Dahi Posted February 8, 2005 Share Posted February 8, 2005 Sounds like youre doing something wrong.Try describing exactly what you do to make your CD or ISO file.Do you run nLite after reducing with Goshs method? Link to comment Share on other sites More sharing options...
alhaddar Posted February 8, 2005 Share Posted February 8, 2005 hi Why do I get the message "VOL1: Couldn't find NTLDR"? Link to comment Share on other sites More sharing options...
wherzdaluv Posted February 8, 2005 Share Posted February 8, 2005 so close yet so far away thank you for the reply and just found the nlite series which looks awesome. i am basically creating a set for my personal use. and this has been about 6 weeks in the process. i do not have degree in computers but consider myself literate enuf to know difference between file and folder LOL.all started when i hated the fact being logged into 2 computers with the same login not being able to manipulate C folder thru a mapped drive then the goal began. now using 2003 server was working but was a pain in the booty on drivers issuesthen found the solution http://antiwpa.cjb.net/but along the way found gosh's tweaks with a download called removetook some playin with to make my xp from years ago work from ZERO service packs to integrate up to sp2 integrated versions as followWindows XP(5.1) 2600.0 (Retail)Windows XP(5.1) 2600.1106 (SP1)Windows XP(5.1) 2600.1106 (SP1) <--hotfixedWindows XP(5.1) 2600.2180 (SP2 RTM)next i wanted to duplicate the same series with http://antiwpa.cjb.net/ and the .cmd files found at http://jdeboeck.msfnhosting.com/ <--not locating the link to the download again, but have been doing everything to make it work on sp1 to remove what i choose. had issues with the extra downloads of and creating a working iso but along the line found this site which made that issue work. http://www.msfn.org/board/index.php?showtopic=9478kept it basic and used cdimage to create the ISOlast attempt was to take (oh the versions above are fully working)took 2600.0 and this time ran the .cmds i wanted minus what i said 2 posts agothen ran wpa2.0.2 also did the basics of hex edits from the 9478 post.did recieve a couple errors not finding some files but it was like only 5 of them versus the massive set. and used cdimage to create the rest of the 9478 postfinally was able to make vmware work to my benifit and yes i got past the initial setup all the way thru installed, untill the actual become in first windows after setting up username.errors taken from vmimage are STOP: c000021a {Fatal System Error}The Windows Logon Process system process terminated unexpectedly with a status of 0x0000005 (0x0000000 0x0000000).The system has been shut down.LOOPbut at least didn't get the miles of cannot find the dll. so i am close yet brain is fried like on acid.the exact cdimage is--> cdimage -lXP***_***_1a -t02/06/2005,09:22:00 -bc:\install\xpboot.bin -h -n -m -o c:\install c:\XP***_***_1a.isoi understand why not just use the nLite version which i plan to research deeply, but since i been this deep wanting the version to work, i know that this must have worked before or wouldn't have posted it. and my stubborness knows i can figure this out. basically my goal is to create a series for the beginner like myself to learn for himeself. but long term is to make OS naked yet have the (which i havent even started to figure out yet) $OEM$ of programs I want for me, office, nero, cdimage, magiciso, alcohol(someone figure out how to usb an IV of vodka to jack into LOL) hex workshop, adobe, among others. yet free up the space of the stuff xp thought i needed and dont. not totally sure the best way to post my efforts for known reasons. but i am so close that i may not see it yet, but i know the light is around the next corner. thanks to all sites for information but just a word of advice, maybe make a link called "idiots learning how to power on" to immitate "tweaking your install for dummies" LOL.and no Dahi i did not run nLite but can see the greatness in its simplicity that i will need to read on about. I just hope they dont forget to keep implemented a from the beginning of XP or next Longhorn method for stubborns like myself that want to go back to the beginning and tweak it.thanks for your helpOMG as i tried to preview this post it didnt appear and when returned it sayed page has expired so if this gets posted 2 times i am sorry, but have spent the last hour creating it. i hope i dont have to retype it all. sorry if it posts 2 timeswherzdaluv Link to comment Share on other sites More sharing options...
