chipmat31 Posted January 31, 2007 Share Posted January 31, 2007 Hello all. This is my first post on the forum & first foray into the world of WinPE/BartPE. I am trying to utilize the BartPE Ghost32 plug-in as an alternative to .dos boot disks. I followed all the guides I could find & built a BartPE disk using PE Builder 3.1.10a. After boot to PE, I attempt to start network support. I choose a static network profile, then receive the message, "Registering network components...", followed by "Installing network adapters..." & finally receive an error message, "Unable to install network adapters."I want to install two network drivers on the disk -- Broadcom 57xx & Intel Gigabit, so I created the following directories:C:\pebuilder3110a\drivers\Net\Broadcom with the contents: b57win32.cat b57win32.inf b57xp32.sysC:\pebuilder3110a\drivers\Net\Intel with the contents: e1e5231.cat e1e5231.din e1e5231.inf e1e5231.sys e1000msg.dll e1000325.cat e1000325.din e1000325.inf e1000325.sys etco32.dll intelnic.dll nicco.32.dll nicin32.dll prounstl.exeAny help or guidance would be much appreciated.-chipmat31 Link to comment Share on other sites More sharing options...
KRYOGENIUS Posted February 1, 2007 Share Posted February 1, 2007 HelloWelcome to msfn ! I hope you'll find answers.So about this problem, here some questionsWhich os do you use ? XP or 2003 ?The network drivers are they for XP or 2003 ? Try to get them update going to a drivers website.First see, it seem you put them into the right directories. Link to comment Share on other sites More sharing options...
uid0 Posted February 1, 2007 Share Posted February 1, 2007 You could try using a driverpack instead from www.ubcd4win.com Link to comment Share on other sites More sharing options...
KRYOGENIUS Posted February 1, 2007 Share Posted February 1, 2007 HelloYes drivers pack are useful if you have to use bart cd on several configuration. If you have only one or two even three networds cards, manually integration of drivers is better, and save space !Even you have one hundred computers, there are few chances that you have one hundred different network cards !++ Link to comment Share on other sites More sharing options...
uid0 Posted February 1, 2007 Share Posted February 1, 2007 Yeah, but the advantage here is that they have been tested and are hopefully working Link to comment Share on other sites More sharing options...
chipmat31 Posted February 2, 2007 Author Share Posted February 2, 2007 HelloWelcome to msfn ! I hope you'll find answers.So about this problem, here some questionsWhich os do you use ? XP or 2003 ?The network drivers are they for XP or 2003 ? Try to get them update going to a drivers website.First see, it seem you put them into the right directories.I'm using XP Pro & the drivers were downloaded as a plug-in from another PE support forum page. I'll try compiling the drivers from the manufacturers website.Thanks! Link to comment Share on other sites More sharing options...
scankurban Posted February 2, 2007 Share Posted February 2, 2007 You can try infcachebuild tool http://heanet.dl.sourceforge.net/sourcefor...cheBuild-1.8.7z.Its rebuilding inf folder.And Files must be placed inf files to inf folder,sys files to system32\drivers folder,all other files to system32 folder.I have bartpe with more than 130 lan-wan driver,networking always working. Link to comment Share on other sites More sharing options...
chipmat31 Posted February 2, 2007 Author Share Posted February 2, 2007 (edited) I pulled the drivers off of the PC manufacturer's driver disk & now BartPE recognizes & installs the network adapters.Thanks to all that replied!!! Edited February 2, 2007 by chipmat31 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now