loulou

I was already down to minimal components and with no overclocking. However, I had changed some bios settings relating to my sata drive. So I followed your suggestion and reset the bios to defaults and gave it another try. This time, XP breezed through the Installing Devices section and completed the installation without incident! I feel a bit foolish - not thinking of this myself. What a great thing it is -- having access to people with more experience and a fresh perspective. You saved me a lot of time and trouble.

Hello all, I am trying to install XP Pro on a new motherboard (Asus P5B-VM) w/Intel P4 3.4 CPU. I used RyanVM's Integrator and nLite to create an install CD that includes SP2, some critical updates, and the Asus drivers. Everything seems fine until the 35-minute mark, when the install process is Installing Devices. It gets about halfway through and then the monitor goes dark and everything shuts down except the power and the CPU fan. I've left it in this state for as long as an hour, and it doesn't restart. If I manually reboot, the installation restarts but then shuts off again at the same point. Same behavior occurs when I try installing with the original XP install CD. Interestingly, with Windows 2000, the installation process hangs at the same point, but the monitor stays on, and after 5-10 minutes of runnint some sequence over and over, the process resumes and the installation completes successfully. BTW, the same CDs will install XP Pro and Win2k on my old motherboard and on VirtualPC without this behavior. I checked the logs, and setuperr.log is empty. The last log written to is setupapi.log. Here are the last 20+ lines: #I123 Doing full install of "ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_1". #I121 Device install of "ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_1" finished successfully. [2007/04/07 12:57:46 300.1044 Driver Install] #-019 Searching for hardware ID(s): acpi\genuineintel_-_x86_family_15_model_4,*genuineintel_-_x86_family_15_model_4,acpi\genuineintel_-_x86_family_15,*genuineintel_-_x86_family_15,acpi\genuineintel_-_x86,*genuineintel_-_x86 #-018 Searching for compatible ID(s): acpi\processor #-199 Executing "E:\WINDOWS\system32\setup.exe" with command line: setup -newsetup #I022 Found "ACPI\Processor" in E:\WINDOWS\inf\cpu.inf; Device: "Processor"; Driver: "Processor"; Provider: "Microsoft"; Mfg: "(Standard processor types)"; Section name: "Processor_Inst". #I023 Actual install section: [Processor_Inst.NT]. Rank: 0x00002000. Effective driver date: 04/01/2004. #I022 Found "ACPI\GenuineIntel_-_x86" in E:\WINDOWS\inf\cpu.inf; Device: "Intel Processor"; Driver: "Intel Processor"; Provider: "Microsoft"; Mfg: "Intel"; Section name: "IntelPPM_Inst". #I023 Actual install section: [intelPPM_Inst.NT]. Rank: 0x00000004. Effective driver date: 04/01/2004. #-166 Device install function: DIF_SELECTBESTCOMPATDRV. #I063 Selected driver installs from section [intelPPM_Inst] in "e:\windows\inf\cpu.inf". #I320 Class GUID of device remains: {50127DC3-0F36-415E-A6CC-4CB3BE910B65}. #I060 Set selected driver. #I058 Selected best compatible driver. #-124 Doing copy-only install of "ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_0". #-166 Device install function: DIF_REGISTER_COINSTALLERS. #I056 Coinstallers registered. #-166 Device install function: DIF_INSTALLINTERFACES. #-011 Installing section [intelPPM_Inst.NT.Interfaces] from "e:\windows\inf\cpu.inf". #I054 Interfaces installed. #-166 Device install function: DIF_INSTALLDEVICE. #I123 Doing full install of "ACPI\GENUINEINTEL_-_X86_FAMILY_15_MODEL_4\_0". Here's the end of setup.log (w/the guid x'd out): 04/07/2007 12:57:46.343,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,5941,,SETUP: SetupDiCallClassInstaller(DIF_INSTALLDEVICE) suceeded. Device = Intel Processor 04/07/2007 12:57:46.343,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,3325,,SETUP: Device successfully installed. 04/07/2007 12:57:46.343,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,3423,END_SECTION, 04/07/2007 12:57:46.359,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,2908,,SETUP: Index = 17, DeviceId = ACPI\GenuineIntel_-_x86_Family_15_Model_4\_0 04/07/2007 12:57:46.359,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,2929,BEGIN_SECTION, 04/07/2007 12:57:46.359,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,2986,,SETUP: Device was NOT installed via answer file driver 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,3124,,SETUP: DriverType = 2 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,3125,,SETUP: Description = Intel Processor 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,3126,,SETUP: MfgName = Intel 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,3127,,SETUP: ProviderName = Microsoft 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,3128,,SETUP: GUID = {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,3138,,SETUP: DeviceClass = Processors 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,1434,,SETUP: Device not yet installed. 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,5668,,SETUP: SetupDiCallClassInstaller(DIF_ALLOW_INSTALL) succeeded. Device = Intel Processor 04/07/2007 12:57:46.640,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,5723,,SETUP: SetupDiCallClassInstaller(DIF_INSTALLDEVICEFILES) succeeded. Device = Intel Processor 04/07/2007 12:57:46.875,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,5898,,SETUP: SetupDiCallClassInstaller(DIF_REGISTER_COINSTALLERS) succeeded. Device = Intel Processor 04/07/2007 12:57:46.937,d:\xpsprtm\base\ntsetup\syssetup\syspnp.c,5910,,SETUP: SetupDiCallClassInstaller(DIF_INSTALLINTERFACES) succeeded. Device = Intel Processor At this point, I don't know whether this can be solved by modifying the installation or whether the hardware is bad. I'm out of ideas and would much appreciate any thoughts you have. Thanks!!