Jump to content

My computer on the way


gdogg

Recommended Posts

Two Cooler Master Neon Blue LED 120MM Case Fan 3PIN 22DBA 1220RPM 42.734CFM 3PINS

Four - Samsung Spinpoint P Series 250GB SATA2 NCQ 7200RPM 8MB 8.9MS FDB Hard Drive 3 Year MFR Warranty

DFI LANParty UT NF4 SLI-DR Expert ATX S939 NFORCE4 SLI DDR 2PCI-E16 SATA RAID Sound LAN Motherboard

Two - EVGA E-GEFORCE 7800GT CO 470MHZ PCI-E 256MB 256BIT GDDR3 Dual DVI-I HDTV VIVO SLI Ready Video Card

Mushkin Redline XP PC4000 1GB 2X512MB DDR500 184PIN DIMM Dual Channel Memory Kit W/ RAM Sink

OCZ PowerStream SLI 600 Watt ATX12V V2.01 BTX 24PIN Low Noise Power Supply

AMD Opteron 165 Dual Core Processor S939 Denmark 1.8GHZ 2MB L2 Cache 90NM Retail

Thermalright SI-120 S478/754/939 120MM Aluminum Heatpipe Cooler Fan Not Included

AeroCool Xtreme Turbine Blue 120MM Case Fan 1800RPM 89.39CFM 32.46DBA W/ 4 Blue LED

Samsung SH-W162C Dvdrw 16X8X16 Dual Layer 5X/4X DVD Writer Black /W SW OEM

Case is still undesided.

All to be connected to my new 32" LCD TV.

anyone else got any ideas to help me in my overclocking project?

Link to comment
Share on other sites


cant wait to see the pics!!

get this case, a few of us here have it, including me

http://www.newegg.com/Product/Product.asp?...N82E16811129154

i rly cant wait to see what you can get that thing to, 2.6 definetly, 2.7 is a good chance, 2.8 not so much. but this all depends on what stepping/week you get.

i have the same video card, not in sli, and im able to play every single game that i have on full settings, but it is overclocked to 485/1150.

Link to comment
Share on other sites

nice, the card I picked have a lifetime warranty, and come pre-overclocked

I am even allowed to change the fans on them, only thing I cant do is damage them.

470/1100 I believe, hope to get 500/1200 in sli.

that way , I beat a gtx sli setup for sure.

Hope to get that system up soon.

Thanks for the advice on the case.

One question though, do you thing the si-120 will fit in that wind tunnel.

otherwise , I am still stuck on the CMStacker830 then.

btw I got great boxing day deals at ncix

the card were, 379.88 each, with a $35 mail in rebate each, and free quake 4 each.

So hopefully I get my cousin a new game, as I am gonna be playing fear once I get this setup running.

Edited by gdogg
Link to comment
Share on other sites

  • 1 month later...
get this case, a few of us here have it, including me

http://www.newegg.com/Product/Product.asp?...N82E16811129154

i have to disagree on that suggestion.. i bought my P180 in november, and since then i have had both side panels, the front panel, and the 2 25mmx120mm replaced (free of charge). the panels all had the silver portion seperate from the surrounding area aka if you look down one of the panels or the door, you see a nice wavy line. both fans started screaching after about 2 months use. while a very nice looking case when i got it, im just waiting for the replacements to fail....

i'll be picking up a new case, but i'm waiting for OCZ to make an official annoucement on their phase change system before i drop cash on a new case.

Link to comment
Share on other sites

ok, once I get access to my brother camera, expect, like 50 pics of me building the machine.

about an hour, or so ...

i promise not to host all em on msfn :P

Edited by gdogg
Link to comment
Share on other sites

WARNING These images are huge !!!

be careful when viewing full sized images, only do it if , you have a 1Mbit or more connection

Ok now on with the pics ...

http://img204.imageshack.us/img_viewer_fra...onmydesk1cm.jpg

or here

http://img204.imageshack.us/gal.php?g=onmydesk1cm.jpg

oh and since you cant see the full screen of my monitor, is the 32" lcd tv...

Edited by gdogg
Link to comment
Share on other sites

yah 1GB ddr 2-2-2-6 xp 4000, ddr 500

I got it at 522 2-2-2-5 for now, gonna work it into 2220 when I am done, it boots, but I am scared to use it for now lol

got it in the orange slots, they give better bandwich with my memory

I am getting slightly over 13K in 3dmark05

Edited by gdogg
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...