Jump to content

Resurr

Member
  • Posts

    32
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Australia

Everything posted by Resurr

  1. i am doing the following command and i get an error saying "Setup cannot continue because the version of Windows on your computer is newer than the version on the CD. " Setup cannot continue because the version of Windows on your computer is newer than the version on the CD. is there a way to stop it from checking the version or is there somwhere i can download it from ? thanks
  2. i cannot reboot lol after first boot it will not go back into windows no matter what i do even if i dont install the dirvers
  3. the gainward geforce 7900GTX golden sample 512mb is a pcie video card and the harddrive is sata i dont think there is a problem with the drive as it installs windows fine and runs on first boot fine same with the graphics card however do i need to install something that might be stoping my 2x 7900gtx in sli mode from allowing windows to boot
  4. it just stops with a black screen just beofore the boot logo comes up if i goto F8 then press boot with last known good configuration it stops at a black screen before the logo comes up if i goto start normally it stops on that screen the timer counting down stops at that number and it just sits there if i goto safe mode it gets to mup.dll or something and stops by stops i mean that the h/d stops making sounds the cpu fan stops becouse it only starts when the chip is under load which makes me think that it just isnt doing anything i am shure it is a windows problem or a setting on the mainboard i just cant figure out what i have read the manuals but cannot see what i have dune wrong
  5. I am having a problem with my new computer specs are as follows DFI nforce4 expert venus motherboard amd 4400+x2 64bit chip 2gb PQI turbo ddr duel channel ram 74gb western digital raptor sata gainward geforce 7900GTX golden sample 512mb the problem i am having is i install windows and it installs fine on first boot it starts fine and also runs fine however after i reboot after the first boot it does not start windows it halts before the windows xp boot logo i have tried installing all the drivers before i reboot i have tried installing half of them and i have tried non of them and i am always getting the same problem can someone please tell me what i can do to rectify this problem thanks in advance
  6. ok sorry to bug you if i am i am new to linux i mean i have used it i even think it is better then windows however i found it hard to learn i was told to start of on GENTOO which i completed everything and the command base of it was working fine however i never got my monitor it work with it on my laptop and as i needed the main pc for xp so i could at least look at the instructions or if there was a problem i couldnt install it on it becouse i am new to it i am just wondering what you think the best version to start off on is ? once again any help wouold be great thnx
  7. Ahh k thnx what is ssh ? and how would i controle it would it show up as a console like a dos prompt ?
  8. Hey just wondering if anyone knows how i would go about controling a linux based machine from windows xp pro. I plan on buying a cpu second hand and wanted to have it for like a gaming server / file server for when i have lans and for my house. I do not wish to have a monitor or keyboard or mouse ect just the basic cpu connected to my computer via a network connection. Does this sound possible and if so can anyone please give me any info that they can? Also is there a way to bypass the keyboard cheak in the bios? I have never tryed that before so i dont know if it can be dune and as i am at work ai cannot cheak right now in my bios. Any help would be great. Thank you. Title Edited - Please follow new posting rules from now on. --Zxian
  9. ok everyting is fine until i press 3 to make it install windows 2003 server it starts the txt setup and starts to load raid ect like it normally does then i get a msg PLEASE INSERT THE DISC LABELED Windows Server 2003, Standard Edition CD-ROM Into Drive A:\ * Press Enter When Ready
  10. is it possible to run a dos command that will make a box come up that looks like the error msg boxes not an error but i want it to say something like Hi and welcome to Windows
  11. i have a beta copy of dos 7.0 did it go final ?
  12. i have dune it so the root looks like BOOT Microsoft Windows For Workgroups Disk #1 Microsoft Windows For Workgroups Disk #2 Microsoft Windows For Workgroups Disk #3 Microsoft Windows For Workgroups Disk #4 Microsoft Windows For Workgroups Disk #5 Microsoft Windows For Workgroups Disk #6 Microsoft Windows For Workgroups Disk #7 Microsoft Windows For Workgroups Disk #8 Microsoft Windows For Workgroups Disk #9 Microsoft Windows For Workgroups Disk #10 boot98se.IMA now the cd rome is e:\ and i can goto disk 1 and setup however it asks me to insert disk labeled Microsoft Windows For Workgroups Disk #2 into drive e:\ and then it waits there and i cannot tell it where to find the files if anyone can help thnx alot btw i found out hwy XP and 2003 were not installing it was coz of a couple of name problems i had XPPROSP1 as a name and it would only let me use 4 letters