wherzdaluv Posted February 8, 2005 Share Posted February 8, 2005 starting to play with NLitelooks like a very awesome device to do in a windows window what i was requesting to do in dos. **** if i only found this 6 weeks ago LOLwill try to let you know the out come of my stripping xp naked but would still love input on some of my other issues doing it in dos mode thowherzdaluv Link to comment Share on other sites More sharing options...
wherzdaluv Posted February 8, 2005 Share Posted February 8, 2005 from using vmware looks like i did create my firstworking of 5.1.2600.0now just need to figure out all the options to do what i was wanting from the .cmd's thanks for the turn on to nLite hope learning the $oem$ along with the integrating WPA amd MSI's i want to add dont cause me grief. thanks to creating what the other 95% of the world doesnt realize is possiblethanks againwherzdaluv Link to comment Share on other sites More sharing options...
wherzdaluv Posted February 9, 2005 Share Posted February 9, 2005 OMG I was so deep on making something work for when after Dahi mentioned nLite and stumbled upon it. Now this is one awesome program, i was getting so depressed trying to get what i wanted to happen and there it was my prozac called nLite i bow to your programing of this, i was so much trying to learn what you simplified in a program. dont know if they will pass over this post. but maybe one little addition to add is before iso creation an option to create a notepad of selected options and integrated hotfixes. i like to read my .nfo files of what is done on a particular disk before i install it.wherzdaluv Link to comment Share on other sites More sharing options...
emmanuel d Posted February 9, 2005 Share Posted February 9, 2005 i like this topic verry nicebutt i have to say somme things1 all dese bootfiles in the homedir of the cd this is not cleanso i made a dir called BTLDR wher i put my bootfiles including the bootfile of the cd itselfe. This one a called BTLDR.BINthan you change DISKEMU.CMD like this; cd BTLDR:bootcls print print Press Press any key to boot from CD... getkey 5 esc onkey esc boot 80 onkey entr goto start ; When no key found... goto boot :startclsprintprint ------------------------------------------------------------------------------print XP CD for uprint by goshprint ------------------------------------------------------------------------------print F1=Helpprint 0) WINXP PRO SP2------------------------nlprint 1) WINXP PRO SP2 OEMPreinstall----------nlprint 2) WINXP PRO SP2 unattended-------------nlprint 3) WINXP HOME SP2***********************nlprint 4) WINXP HOME SP2 OEMPreinstall*********nlprint 5) WINXP HOME SP2 unattended************nlprint b) windows xp password hacking in linux<<<print c) Command prompt (geen dos)print r) Rebootprint Esc) Boot first harddiskprintprint Hit the key of choice::mainkey; timeout is 30 seconds, default key is escapegetkey 30 esconkey 0 run PRO1.BINonkey 1 run PRO2.BINonkey 2 run PRO3.BINonkey 3 run HOM1.BINonkey 4 run HOM2.BINonkey 5 run HOM3.BINonkey b run XPPW.BINonkey c quitonkey r rebootonkey f1 goto helponkey esc boot 80; When no key found...goto mainkey;:helpclsprint HELPprint ----printprint Hit the key of your choice (1,2,q,r or <Esc>) in the main menu ->print Hit the key "d" will bring you to the hidden Development menu ->printprint Press any key to return to main menu...getkeygoto start; EOFthe only thing ive chaged in the code isis: cd BTLDRand i have a pressent for you becous i dont want the cdimage.exe in gui versionso i made this linereg add "hkcr\Directory\shell\mkiso" /ve /d "burn iso of this folder" /freg add "hkcr\Directory\shell\mkiso\command" /ve /d "cmd.exe /c if exist \"%%L\BTLDR\BTLDR.BIN\" (cdimage -lmijncd -t08/23/2001,13:00:00 -h -n -m -o -b\"%%L\BTLDR\BTLDR.BIN\" \"%%L\" \"%%L.iso\") else (cdimage -lmijncd -t08/23/2001,13:00:00 -h -n -m -o \"%%L\" \"%%L.iso\")" /fthis wil add burn iso of this folder if you right click on a folderit wil look too: your folder\BTLDR\BTLDR.BIN for the bootfile if not it makes a non bootable diskput cdimage.exe in system32have fun Link to comment Share on other sites More sharing options...
