Microsoft BDA Driver Architecture compatibility

[QNX]

Since I’ve bought DVB-S card with BDA driver and I can’t use it with nlite’d Windows Xp sp2.

Looks lite the driver installer in addition to main inf installing it's own components and interact with BDA part or something from windows

I’ve made already several different installations, trying to get the needed components, but no use

My last setting file is attached bellow

help

Last_Session.rar

Edited October 16, 2006 by QNX

[QNX]

Look’s like this is the similar problem http://www.msfn.org/board/index.php?showtopic=83313

But without clear solution

Ok, I’ll ask otherwise

What I’ve should leave from the component in nLite to leave compatibility with Microsoft BDA Driver Architecture?

Edited October 16, 2006 by QNX

[QNX]

any ideas? there are too many BDA devices already, I don’t believe that no one face the challenge

[dexter.inside]

You tried looking in DirectX redist? there's a BDA.CAB there, maybe it contains what you need

[QNX]

yeap, there are needed files, but why they're missing in the installed windows distro? I ‘cant cut dx, оr? The problem is in the impossibility of device setup after processing with nlite (BDA.cab can’t help), and I don’t know what I should kept…

[nuhi]

Is there a particular reason for so many files in the KeepFiles section?

Have you been missing files during install or it's just like a precaution to be sure that those files won't be removed?

If it's second then I don't recommend to keep that list, just put files which you are sure that are removed.

[QNX]

Is there a particular reason for so many files in the KeepFiles section?

nope

Have you been missing files during install

no, i don't, it's just a precaution, but looks like this is not working

anyway, with this components list nothing is working as it should, I’m sitting already 2 weeks with "broken" tuner ))

[nuhi]

Remove all files from those boxes, be sure to leave Video Capture as you did and any other codecs you encounter.

Get the newest driver and codec for your tuner.

For example my Hauppauge tuner needs 3 drivers to work (usb, device and special mpeg codecs), nothing related to nlite removals.

[QNX]

i'dont need any codecs

i've already try to leave only video capture support and teletext codec’s - no use, i can't even install driver properly

in full windows version driver info from this working card show's many *bda* files from DX, which i don't have in the nlited distro

so in fact this card working when i don't use nlite

[nuhi]

BDA files are removed with the Video Capture component, my tuner works if I leave that...

[QNX]

i give up, more than month past already, and i still can't use my sat card on nlited windows xp )))

i've left capture device support, it's working as capture device in virtualdub and other software, but still can't work as BDA device with it's own software - ComproDTV and ProgDVB

errors and settings from nlite 1.2.1 attached below

i don't know what to do

p.s.

http://www.german-nlite.de/lofiversion/index.php/t2051.html

something similar on German with pinnacle card

http://www.avsforum.com/avs-vb/showthread.php?t=744292

more

http://www.dvbviewer.com/forum/lofiversion...php/t14212.html

and with fusionhdtv

Last_Session.zip

Edited November 21, 2006 by QNX

[QNX]

ok.. that's it, card replaced with TT 1401, which working in the network controller mode...

[nuhi]

So you have replaced the card to have lite windows?

Sorry that no one had any info on that problem since it is really weird one and unique.

[QNX]

not actually replaced, i just switched 2 card in 2 PC's

and continue experiments

and a miracle was happen

i've found that BDA requires some components from the media center but this was usual windows xp sp2

nevertheless it working now

[mj084]

i've git still the same problem, looking here:

http://www.german-nlite.de/index.php?showtopic=9394

so which component needed for getting full function of dvb-s tv card?

media center?