Jump to content

missing files


gdkehl

Recommended Posts

Hello,

I originally had missing file problems with a win2k unattend install that was fixed by using the original driver.cab file instead of the one from the sourcess folder.

I have another missing file problem; this time with xp and using the original driver.cab file won't fix. The missing files are: amdk7.sys, mssbios.sys, and tunmp.sys.

I did a search for this and came up empty in the forum. However, I found this

http://support.microsoft.com/kb/q306458

Any suggestions?

If I slip q306458 will this fix the prob?

thanks

Link to comment
Share on other sites


I know these are dumb questions, but I have seen bad copies from a cd to hard drive. Are you sure that your original source driver.cab and your sp4.cab are ok? Have you tested your source folder to ensure that your source is OK prior to slipstreaming? Any luck on attaching your error_report file? Can't do much more without it.

Link to comment
Share on other sites

- Other errors, not reported by HFNETCHK

- Zip the information above and this file and post the info on the board listed on top.

=========================DO NOT ALTER THE SECTION BELOW========================

HFSLIP Version -

HFSLIP_60203.CMD

Your path - F:\work\hfslip\

OS you are slipstreaming - XP

Language you are working with - English

==============================================================================

The files in your FIX folder -

Names of the files in your HF folder:

MP10Setup.exe

Q306458_WxP_SP1_x86_enu.exe

WindowsInstaller-KB893803-v2-x86.exe

WindowsMedia-KB891122-x86-ENU.exe

WindowsUpdateAgent20-x86.exe

WindowsXP-KB873339-x86-ENU.exe

WindowsXP-KB885250-x86-ENU.exe

WindowsXP-KB885835-x86-ENU.exe

WindowsXP-KB885836-x86-ENU.exe

WindowsXP-KB886185-x86-enu.exe

WindowsXP-KB887472-x86-enu.exe

WindowsXP-KB887742-x86-ENU.exe

WindowsXP-KB887797-x86-enu.exe

WindowsXP-KB888113-x86-ENU.exe

WindowsXP-KB888302-x86-ENU.exe

WindowsXP-KB890046-x86-ENU.exe

WindowsXP-KB890859-x86-ENU.exe

WindowsXP-KB891781-x86-ENU.exe

WindowsXP-KB893066-v2-x86-ENU.exe

WindowsXP-KB893756-x86-ENU.exe

WindowsXP-KB896358-x86-ENU.exe

WindowsXP-KB896422-x86-ENU.exe

WindowsXP-KB896423-x86-ENU.exe

WindowsXP-KB896424-x86-ENU.exe

WindowsXP-KB896428-x86-ENU.exe

WindowsXP-KB898461-x86-ENU.exe

WindowsXP-KB899587-x86-ENU.exe

WindowsXP-KB899589-x86-ENU.exe

WindowsXP-KB899591-x86-ENU.exe

WindowsXP-KB900725-x86-ENU.exe

WindowsXP-KB900930-x86-ENU.exe

WindowsXP-KB901017-x86-ENU.exe

WindowsXP-KB901214-x86-ENU.exe

WindowsXP-KB902400-x86-ENU.exe

WindowsXP-KB904706-v2-x86-ENU.exe

WindowsXP-KB905414-x86-ENU.exe

WindowsXP-KB905749-x86-ENU.exe

WindowsXP-KB905915-x86-ENU.exe

WindowsXP-KB908519-x86-ENU.exe

WindowsXP-KB910437-x86-ENU.exe

WindowsXP-KB912919-x86-ENU.exe

WindowsXPMediaCenter2005-KB900325-usa.exe

wmcsetup.exe

Names of the files in your HFCABS folder:

Names of the files in your HFSVPK folder:

Names of the files in your HFSVPK_SW folder:

Names of the files in your HFTOOLS folder:

==============================================================================

Link to comment
Share on other sites

I tried Q306458_WxP_SP1_x86_enu.exe from MS, no luck there. If I use my original cd everything works and there is not an amdk7.sys inside driver.cab.

I beleive one of the updates slipped into i386 makes amdk7.sys necessary. The hard part is figuring out which one. My xp cd works and my unattend prior to adding hotfixes works.

