yodafr Posted May 27, 2006 Share Posted May 27, 2006 Hello In fact, I'd like to register dll "regsvr32 name.dll" during the installation without using a batch file.If I could not use GuiRunOnce, it'd be nice too .How can I do ?Thanks Sorry for my English... Link to comment Share on other sites More sharing options...
yodafr Posted May 28, 2006 Author Share Posted May 28, 2006 Nobody ? Link to comment Share on other sites More sharing options...
ZcWorld Posted May 28, 2006 Share Posted May 28, 2006 ok the way i would do that it is using Nlite there is a tab called unattedned setup -> runOnceput in there something like this%source%\settings\runonce.cmdin the runonce.cmd file you put in ur commond thereits like a bat file ... type of thinghope its helps Link to comment Share on other sites More sharing options...
yodafr Posted May 28, 2006 Author Share Posted May 28, 2006 Thanks, but it's the same thing as a .bat file .I'd like to put regsvr32 directly in a file, without a dos file . Link to comment Share on other sites More sharing options...
T D Posted May 28, 2006 Share Posted May 28, 2006 (edited) Directly put a file called CMDLINES.TXT in $OEM$ and in it type:[COMMANDS]REGSVR32 xxxxxxx.DLLCMDLINES is parsed around T-12, a bit after the middle of the Gui part of setup.But $OEM$ folders have to work, so not a lot of use in multboot dvds.Hope this helped! Edited May 28, 2006 by T D Link to comment Share on other sites More sharing options...
ZcWorld Posted May 28, 2006 Share Posted May 28, 2006 are you using Nlite ? or not at allif so there is a runonce tab just add it therei take it ur using XP or 2000there is a sub dos there still Link to comment Share on other sites More sharing options...
yodafr Posted May 28, 2006 Author Share Posted May 28, 2006 Thanks for your answers but, I don't want to use runonce, Guirunonce, .bat file, .cmd file... lol.I'd like dll to be registered like the others, without using regsvr32 somewhere.Do you understand ? Link to comment Share on other sites More sharing options...
ZcWorld Posted May 28, 2006 Share Posted May 28, 2006 i understand what your getting at but i dont know how to do that any other way sorry Link to comment Share on other sites More sharing options...
yodafr Posted May 28, 2006 Author Share Posted May 28, 2006 Ok, thanks . Link to comment Share on other sites More sharing options...
jdoe Posted May 28, 2006 Share Posted May 28, 2006 (edited) I'd like dll to be registered like the others, without using regsvr32 somewhere.You want it the hard way You'll have to work hard on this one but I give a way to do it.1) You need to unlock Windows XP setup and for that you need a patched syssetup.dll2) You must edit the [OleControlDlls] section of syssetup.inf and add the file you want to register.I can give you the patched syssetup.dll but for the rest, like I said, you'll have to do some work because I don't know what you are trying to do.Unlock Windows XP Setup Edited May 28, 2006 by jdoe Link to comment Share on other sites More sharing options...
yodafr Posted May 28, 2006 Author Share Posted May 28, 2006 On the website there's the french version .I'll have a look on that method this evening probably.Thanks ! . Link to comment Share on other sites More sharing options...
Bilou_Gateux Posted May 29, 2006 Share Posted May 29, 2006 (edited) I'd like dll to be registered like the others, without using regsvr32 somewhere.You want it the hard way You'll have to work hard on this one but I give a way to do it.1) You need to unlock Windows XP setup and for that you need a patched syssetup.dll2) You must edit the [OleControlDlls] section of syssetup.inf and add the file you want to register.I can give you the patched syssetup.dll but for the rest, like I said, you'll have to do some work because I don't know what you are trying to do.Unlock Windows XP Setup L'Azimuté !I would like to do Windows Server 2003 w/SP1 ENU syssetup.dll patching automated with XVI32 script run from the command line. I need to locate the offset where to change some bits.File compare between original and nLite patchedSearch for differences1. B:\syssetub.dll: 1,047,040 bytes2. B:\syssetup.dll: 1,047,040 bytesOffsets: hexadec. 148: 65 F7 149: CE F135CB3: 8B 3335CB4: FF C035CB5: 55 C235CB6: 8B 0435CB7: EC 0036F45: 56 3336F46: 56 C036F47: 56 EB36F48: 56 295B4FE: 75 905B4FF: 07 9013 difference(s) found.which one should i change? I have PM nuhi hoping he would find some time to answer.Instead of storing two copy SYSSETUB.DL_ and SYSSETUP.DL_ in source folder and renaming it with nlhive.inf at 1st GUI launch[Version]Signature = "$Windows NT$"[nLite]HKCU,"SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce","nlsf",0x00020000,"cmd.exe /C move /Y ""%SystemRoot%\System32\syssetub.dll"" ""%SystemRoot%\System32\syssetup.dll"""we can try to reverse patch on the patched DLL and get back to original unpatched syssetup.dllCould you help me to write the xsc script. Or for starting with this stuff, is the example for patching XP SP2 ENU syssetup.dll according to infos posted at your patches Webpage correct.something like:%ProgramFiles%\xvi32\XVI32.exe %temp%\syssetup.dll /S=%ProgramFiles%\xvi32\syssetuprepl.xsc 33679 73 72REM goto offset %1ADR $%1REPLACE %2 BY %3Merci pour l'aide que tu pourras m'apporter, ami francophone de l'autre côté de l'océan.Thanks for help. Edited May 29, 2006 by Bilou_Gateux Link to comment Share on other sites More sharing options...
