Virtual Server 2005 and routing

[rakem]

In virtual server 2005 i have set up a virtual environment consisting of 3 DC's in different sites all being DC's of a central domain and all are global catalogs.

I need to test the subnets now, the current IP range im using is lets say 10.1.20.0 i to test my subnets i need to change two of the servers IP to a different subnet e.g. 10.1.21.0 and 10.1.22.0 but then there wont be any communication since I dont have a router to route the traffic.

So my question is, is there some type of virtual router software that i can use for this or is there a feture in virtual serve 2005 that allows this or is there any way at all that i can test this in my virtual envorinment??

thanks

[Minus Human]

Not sure but why not setup an additional server with 3 virtual network Interfaces. Configure the IP's as follows

NIc1=10.1.20.x

NIc2=10.1.21.x

NIc3=10.1.22.x

And enable Routing through RRAS on that server.

That should do it

Minus Human

[fizban2]

having a third machine with RRAS runnig as a router would be a good way to do it, no other options in VS 2005 that would help you...