Jump to content

HP NC4400 Sysprep masstoragedrivers BSOD


Recommended Posts

i have a NC4400 with SATA in native mode and i am deploying a syspreped image to it on first boot it BSOD loops as per the Storage Drivers scenario as if i disable native mode the image works fine.

My sysprep.inf

[unattended]

oemskipeula=Yes

InstallFilesPath=c:\sysprep\i386

UpdateInstalledDrivers=Yes

DriverSigningPolicy=Ignore

KeeppageFile=

ExtendOEmPartition=1

.....

[sysprepmassstorage]

PCI\VEN_8086&DEV_27C5&CC0106=C:\D\M\IN\1\O\IAAHCI.INF

PCI\VEN_8086&DEV_27DF=C:\D\C\I\XP\ICH7IDE.INF

The above two storage drivers were confirmed from device manager:

NC4400 (NATIVE ENABLED)

Intel® 82801G (ICH7 Family) Ultra ATA Storage Controllers – 27DF

PCI\VEN_8086&DEV_27DF

Intel® 82801GBM SATA AHCI Controller

PCI\VEN_8086&DEV_27C5&CC_0106

Primary IDE Channel

PRIMARY_IDE_CHANNEL

Am i missing some other options in the unattended section?

i have not used the Oempnpdriverspath as i have used devpath to populate the reg key with all the relevent paths.

Thanks

Nigel

Link to comment
Share on other sites


i have a NC4400 with SATA in native mode and i am deploying a syspreped image to it on first boot it BSOD loops as per the Storage Drivers scenario as if i disable native mode the image works fine.

My sysprep.inf

[unattended]

oemskipeula=Yes

InstallFilesPath=c:\sysprep\i386

UpdateInstalledDrivers=Yes

DriverSigningPolicy=Ignore

KeeppageFile=

ExtendOEmPartition=1

.....

[sysprepmassstorage]

PCI\VEN_8086&DEV_27C5&CC0106=C:\D\M\IN\1\O\IAAHCI.INF

PCI\VEN_8086&DEV_27DF=C:\D\C\I\XP\ICH7IDE.INF

The above two storage drivers were confirmed from device manager:

NC4400 (NATIVE ENABLED)

Intel® 82801G (ICH7 Family) Ultra ATA Storage Controllers – 27DF

PCI\VEN_8086&DEV_27DF

Intel® 82801GBM SATA AHCI Controller

PCI\VEN_8086&DEV_27C5&CC_0106

Primary IDE Channel

PRIMARY_IDE_CHANNEL

Am i missing some other options in the unattended section?

i have not used the Oempnpdriverspath as i have used devpath to populate the reg key with all the relevent paths.

Thanks

Nigel

Nigel,

If you look in the Sata driver readme from HP there are instructions on how to make the Mass Storage work for the ICH7 family in unattends or sysprep systems.

I actually do multisystem unattends on DVDs for HP under different contracts and have been scripting the SATA drivers for quite some time.

Randy

Link to comment
Share on other sites

Thank, i have now followed the following guide SATA Sysprep Guide

extracted the floppy image to a directory c:\sata

updated the [unattended] section

added the [sysprepmasstoragedrivers] as suggested.

re syspreped with -pnp -mini

booted up and still bsod with native enabled when diasabled in F10 image flys through and ends up with IDE emulation mode :(

i can then reinstall the IC7 chipset drivers followed by manually changing the driver for the SATA to the IC7 driver then reboot and system all fine.

just sysprep not playing for some unknown reason.

Thanks

Nigel

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...