setupdll error code 5001

[hulkviper]

Hope someone can help.

Can't figure out what I did wrong this time :S

1. Getting an error when trying to run the driver setup program (InstallShield) for sound and graphics drivers (ASUS motherboard).

2. In Device Manager I see 1 unknown device.

When checkin properties I see.

Intel® ICH8/ICH8R Family LPC Interface Controller - 2810

Tried installing the latest intel chipset drivers with no luck.

Should have tested this install more in VMware but it seemed ok.........

nLite 1.3beta

hv InstallShield problems.7z includes:

Last Session, few screenshots and detailed Everest description in a htm file

http://www.bestsharing.com/files/F0yUqJi19...roblems.7z.html

Edited December 25, 2006 by hulkviper

[nuhi]

There are many reports on the net, try searching, let me know how it goes.

Try this:

http://forums.eidosgames.com/showthread.php?t=63226

edit: try this too

http://www.softpedia.com/progDownload/Wind...load-18442.html

[hulkviper]

none work

----------------------------

But I fixed it myself

This time I kept:

;# Hardware Support #

ALI 1535 SMBus Host Controller

USB Video and Ethernet

;# Operating System Options #

16-bit support

Application compatibility patch

;# Services #

Network Provisioning

-----------------------------

InstallShield is probably workin now because of

16-bit support

Application compatibility patch

Intel® ICH8/ICH8R Family LPC Interface Controller - 2810

Comes up when you enable ACPI 2.0 in BIOS.

Edited December 28, 2006 by hulkviper

[hulkviper]

Well this is strange, the same error comes up with nLite 1.3RC

Now in 1.3 RC it's something else

What can it be :S

I'm glad I know the answer, at least it helped

1.

The user creation in nLite isn't workin fully as it should for me.

When creating a new user (in my case "the irf") the name was created as Administrator: User

Run, control userpasswords2 in run, change to only Administrator

2.

If you set temp folder to anything else than C: it wont work if that partition doesn't exist or if it isn't formated.

I always use D:\zTemp

3

http://support.installshield.com/error_central/

that might be useful, if not download ikernelupdate.exe.

-----------------------------------------------------------------------------------------------

A little correction from the last post:

>> Intel® ICH8/ICH8R Family LPC Interface Controller - 2810

>> Comes up when you enable ACPI 2.0 in BIOS.

Correction:

This is not exactly correct.

It's also because of

;# Hardware Support #

Battery

Seems like Battery isn't only for Laptops/Notebooks

Seems like it has something to do with UPS service also.

In my case I need both so the unknow device is installed properly