The Glimmerman Posted June 9, 2006 Share Posted June 9, 2006 Hi there I've extracted the nforce4 AMD Package. (Deleted NAM.exe)Then ran the setup with -r switch.Copied the iss file to the setup directory.With 7z created a compressed file.and with a sfx and config.txt (code below) created an exe.;!@Install@!UTF-8!RunProgram="Setup -s";!@InstallEnd@!ISS File[InstallShield Silent]Version=v7.00File=Response File[File Transfer]OverwrittenReadOnly=NoToAll[{EFB7D050-CAD2-11D4-B34D-00105A1C23DD}-DlgOrder]Dlg0={EFB7D050-CAD2-11D4-B34D-00105A1C23DD}-SdWelcome-0Count=1[{EFB7D050-CAD2-11D4-B34D-00105A1C23DD}-SdWelcome-0]Result=1The new executable works fine. But. There's always a but. After the installation it reboots. I don't want him to reboot.Because its in the middle of my runonceEx.Is there a way to stop the reboot.Is tried to add some entries to the iss file. Like SdFinished - reboot etc etc.No luck.I must say i use bashrats' driverpacks. thus the chipset drivers are installed.But I question myself of the SW IDE drivers are installed. Cause after the unattended installation my pc freezes a couples of secs when it's busy. After a normal setup of the nforce4 package, all works fine.Nevertheless I hope someone can help me out. Link to comment Share on other sites More sharing options...
The Glimmerman Posted June 23, 2006 Author Share Posted June 23, 2006 Nobody ? Link to comment Share on other sites More sharing options...
Sonic Posted June 24, 2006 Share Posted June 24, 2006 I havn't found solution too ... I try with nForce all series package.It seems to be an IDE package will cause the reboot.Try ti re-run your install without IDE folder. Link to comment Share on other sites More sharing options...
The Glimmerman Posted June 27, 2006 Author Share Posted June 27, 2006 Ok. but the IDE package is the important one. I believe its needed if you have a raid set. And I have 2. But I will try and maybe I can found a workaround for the IDE package.Thx for the work Link to comment Share on other sites More sharing options...
Sonic Posted July 1, 2006 Share Posted July 1, 2006 I have read the "reboot required" or not isn't specified in the .inf file now, it's system which detect if reboot is necessary or not. Perhaps there is way to force to no reboot but I havn't found yet ... Post any results ! Link to comment Share on other sites More sharing options...
The Glimmerman Posted July 2, 2006 Author Share Posted July 2, 2006 I know. Still trying to get it too work Link to comment Share on other sites More sharing options...
The Glimmerman Posted July 9, 2006 Author Share Posted July 9, 2006 New drivers are out.Let's give them a trynForce4 AMD v6.86 Link to comment Share on other sites More sharing options...
darks0ul Posted July 10, 2006 Share Posted July 10, 2006 new drivers reboots Link to comment Share on other sites More sharing options...
Sonic Posted July 10, 2006 Share Posted July 10, 2006 IMHO, the reboot is initiated by windows pnp mechanism which is detect the IDE require a reboot (and all futures updates will have the problem) ... but how the original setup can reboot later, if we find we have a solution perhaps ... Link to comment Share on other sites More sharing options...
The Glimmerman Posted July 13, 2006 Author Share Posted July 13, 2006 I agree.It's frustating. Maybe there is a solution in the near future. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now