whatsyourhandle Posted January 25, 2006 Share Posted January 25, 2006 I have a bootable PE install using RIS. This works fine for intel nics etc. I have some new machines (intel D915GUX MB) that have Marvell Yukon NICs that refuse to boot with this install I have tried copying the drivers manually into their locations with no success. I have tried RogueSpears autoRIS drivers aswell with no sucess.I do not want to rebuild the PE if i can help it. I am quite new to this so the more specific the better Any help is much appreciated Link to comment Share on other sites More sharing options...
mats Posted January 26, 2006 Share Posted January 26, 2006 The first thing is to tell us what your problem is. Do you get "the selected image does not contain ......" or is it just the nic that won't wotk in pe Link to comment Share on other sites More sharing options...
whatsyourhandle Posted January 29, 2006 Author Share Posted January 29, 2006 Yes I get "the selected image does not contain ......" message. The same drivers work fine if i boot PE from CD rather than RIS.Thanks in advance Link to comment Share on other sites More sharing options...
gadget Posted February 6, 2006 Share Posted February 6, 2006 (edited) see http://www.msfn.org/board/index.php?showtopic=48392&hl=yukonsearch here or microsoft to add nic drivers to the oem$ directories as well. Been covered many times here before.edoit: orhttp://www.msfn.org/board/index.php?showto...$oem$ Edited February 6, 2006 by gadget Link to comment Share on other sites More sharing options...
bluescreens Posted February 10, 2006 Share Posted February 10, 2006 (edited) see http://www.msfn.org/board/index.php?showtopic=48392&hl=yukonsearch here or microsoft to add nic drivers to the oem$ directories as well. Been covered many times here before.edoit: orhttp://www.msfn.org/board/index.php?showto...$oem$That *will* help for GUI-mode drivers (34 mins into install when it prompts for domain name, etc.) but won't help OP with his problem, which is that appropriate drivers don't (apparently) exist in i386. OP, add appropriate drivers for your card into i386\system32\drivers folder. Put the .sys file into the \drivers folder as appropriate. Reboot & try again. Edited February 10, 2006 by bluescreens Link to comment Share on other sites More sharing options...
pigdog Posted February 13, 2006 Share Posted February 13, 2006 What I normally do in the event of the driver error in the initial phase of the windows installation is1. copy the drivers to the i386 folder of the approriate RIS image2. Open the command prompt3. Stop the binlsvc service by typing "net stop binlsvc"4. Start the service by typing "net start binlsvc"5. Exit the command promptIf the correct inf and other files needed were copied the RIS image should now start to workIf not try having a look on the net I know some cards like the intel pro 100/1000 have dirvers speciallywritten for RIS and without the RIS drivers the system just will not installGood luckPigdig Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now