Jump to content

WinPe from USB HDD


Bumbastik

Recommended Posts

Hi All,

I have a "little" problem with WinPe from usb HDD (without load RAM ), when boot I see the classic Vista progress bar but after a blue screen with this error

0x0000007B ( 0x80E03ABA0, 0xC0000034, 0x00000000, 0x00000000)

have you any idea for this issue ?

I have tried on three different pcs and USB HDD is only hdd present on the pcs

Thanks for your help

Bumbastik

Link to comment
Share on other sites


Mats ,

thank for your answer , but I have tried with four new main boards and all with last bios version .

This procedure works fine only with internal hdd ( S- Ata ) .

Have you any , suggestion , workaround or fix about my issue ?

thank ( again ) for your help

Ciao

AnyB.

Link to comment
Share on other sites

Last thing I have heard is that WinPE 2.0 resets the USB bus somewhere in the boot process and thus breaks the access to the USB boot hdd itself. If you use the RAM-disk method you won't have that problem, but you will need more RAM in the PC to be booted.

Link to comment
Share on other sites

bj-Kaiser ,

your answere is correct .

My problem is present only when I try boot from external usb w/o load ram

if my pWinpe boot from external usb with load ram all works fine

if my Winpe boot from internal Hdd ( S-ata ) w/o load ram works fine

bye

Bumbastik

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...