jdoe Posted May 29, 2006 Share Posted May 29, 2006 L'Azimuté !I would like to do Windows Server 2003 w/SP1 ENU syssetup.dll patching automated with XVI32 script run from the command line. I need to locate the offset where to change some bits.File compare between original and nLite patchedSearch for differences1. B:\syssetub.dll: 1,047,040 bytes2. B:\syssetup.dll: 1,047,040 bytesOffsets: hexadec. 148: 65 F7 149: CE F135CB3: 8B 3335CB4: FF C035CB5: 55 C235CB6: 8B 0435CB7: EC 0036F45: 56 3336F46: 56 C036F47: 56 EB36F48: 56 295B4FE: 75 905B4FF: 07 9013 difference(s) found. which one should i change? I have PM nuhi hoping he would find some time to answer.Instead of storing two copy SYSSETUB.DL_ and SYSSETUP.DL_ in source folder and renaming it with nlhive.inf at 1st GUI launch[Version]Signature = "$Windows NT$"[nLite]HKCU,"SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce","nlsf",0x00020000,"cmd.exe /C move /Y ""%SystemRoot%\System32\syssetub.dll"" ""%SystemRoot%\System32\syssetup.dll"""we can try to reverse patch on the patched DLL and get back to original unpatched syssetup.dllCould you help me to write the xsc script. Or for starting with this stuff, is the example for patching XP SP2 ENU syssetup.dll according to infos posted at your patches Webpage correct.something like:%ProgramFiles%\xvi32\XVI32.exe %temp%\syssetup.dll /S=%ProgramFiles%\xvi32\syssetuprepl.xsc 33679 73 72REM goto offset %1ADR $%1REPLACE %2 BY %3Merci pour l'aide que tu pourras m'apporter, ami francophone de l'autre côté de l'océan.Thanks for help.@Bilou_GateuxI replied to your PM before reading this post. Now I know what you are trying to do.Maybe I'm not aware of something but what is the problem with keeping the patched syssetup.dll after the installation.About reversing the patch, it could be done but I think WFP will block writing the dll.Like I said in the PM I sent you, it is easy to write a very small program (something like 3-4Kb) that will patch and unpatch from command line with a switch like /P and /U but does Windows will let writing to it without complains. I don't know. Link to comment Share on other sites More sharing options...
Bilou_Gateux Posted May 30, 2006 Share Posted May 30, 2006 (edited) @jdoeThanks.Here the answer you give through PM.À l'offset hexadécimal 36F29 ou (225065 décimal), tu trouveras les deux bytes suivant "737A" ce qui représente "jnb 5B3E7BA5" en assembleur (5B3E7BA5 étant où le jump doit aller pour éviter la vérification de la signature de syssetup.inf).Donc pour éviter cette vérification on n'a qu'à changer jnb par jb ce qui veut dire en résumé qu'à l'offset 36F29 il faut changer 73 par 72.If we change jnb 5B3E7BA5 to jb 5B3E7BA5 then we skip the verification and our modified SYSSETUP.INF is not recognize as an invalid file. This mean that only one byte patching is needed. So, at offset 36F29 you should read and write the following :73 7A : jnb 5B3E7BA5Changed by72 7A : jb 5B3E7BA5[EDIT]Offset address value is for both 2003 Server w/ SP1 ENU or FRA syssetup.dll.[/EDIT]And a good hexeditor recommendation from jdoe: FRee Hex EDHaven't yet read the help file to check if command line support (unattended) exists?nLite patched syssetup.dll add more features:Added automatic hacking of syssetup.dll for OOBE disabling (if you choose to remove it, this will not crack Activation).SFC is entirely disabled too simply by copying hacked dll from Data and adjusting registry. Edited June 1, 2006 by Bilou_Gateux Link to comment Share on other sites More sharing options...
Bilou_Gateux Posted March 17, 2007 Share Posted March 17, 2007 (edited) With the release of Windows Server 2003 Service Pack 2, syssetup.dll binary has been updated.@jdoecan you give us the new offset address and data value to change. Edited March 17, 2007 by Bilou_Gateux Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now