Jump to content

Tostis

Member
  • Posts

    9
  • Joined

  • Last visited

  • Donations

    $0.00 
  • Country

    Italy

Posts posted by Tostis

  1. i followed this guide http://ngine.de/article/id/8/

    1) install Windows 7 into VMWare Workstation

    2) make an image of the partition with program like Paragon Partition Manager

    3) with Paragon cd (found in Paragon Program files) restore that image on external usb hd

    4) start pc with external usb hd but it will not work

    5) start pc with Windows 7 dvd and try all recovery possibilities to add a line in bcd and fix mbr

    6) start pc with external usb hd but it will crash with BSOD

    7) start pc with Ultimate Boot CD for Windows then launch Regedit(remote), select Windows 7 root folder

    8) modify windows registry setting Group = System Reserved and Start = 0. Registry should be like this

    HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","DisplayName",0x00000000,"USB Mass Storage Driver"

    HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","ErrorControl",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","Group",0x00000000,"System Reserved"

    HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","ImagePath",0x00020000,"system32\DRIVERS\USBSTOR.SYS"

    HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","Start",0x00010001,0

    HKLM,"SYSTEM\CurrentControlSet\Services\USBSTOR","Type",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","DisplayName",0x00000000,"USB 2.0 Enhanced Host Controller

    Miniport Driver"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","ErrorControl",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","Group",0x00000000,"System Reserved"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","ImagePath",0x00020000,"system32\DRIVERS\usbehci.sys"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","Start",0x00010001,0

    HKLM,"SYSTEM\CurrentControlSet\Services\usbehci","Type",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","DisplayName",0x00000000,"USB2 Enabled Hub"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","ErrorControl",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","Group",0x00000000,"System Reserved"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","ImagePath",0x00020000,"system32\DRIVERS\usbhub.sys"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","Start",0x00010001,0

    HKLM,"SYSTEM\CurrentControlSet\Services\usbhub","Type",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","DisplayName",0x00000000,"Microsoft USB Universal Host

    Controller Miniport Driver"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","ErrorControl",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","Group",0x00000000,"System Reserved"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","ImagePath",0x00020000,"system32\DRIVERS\usbuhci.sys"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","Start",0x00010001,0

    HKLM,"SYSTEM\CurrentControlSet\Services\usbuhci","Type",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","DisplayName",0x00000000,"Microsoft USB Open Host Controller

    Miniport Driver"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","ErrorControl",0x00010001,1

    HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","Group",0x00000000,"System Reserved"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","ImagePath",0x00020000,"system32\DRIVERS\usbohci.sys"

    HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","Start",0x00010001,0

    HKLM,"SYSTEM\CurrentControlSet\Services\usbohci","Type",0x00010001,1

    9) restart pc and it will work

    9bis) If you restart because of hardware changes, it will not work so you have to repeat steps 7-8-9. Maybe you

    should (i have not tested it) redo steps 7-8 before restart

    Note: you can use similar programs like Partition Magic, VirtualBox, any WinPE ecc

    EDIT: i have just found PWBoot Project

    This post has been promoted to an article

    • Upvote 1
  2. need help with v4.11 since all its menus are written in *.cfg files while this tutorial has *.scn files...

    i tried using script to load *.cfg files but it doesn't work and the flyakite ubcd tutorial has some flaws...

    plz help...

    ubcd 4.11 now uses isolinux instead of cdshell. you should call "isolinux" from cdshell.ini. i just tryed but the ubcd menu cannot be browsed



×
×
  • Create New...