ballsup Posted May 24, 2007 Share Posted May 24, 2007 i have a NC4400 with SATA in native mode and i am deploying a syspreped image to it on first boot it BSOD loops as per the Storage Drivers scenario as if i disable native mode the image works fine. My sysprep.inf[unattended]oemskipeula=YesInstallFilesPath=c:\sysprep\i386UpdateInstalledDrivers=YesDriverSigningPolicy=IgnoreKeeppageFile=ExtendOEmPartition=1.....[sysprepmassstorage]PCI\VEN_8086&DEV_27C5&CC0106=C:\D\M\IN\1\O\IAAHCI.INFPCI\VEN_8086&DEV_27DF=C:\D\C\I\XP\ICH7IDE.INFThe above two storage drivers were confirmed from device manager:NC4400 (NATIVE ENABLED) Intel® 82801G (ICH7 Family) Ultra ATA Storage Controllers – 27DF PCI\VEN_8086&DEV_27DF Intel® 82801GBM SATA AHCI Controller PCI\VEN_8086&DEV_27C5&CC_0106 Primary IDE Channel PRIMARY_IDE_CHANNELAm i missing some other options in the unattended section?i have not used the Oempnpdriverspath as i have used devpath to populate the reg key with all the relevent paths.ThanksNigel Link to comment Share on other sites More sharing options...
randalldale Posted May 24, 2007 Share Posted May 24, 2007 i have a NC4400 with SATA in native mode and i am deploying a syspreped image to it on first boot it BSOD loops as per the Storage Drivers scenario as if i disable native mode the image works fine. My sysprep.inf[unattended]oemskipeula=YesInstallFilesPath=c:\sysprep\i386UpdateInstalledDrivers=YesDriverSigningPolicy=IgnoreKeeppageFile=ExtendOEmPartition=1.....[sysprepmassstorage]PCI\VEN_8086&DEV_27C5&CC0106=C:\D\M\IN\1\O\IAAHCI.INFPCI\VEN_8086&DEV_27DF=C:\D\C\I\XP\ICH7IDE.INFThe above two storage drivers were confirmed from device manager:NC4400 (NATIVE ENABLED) Intel® 82801G (ICH7 Family) Ultra ATA Storage Controllers – 27DF PCI\VEN_8086&DEV_27DF Intel® 82801GBM SATA AHCI Controller PCI\VEN_8086&DEV_27C5&CC_0106 Primary IDE Channel PRIMARY_IDE_CHANNELAm i missing some other options in the unattended section?i have not used the Oempnpdriverspath as i have used devpath to populate the reg key with all the relevent paths.ThanksNigelNigel,If you look in the Sata driver readme from HP there are instructions on how to make the Mass Storage work for the ICH7 family in unattends or sysprep systems.I actually do multisystem unattends on DVDs for HP under different contracts and have been scripting the SATA drivers for quite some time.Randy Link to comment Share on other sites More sharing options...
ballsup Posted May 24, 2007 Author Share Posted May 24, 2007 Thank, i have now followed the following guide SATA Sysprep Guideextracted the floppy image to a directory c:\sata updated the [unattended] sectionadded the [sysprepmasstoragedrivers] as suggested.re syspreped with -pnp -mini booted up and still bsod with native enabled when diasabled in F10 image flys through and ends up with IDE emulation mode i can then reinstall the IC7 chipset drivers followed by manually changing the driver for the SATA to the IC7 driver then reboot and system all fine.just sysprep not playing for some unknown reason.ThanksNigel Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now