pretender69 Posted June 13, 2007 Share Posted June 13, 2007 setres worked ok for me, at 1280 1024 32 1 but when i used 1024 768 32 1 is sets it again when you hit refresh, didn't notice this behaviour when i used 1280 1024 32 1 bored at work here can't wait for new version hehe Link to comment Share on other sites More sharing options...
geezery Posted June 13, 2007 Author Share Posted June 13, 2007 (edited) Ok,here is the new version, with all the files inside. I have tested it also, so it should work now. Just change the MyFilePath to your distribution path.http://koti.mbnet.fi/geezery/ImageXGuiv32.zipIt only works in WinPe v2. You should have a proper path in MyFilePath, because it prompts the browse function if it can't find *.wim files in the path and the browse.exe currently works only in winpe, because of the static X:\Windows\system32 path.Post your experiences here, so I can have some feedback. Edited June 14, 2007 by geezery Link to comment Share on other sites More sharing options...
geezery Posted June 13, 2007 Author Share Posted June 13, 2007 (edited) I reupped the zip with two fixes. Thanks goes to thebearboo!-Added a line in Browse function to fix the temp browse.txt file issue thebearboo finded-Added one space hit to setres function, no extra space needed in front of the SetResFunction setting-Added check to browse function, if selection is empty it won't change the current dir.-Fixed the HTA window size from fullscreen -> maximize Edited June 13, 2007 by geezery Link to comment Share on other sites More sharing options...
pretender69 Posted June 13, 2007 Share Posted June 13, 2007 (edited) only problem i've had so far is with setres not setting what's in the hta.although that was with the previous zip you had up. will try again with this newer zip you posted. hehumm setres settings in hta aren't getting applied, works when i type through cmd prompt but not from hta. weird was working before Edited June 13, 2007 by pretender69 Link to comment Share on other sites More sharing options...
thebearpoo Posted June 13, 2007 Share Posted June 13, 2007 I haven't much luck using the setres in the hta either. I just execute it in my startnet.cmd before the hta loads and it works fine. Link to comment Share on other sites More sharing options...
solutionone Posted June 14, 2007 Share Posted June 14, 2007 (edited) just tested the new version geezery, it works great, except there is two \\ in the capture new image prompt.also any chance of displaying the current labels of the disk and the available/free disk space in the logical disk information? Edited June 14, 2007 by solutionone Link to comment Share on other sites More sharing options...
ccb458 Posted June 14, 2007 Share Posted June 14, 2007 (edited) I guess the setres doesn't work is because of the var RunOnce is not set to 1 when it goes to the loop :------------------------------If RunOnce = 1 ThenCall SetRes()RunOnce = 0End If------------------------------either set Runonce to a value of 1 by: Const RunOnce = 1 or take out the If loop will do it.. Edited June 14, 2007 by ccb458 Link to comment Share on other sites More sharing options...
geezery Posted June 14, 2007 Author Share Posted June 14, 2007 (edited) ccb458 was right, because I forgot to put this line Runonce = 1Now it should work. reupped the zip. Setres.exe has to be in Windows\system32 folder or else the script just skips the setres function.Solutionone: I can add that information also. I can't find the extra "\" on my code, since it works properly in me. Can you describe the exact input label or something, so I can track the bug.I'll added the freespace and volume name also to Disk Information. Edited June 14, 2007 by geezery Link to comment Share on other sites More sharing options...
solutionone Posted June 14, 2007 Share Posted June 14, 2007 while you're adding the disk info, I'm not sure if it is even possible but could you also display the disk id, this would be very handy for identifying multiple physical disks, compared to partitions on the same disk. Link to comment Share on other sites More sharing options...
geezery Posted June 14, 2007 Author Share Posted June 14, 2007 What do you mean by ID? Link to comment Share on other sites More sharing options...
pretender69 Posted June 14, 2007 Share Posted June 14, 2007 not sure if you meant to post v32but the link points to v31. Link to comment Share on other sites More sharing options...
bjorne78 Posted June 14, 2007 Share Posted June 14, 2007 Where do I find the download link? Link to comment Share on other sites More sharing options...
geezery Posted June 14, 2007 Author Share Posted June 14, 2007 I'm 100% sure I changed the link. It's now edited. Link to comment Share on other sites More sharing options...
solutionone Posted June 15, 2007 Share Posted June 15, 2007 the disk id i'm talking about is the id of the physical disk,e.g. run diskpart list disk, it gives you the id of each disk, the first disk is always 0, second disk is always 1.if you have a partition on a single hard drive, the first and second partition will still be id 0, as it is on the same physical disk Link to comment Share on other sites More sharing options...
BlueSol Posted June 22, 2007 Share Posted June 22, 2007 All I keep getting is Access Denied when I try to run the script. Before hand I was getting a script error which I believe was due to a space in the Globals Setup section:Set objWMIService = GetObject ("winmgmts:\\.\root\cimv2") - Changed to - Set objWMIService = GetObject("winmgmts:\\.\root\cimv2")I will fart around some more and post my results. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now