tomidis Posted November 11, 2009 Share Posted November 11, 2009 bartgrefte, this is from ref.chmDefaultHide Specifies that answers in the answer file are defaults. Unlike UnattendMode = ProvideDefault, Setup does not display the user interface to end users if you specify in the answer file all the answers relating to a particular Setup page. If you specify only subsets of the answers on a page, the page appears with the provided answers. The end user can modify any of the answers on the displayed page.Use UnattendMode = DefaultHide in deployment scenarios where an administrator might want only end users to provide the administrator password on the computer. This behavior is the default if you do not specify unattended mode.FullUnattended Specifies a fully unattended GUI-mode Setup. If you do not specify a required Setup answer in the answer file, Setup generates an error.During an attended Setup, improperly signed hardware drivers generate a warning dialog box. If UnattendMode = FullUnattended, then Setup does not install hardware drivers unless they are properly signed.Use UnattendMode = FullUnattended in deployment scenarios where you require a complete unattended installation.I suggest you to try with UnattendMode = DefaultHideI was also getting some errors with UnattendMode = FullUnattendedYour installation won't stop if you have all answers, no matter if you using FullUnattended or DefaultHide Link to comment Share on other sites More sharing options...
bartgrefte Posted November 11, 2009 Share Posted November 11, 2009 (edited) Trying with that modification now.But how come it worked when I downloaded and integrated all hotfixes separatly?Problem started when I switched to post sp2 updatepack..."Your installation won't stop if you have all answers, no matter if you using FullUnattended or DefaultHide"What do you mean with it won't stop? Stop on error you mean?edit: getting an error (security alert) at T-29:driversoftware not properly signed with authenticode technology.installed inf does not contain digitail signature information.do you wan't to install the driver: yes/no/more info(which doesn't work, nothing appears)I clicked yes, see what happens.At t-22 again, same message. Edited November 11, 2009 by bartgrefte Link to comment Share on other sites More sharing options...
tomidis Posted November 11, 2009 Share Posted November 11, 2009 "Your installation won't stop if you have all answers, no matter if you using FullUnattended or DefaultHide"What do you mean with it won't stop? Stop on error you mean?I was meaning about full unattended mode, if you have all answers in winnt.sif, then installation process don't stop for example at regional settings screen. That's why is the same if you using FullUnattended or DefaultHide, like as I said, I was getting errors with FullUnattended switch. Link to comment Share on other sites More sharing options...
bartgrefte Posted November 11, 2009 Share Posted November 11, 2009 (edited) Okay.Anyway, installation works now , but had to click yes twice for those security alerts, what to do about that?edit: removed NonDriverSigningPolicy = Ignore, now it continues.After installing, hope it goes okay again, see if sigverif can find the troublemakers. Edited November 11, 2009 by bartgrefte Link to comment Share on other sites More sharing options...
tomidis Posted November 11, 2009 Share Posted November 11, 2009 Okay.Anyway, installation works now , but had to click yes twice for those security alerts, what to do about that?Do you have integrated some drivers pack besides 5eraphs updates pack?I don't have that driver signing warningsBut now you know what caused your error @T-13 --> in FullUnattended mode this drivers wasn't installed and that caused error @T-13once again from ref.chmFullUnattended ...During an attended Setup, improperly signed hardware drivers generate a warning dialog box. If UnattendMode = FullUnattended, then Setup does not install hardware drivers unless they are properly signed.now you must discover from where are those unsigned drivers, I doubt they're in 5eraphs update pack because I don't get those errors Link to comment Share on other sites More sharing options...
bartgrefte Posted November 11, 2009 Share Posted November 11, 2009 (edited) See my edit in previous post.I didn't add any drivers. Only post sp2 updatepack, IE8 and WMP11 with Boooggy's slipstreamer for wmp.once again from ref.chmFullUnattended ...During an attended Setup, improperly signed hardware drivers generate a warning dialog box. If UnattendMode = FullUnattended, then Setup does not install hardware drivers unless they are properly signed.now you must discover from where are those unsigned drivers, I doubt they're in 5eraphs update pack because I don't get those errorsYeah I know, but I had the option ignore for that (don't know why) in the winnt.sif.With that other line beneath it, see edit previous post, apparantly didn't work anymore?!edit: installation succesfull, without those alerts. Now running sigverif.Edit2: no unsigned files.... Edited November 11, 2009 by bartgrefte Link to comment Share on other sites More sharing options...
tomidis Posted November 11, 2009 Share Posted November 11, 2009 edit: removed NonDriverSigningPolicy = Ignore, now it continues.I have in my winnt.sif NonDriverSigningPolicy = Ignore and everything is installed without warnings or errors Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now