This is the post from the problem I had with win2k

http://www.msfn.org/board/index.php?showtopic=58652&st=0

That was fixed by using the original driver.cab. hfslip's driver.cab was only half the size and missing files.

Now, with XP the hfslip driver.cab was about 3MB smaller but the original driver.cab doesn't have the files the system is looking for during install.

Link to comment
Share on other sites

A new version already.

Super-Magician, I have tried both driver.cab files after using hfslip; neither work. Before using hfslip my system wasn't looking for the 3 files it is now looking for. I'll try the new version of hfslip and see if I get the files my system reports as missing.

Link to comment
Share on other sites

just ran new version

COMPLETE THIS FILE AND ATTACH IT TO THE MESSAGEBOARD IF YOU RUN INTO PROBLEMS.

http://www.msfn.org/board/index.php?showforum=129

=======================YOU MUST COMPLETE THIS SECTION==========================

- Make a hfnetchk log - this is the COMMANDLINE HFNETCHK -V -F C:\WU.TXT

- Other errors, not reported by HFNETCHK

- Zip the information above and this file and post the info on the board listed on top.

=========================DO NOT ALTER THE SECTION BELOW========================

HFSLIP Version -

HFSLIP_60206.CMD

Your path - F:\work2\HFSLIP\

OS you are slipstreaming - XP

Language you are working with - English

==============================================================================

The files in your FIX folder -

Names of the files in your HF folder:

MP10Setup.exe

WindowsInstaller-KB893803-v2-x86.exe

WindowsMedia-KB891122-x86-ENU.exe

WindowsUpdateAgent20-x86.exe

WindowsXP-KB873339-x86-ENU.exe

WindowsXP-KB885250-x86-ENU.exe

WindowsXP-KB885835-x86-ENU.exe

WindowsXP-KB885836-x86-ENU.exe

WindowsXP-KB886185-x86-enu.exe

WindowsXP-KB887472-x86-enu.exe

WindowsXP-KB887742-x86-ENU.exe

WindowsXP-KB887797-x86-enu.exe

WindowsXP-KB888113-x86-ENU.exe

WindowsXP-KB888302-x86-ENU.exe

WindowsXP-KB890046-x86-ENU.exe

WindowsXP-KB890859-x86-ENU.exe

WindowsXP-KB891781-x86-ENU.exe

WindowsXP-KB893066-v2-x86-ENU.exe

WindowsXP-KB893756-x86-ENU.exe

WindowsXP-KB896358-x86-ENU.exe

WindowsXP-KB896422-x86-ENU.exe

WindowsXP-KB896423-x86-ENU.exe

WindowsXP-KB896424-x86-ENU.exe

WindowsXP-KB896428-x86-ENU.exe

WindowsXP-KB898461-x86-ENU.exe

WindowsXP-KB899587-x86-ENU.exe

WindowsXP-KB899589-x86-ENU.exe

WindowsXP-KB899591-x86-ENU.exe

WindowsXP-KB900725-x86-ENU.exe

WindowsXP-KB900930-x86-ENU.exe

WindowsXP-KB901017-x86-ENU.exe

WindowsXP-KB901214-x86-ENU.exe

WindowsXP-KB902400-x86-ENU.exe

WindowsXP-KB904706-v2-x86-ENU.exe

WindowsXP-KB905414-x86-ENU.exe

WindowsXP-KB905749-x86-ENU.exe

WindowsXP-KB905915-x86-ENU.exe

WindowsXP-KB908519-x86-ENU.exe

WindowsXP-KB910437-x86-ENU.exe

WindowsXP-KB912919-x86-ENU.exe

WindowsXPMediaCenter2005-KB900325-usa.exe

wmcsetup.exe

Names of the files in your HFCABS folder:

Names of the files in your HFSVPK folder:

Names of the files in your HFSVPK_SW folder:

Names of the files in your HFTOOLS folder:

==============================================================================

soucress\i386\driver.cab does not have the files my system is looking for.

Link to comment
Share on other sites

i386 in the sourcess folder does not contain any sp.cabs
That's the point of merging the cabs. Is it there in the SOURCE, and does that cab contain the three files you are missing?
should there be a sp3.cab that hfslip created in the sourcess\i386 folder???
No. HFSLIP doesn't create a numbered cab file. If you choose merging option D, E or F, you do get an additional spx.cab file if required.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...