  13. hrm i edited the .dat files they way the site told me to as far as i can tell i edited them the write way still dont know why it is not installing i mean i have replaced all the .dat files again using the guide and still no luck this time i did it very slowly and cheaked everything and no go
  14. overright i opened them in there folders after i sorted them all out and then jsut opened the files edit them and save them
  15. -b\XPCD\loader.bin <- that is for discemu menu -b\XPCD\BOOT\loader.bin <- that was for cdshell but both menus seem to work i dont think the problem is there
  16. the .dat files are in the root of the CD one other thing is the windows 98 boot disk works on both menus i duno if that helps but it shows that the menus do work i duno what it is stuffing up opn me if the batchfile i used to run cdimage.exe looks like the following will that effect it ? coz it removes all attributes
  17. the menu is working fine i mean i even tried a ver with diskemu both goto where u tell it 1 - goes to windows sp1 then press 1 again to install regular and it sez the error on both menus i cheaked the .dat files they are correct in the cdshell.ini and in the discemu batch and then i opened the dat files in hex editor and cheaked them they looked fine all linked up right then txtsetup.sif and hexed setupldr.bin and they seemed fine i duno what the probelm is i mean i did alot of modding on windows XP in order to fit it and 2003 server onto 1 700mb cd but i didnt really touch 2003 and that doesnt workj eather givees me the same error
  18. hrm as i siad on my last msg in the things i have tried and all of them wher the only fixes i found on this site i have tried goodgle but got back sites in chineese i think and the links to the forums on this site i have already been on
  19. i ahve replaced the .dat files with ones i mad from the orifinal cds i have burned it with both nero and fireburner and no luck it keeps giving me CDBOOT: Cannot boot from CD - Code:5 no matter what i try i have cheaked all the hex links to the boot folders for windows xp and server exct they are all right i have deleted the 3 files from the boot folders i am running the menu form \BOOT\ on the root of the cd newest ver of cdshell too
  20. lol there not there now thnx to whoever removed them was very tired when i posted that XPCD- --BOOT --SSVR2K3A (Regular Setup Boot files folder for server 2003 standard) --SSVR2K3B (Unattended Setup Boot files folder for server 2003 standard) --VOL1A (Regular Setup Boot files folder for XP pro sp1 oem standard) --VOL1B (Unattended Setup Boot files folder for XP pro sp1 oem standard) --VOL2A (Regular Setup Boot files folder for XP pro sp1standard) --VOL2B (Unattended Setup Boot files folder for XP pro sp1 standard) --XPPro ---i386 ---$OEM$ --XPProCorp ---i386 ---$OEM$ --SServer ---i386 ---$OEM$ --BOOT1.DAT -(OEM XP pro sp1 boot file for regular) --BOOT2.DAT -(OEM XP pro sp1 boot file for unattened) --BOOT2A.DAT -(normal XP pro sp1 boot file for regular) --BOOT2B.DAT -(normal XP pro sp1 boot file for unattended) --BOOTSSA.DAT -(normal 2003 server boot file for regular) --BOOTSSB.DAT -(normal 2003 server boot file for unattended) --README.HTM --SPNOTES.HTM --WIN51 --WIN511C --WIN511C.SP1 --WIN511P --WIN511P.SP1 if you have any questions please ask also do you have to tell cdimage.exe to make them all capitals ? coz it keeps making them capitals for every file and every folder
  21. didnt work any ideas ??
  22. **** it i tihnk i know whats wrong BOOTSSb.dat is the boot files in the files in hex it is a small b or a ect and in the cdshell.ini and the cdimage.exe made it all capitals with my programs so i am ganna no through and change then all and try that
  23. ok rdy and going with my multi-cd howerver my cdshell.ini menu works to a point the image comes up then the menu and then i go through to the os and non of them work windows 2003 reg and unattended and windows XP sp1a and XP sp1a corp reg and unattended vers for them and i dont know why it sez cannot boot from cd code 5 when i try to run the setup using the boot1.dat system
  24. thnx sorta did that well i messed with the cab n e way lol umm i ahve dune the windows XP cab but now i wanna do the 2003 cab too is it possible ? i used the guide on here to reduce it to 185mb i didnt actually do that much but was wondering if the batch files to remove them all works on 2003 server
  25. ok i have used goshs reduce size guide and dune it however i am about 50mb over now only 50 i was wondering if it is possible to reduce the size of windows XP pros driver.cab and also server 2003 driver.cab there are 2 XP vers and 1 server ver on there so i figure if i can take even 20 mb out of each then i might be in luck anyone know if it is possible to reduce the size ? even if it means removing the os wont have drivers for other pplz stuff the setup on each os is linked to a CD 2 with all my drivers on it thnx for any help
×
×
  • Create New...