stuartjk

Hi. Are we talking about the nvagp.INF file to identify the card? I can confirm the card ID is present and the correct model is identified when updating the drivers, the problem occurs when this update is complete. I also have to update the drivers by using the "Specify the location of the driver (Advanced)" option, rather than using the install package. If there is a way to update the actual installed driver to change power settings etc, is there any guidance on what to change? Ta

As mentioned previously, I have limited the the VCache and ram access to (512 and 128 at present respectively) a combination of values from 64m to 768. In all instances there are no memory errors until I install the 82.69 drivers which is then reporting the card and correct size of the memory on the card. The issue here is not system RAM it is gfx ram(512mb on the card). From 82.69 the thread it appears that the 82.69 drivers have not been as fully tested as previously led to believe shall therefore abandon this until further information is available. Thanks for your help.

Hi there. I am having problems getting my 7600gs to work using modded drivers and I feel it may have something to do with the RAM on the card. It has 512mb of installed on the GFX card and 2 gig of system ram. I am limiting the system ram to 128 mb, as 98 rarely uses more than this. Everything is running hunky dorey until I use modded drivers to install my 7600gs. Yes I know that the Nv 7 series is not supported by 98, but I've heard a lot of people reaching success with the 82.26 modded drivers (available in the UBCD, but I have also tested the stand alone download), however after installing these drivers, I receive system instability and "Not enough memory" errors aplenty. Reverting the graphics card back to Standard Video Adapter stops these errors and returns stability. When using the modded drivers I cannot install all the features as when running the install it states there is no compatible hardware detected, even with the switches given in 82.26's workround, I therefore have to use the inf to undate drivers in hardware Manager. I am wondering if the amount of RAM on the card is maxing out the system ram (shadowing) or if there is some other darker force at work (Drivers working are afluke). I have testing this with combinations of limiting RAM to 128, 256, 512 and 768 with limiting the page file for 50mb, 128mb and 512mb and the AGP Apeture bios settings set to 32, 64, 128 and 256mb. I have installed RivaTuner which, using the modded drivers, recognises the 7600 but is limited in it's capabilities (no overclocking). Using the RT power user settings, I have forced the GFX Device ID to replicate a 6600gt to try and force driver installs. But no success. I have access to a 6600gt with 128 mb of ram but have been unable to get hold of it yet to test the drivers. My mobo is a MSI 6702 (Neo2-FIR) and all other components work without a hitch. I did notice that there is no AGP gart driver installed in system devices, but there is a "CPU to I/O" device (would imaging this could be the same). My main questions is, does anyone know of any way the GFX RAM recognised by 98 can be reduced (similar to the maxphyspage setting)? There is nothing I could My second question: Is there anyone out there been able to get a 7 series with 512mb GFX ram working with 98, if so how? Yeh I know there's a lot but it's just to show I've run out of ideas. If you have any suggestions, I am your puppet to do with as you please (short of breaking hardware, software I do't mind so much). Ta yall.

Man that's gonna burn my head for days, turned off all filter seetings for my browser, including firewalls, nothing works with ie7. Dont understand. got a linux VM running on my remote box. out of all 6 of my machines, (4 virtual 2 physical), only my virtual linux box will download it. Anyway cheers. Might have to think about ei7 in future.

Thanks for the reply I have tried both left click (first as per the instructions) and then (right click) save target as, neither works. I have you DM running on my system, I do have another machine running remotely, and it does not work for this one either. Dont like using 3rd party when the standard should work. I am using IE7, could this affect it? Cheers

Using my original XPPro disk, I slipstreamed SP2 using the old autostreamer, then using nlite, added the remaining 60+ updates that have been released since. however, when i finish the update, I get toinstall another 53 + 8 optional updates (all of which has been integrated using nlite.). Also, when I try to integrates .net 2 and .net 1.1 it errors at integration, and .net3 errors at os install.. Kinda not seeing any point of trying at the moment. Any ideas? Cheers

Nuff said above. Keep getting the 403.url error whenever I press (left or right take you pick) on any downloads currently hosted on the nlite website, this includes addons. Any Ideas? Ta