Vista NIC Problem...

[sidefx]

Just installed Vista and lovin it so far however it doesn't seem to have a driver for my NIC. I have built-in NIC on an Asus A7N8X-E Deluxe which uses the Marvell Yukon Ethernet Controller.

Any suggestions? Plz tell me there's a solution.

[phatcat42141]

Just installed Vista and lovin it so far however it doesn't seem to have a driver for my NIC. I have built-in NIC on an Asus A7N8X-E Deluxe which uses the Marvell Yukon Ethernet Controller.

Any suggestions? Plz tell me there's a solution.

Did you try the drivers disk that came with your computer/motherboard?

I found a link for a Bios and System update for the "Asus A7N8X-E Deluxe" here you go but be sure you know what your doing if it wants you to flash the bios. -- http://www.techspot.com/drivers/index/file/information/2427

[qbase7]

just use the xp drivers, worked for me on most of my hardware

[xaero]

I have the same problem with Abit KV8-MAX3 motherboard. When I use XP driver, I get notification that there was problem with .ini file, some line is missing from the file. Any suggestion?

[fizban2]

@xaero

you can try and edit the ini, not an easy task, o check to see if ABIT has released newer verion on the driver that has been written write.

@sideFX

if the intial driver that came with the motherboard didn't work check out yukons site, they update drivers regulary, there should be a driver there you can use

for both

if you can't find drivers then you are stuck till the companies write them no way around that short of installing a PCI NIC that is supported