEV_0030", "symmpi" id = "PCI\VEN_1000&DEV_0032", "symmpi" id = "PCI\VEN_1000&DEV_0050", "symmpi" id = "PCI\VEN_1000&DEV_0054", "symmpi" id = "PCI\VEN_1000&DEV_0058", "symmpi" id = "PCI\VEN_1000&DEV_005E", "symmpi" id = "PCI\VEN_1000&DEV_0056", "symmpi" id = "PCI\VEN_1000&DEV_005A", "symmpi" id = "PCI\VEN_1000&DEV_0640", "symmpi" id = "PCI\VEN_1000&DEV_0646", "symmpi" id = "PCI\VEN_1000&DEV_0062", "symmpi" # This section lists the files that should be copied if the user # selects a particular component option. # # <file_type> is one of driver, port, class, dll, hal, inf, or detect. # See below. # <source_disk> identifies where the file is to be copied from, and must # match en entry in the [Disks] section. # <filename> is the name of the file. This will be appended to the # directory specified for the disk in the [Disks] section to form the # full path of the file on the disk. [Files.scsi.SYMMPI_32] driver = d1,symmpi.sys,SYMMPI inf = d1,symmpi.inf inf = d1,lsipseud.inf catalog = d1,mpixp32.cat [Config.SYMMPI] # This section specifies values to be set in the registry for # particular component options. Required values in the services\xxx # key are created automatically -- use this section to specify additional # keys to be created in services\xxx and values in services\xxx and # services\xxx\yyy. # # <key_name> is relative to the services node for this device. # If it is empty, then it refers to the services node. # If specified, the key is created first. # <value_name> specifies the value to be set within the key # <value_type> is a string like REG_DWORD. See below. # <value> specifies the actual value; its format depends on <value_type> value = Parameters\PnpInterface,5,REG_DWORD,1