emmanuel d Posted February 9, 2005 Share Posted February 9, 2005 sorry forget to say you put the last code in a bat file and run it Link to comment Share on other sites More sharing options...
tcsdoc Posted February 13, 2005 Share Posted February 13, 2005 I"ve followed the instructions for creating a slimmed down XP unattended install but didn't go for the AIO stuff. I just liked the faster and smaller install. My problem is the installation reboots and XP will start the install process from the beginning instead of continuing the installation. If I remove the CD the installation will proceed (prompting me for the cd).How can I get the unattended install to quit starting from the beginning after each reboot? Link to comment Share on other sites More sharing options...
bucketbuster Posted February 14, 2005 Share Posted February 14, 2005 @tcsdocPut boot.bin in the root of your folder;where also the XP identification files are. Link to comment Share on other sites More sharing options...
tcsdoc Posted February 15, 2005 Share Posted February 15, 2005 Thanks bucketbuster, that did the trick. Don't know how I missed that. Link to comment Share on other sites More sharing options...
tcsdoc Posted February 23, 2005 Share Posted February 23, 2005 Well, I thought that did the trick.... It works fine in VMWare but doesn't on an install on my computer. I have all the required files and have made all the modifications but the problem persists. I can boot from the cd and setup will continue normally until the first reboot. The computer will start over instead of continuing the install.In root I have the following files:vol1.dat (modified to look in the BOOT folder)WIN51WIN51ICWIN51IC.SP2WIN51IPWIN51IP.SP2XPBOOT.BIN (modified to look in the BOOT folder)I have the BOOT, I386 and $OEM$ folders and with VMWare all works great. It's only when I get to an actual computer does the problem occur. Can anyone help in the this problem? Link to comment Share on other sites More sharing options...
nikseresht Posted June 30, 2005 Share Posted June 30, 2005 (edited) hi gosh how can I use bashrat driverpack method 2 with your method in a multi boot cdI want have VOL1 install Xp with driverpack and VOL2 install with out driver pack.My cd folders XP _I386 _$OEM$ WIN51IP WIN51 WIN51ip.SP1 SPnoteVOL1 VOL2 BOOT (contain cd shell boot menu and files)VOL1.DATVOL2.DATWIN51IPWIN51WIN51ip.SP1SPnoteI created XP and VOL1 and VOl2 with gosh method, then copy UWXP_CDROOT folder files(created by bashrat driverpack method 2) to XP folder and run RUN_ME.bat file .when finished I cut and copeid txtsetup.sif and winnt.sif from my I386 folder to VOL1 ,then copied copy_sys_files_to_temp.bat from multi_boot_toolsfolder from driver pack to XP folder and run it adI copied result files to my VOL1 folder.any way my VOL1.DAT(installing with driver pack) work good.but in VOL2.DAT (installing without driver pack) in first of gui modeI receive an error massege: system32\presetup.cmd not found system32\setupORG.exe notfoundwith two reason: these files not exists in I386 folder or in txtsetup.sif not exists blow section [sourceDiskFiles] setupORG.exe=1,,,,2,0,0 presetup.cmd=1,,,,2,0,0if I add these lines to txtsetup.sif in VOL2 folder my VOL2 mode installationwill install windows xp with driver pack.Whats your idea about this problem.( I test with bashart driver pack method 1 I didn't have any problem it need largespace and I don' like that) Edited June 30, 2005 by nikseresht Link to comment Share on other sites More sharing options...
nikseresht Posted July 3, 2005 Share Posted July 3, 2005 thank you gosh for your late in my answer,I solved it myself. Link to comment Share on other sites More sharing options...
Thauzar Posted July 3, 2005 Share Posted July 3, 2005 Just to be sure, VALUEADD and SUPPORT folders, if removed from ua cd, will not stop me from using the cd to setup networks on other platforms? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now