Jump to content

98 SE SP 3.32


Gape

Recommended Posts

bug report for 2.1a GERMAN:

- wordpad don't crash anymore one some doc files (like in version 2.x) --> good

- but now the pulldown menu for the font size is empty, but the font size is changeable through the edit field

Link to comment
Share on other sites


Sorry to bother you but when installing 2.1a over the earlier 98SE Service Pack plus a current 98SE2ME, I get a total of 38 file version conflict messages to which I so far have responded to 'keep my existing version'.

Should I change my 'newer' and currently installed files to those included in 2.1a?

My thanks and best regards to Gape, and to MDGx,

Link to comment
Share on other sites

@plop : You should install 98SP before installing 98SE2ME. I believe that those messages are normal due to the fact that many 98SE2ME files are of a superior version than upated 98SE files. Wait for confirmation of that by Gape or MDGx.

Link to comment
Share on other sites

Thanks, eidenk,

Just to clarify, I'm installing the 98SP 2.1a onto the existing, previously installed, 98SP and 98SE2ME upgrades.

Most version conflict files refer to WinME files, version 4.90.3000 etc.; plus hh.exe, hhsetup.dll, etc.; and mouhid.vxd, vip.386.

Link to comment
Share on other sites

I installed your sesp21a-en.exe

And my 2nd windows98 wouln't boot up.

Luckily I have SYSTEM COMMANDER 7.03(SC7)and 3 OS's installed.

I.- 98SE_A admin/CD Burning/Audio editing/NO Network

II.- 98SE_B Internet and Gaming

III.- XP just to stay Modern, LOL

1.-After reboot SC7, recognised it as a DOS system and it wouln't boot from it

2.-I loaded the 98SE_A and noticed that the IO.SYS in my 98SE_B was gone, I had a IO.001,

which i copied "Copy of IO.001" and renamed the IO.001 to IO.SYS, rebooted.

3.- This time SC7, recognised it as a "Windows 98" system, not Windows 98SE But I could finally boot from it.

4.- I copied my 98SE_A's IO.SYS on top of the 98SE_B's IO.SYS, and rebboted.

5.- This time SC7, recognised it as a "Windows 98SE" system, all back to normal. :-)

I hope this helps anyone that might had a similar problem.

And Gape thks a lot to keep Win98 alive. THKS a million.

BTW i can even Play, Tactical Ops, NFS underground 2, Unreal Tournament 2004, thks to You all, and my tweaking of course.

Link to comment
Share on other sites

@plop:

This is a normal situation. Because 982ME installs some newer WinME files. I think keeping newer files is a good idea.

But you can re-install latest 98SE2ME after installing 98SESP to make sure that everything is OK.

mamas6667:

Thanks for the info.

Link to comment
Share on other sites

Just to clarify, I'm installing the 98SP 2.1a onto the existing, previously installed, 98SP and 98SE2ME upgrades.

Most version conflict files refer to WinME files, version 4.90.3000 etc.; plus hh.exe, hhsetup.dll, etc.; and mouhid.vxd, vip.386.

Like Gape said, 98SE2ME installs newer versions of system files from WinME setup CD or even newer WinME hotfixes [patched files].

Please see READ1ST.TXT for details [the "FAQ" chapter, where it starts with: "* 98SE2ME does NOT interfere with Gape's Windows 98 SE Service Pack 2 (SP2):"]:

http://www.mdgx.com/9s2m/READ1ST.TXT

Full list of files replaced by 98SE2ME is here:

http://www.mdgx.com/98-5.htm#FME

If you installed HH.EXE, HHSETUP.DLL, HHCTRL.OCX, ITIRCL.DLL + ITSS.DLL from my older unofficial HHUPD.EXE update [which I have recently replaced with newer files update], and then if you try to install the official one from:

http://www.mdgx.com/add.htm#HHU

the newer files will not be overwritten, and you may have to replace them yourself by hand.

They go to:

- %windir% [usually C:\WINDOWS]:

HH.EXE

- %windir%\SYSTEM [usually C:\WINDOWS\SYSTEM]:

HHSETUP.DLL

HHCTRL.OCX

ITIRCL.DLL

ITSS.DLL

If this is the case, make sure you register them properly [after you copy them to proper directories = see above] by running this batch file:

ECHO OFF
%windir%\SYSTEM\REGSVR32 /S %windir%\SYSTEM\HHCTRL.OCX
%windir%\SYSTEM\REGSVR32 /S %windir%\SYSTEM\ITSS.DLL
%windir%\SYSTEM\REGSVR32 /S %windir%\SYSTEM\ITIRCL.DLL
EXIT

MOUHID.VXD is not replaced [nor installed] by 98SE2ME.

Newer VIP.386 [build 4.10.2227] is installed by 98SE2ME options 1 + 2.

VIP.386 4.10.2227 is also installed by Maximus-Decim's NUSB:

http://www.msfn.org/board/?showtopic=43605

Hope this helps.

Edited by MDGx
Link to comment
Share on other sites

MOUHID.VXD is not replaced [nor installed] by 98SE2ME.

Newer VIP.386 [build 4.10.2227] is installed by 98SE2ME options 1 + 2.

VIP.386 4.10.2227 is also installed by Maximus-Decim's NUSB:

http://www.msfn.org/board/?showtopic=43605

MOUHID.VXD - this was the problem of improper version number 4.10.2223.0 (in Intellipoint 4.12) instead of 4.10.0.2223 (in Q254660) stored in the file. These files are otherwise identical, just version 4.10.0.2223 is correct.

NUSB22 does not contain VIP.386 file.

Do you know what is the origin of this 4.10.2227 version? You wrote in http://www.mdgx.com/9s2m/READ1ST.TXT "patched Win98 SE VIP.386 4.10.2227 modded by Maximus-Decim" but the file has too many differences to be just modded - at least in my opinion.

Petr

Link to comment
Share on other sites

NUSB22 does not contain VIP.386 file.

Do you know what is the origin of this 4.10.2227 version? You wrote in http://www.mdgx.com/9s2m/READ1ST.TXT "patched Win98 SE VIP.386 4.10.2227 modded by Maximus-Decim" but the file has too many differences to be just modded - at least in my opinion.

Petr

My bad, VIP.386 4.10.2227 is actually installed by Maximus-Decim's Cumulative Update:

http://www.msfn.org/board/?showtopic=50611

not by NUSB.

I have no idea where he got that file, I couldn't find any reference to it at Microsoft web site, so I assumed he [or someone else] modded the older VIP.386 4.10.2226 from Q259728. [?]

Edited by MDGx
Link to comment
Share on other sites

I have no idea where he got that file, I couldn't find any reference to it at Microsoft web site, so I assumed he [or someone else] modded the older VIP.386 4.10.2226 from Q259728. [?]

If you binary compare them, version 4.10.2227 is so different to 4.10.2226 (and 4.10.2224) that it does not look like simple modding. What versions exist?

Q238329 3.8.1999 14:50 4.10.2223

Q238453 23.9.1999 11:39 4.10.2224

Q242962 1.10.1999 17:38 4.10.2225

Q259728 10.5.2000 13:20 4.10.2226

Q?????? 9.8.2000 15:27 4.10.2227

Q329128 1.8.2002 12:27 4.10.2228 (not available)

So it looks like 4.10.2227 COULD be original file from Microsoft.

Petr

Edited by Petr
Link to comment
Share on other sites

the pulldown menu for the font size is empty, but the font size is changeable through the edit field

anybody else, who can confim this? This issue does not seem to appear here

did you comply with the install guide?

no... simply over sp2.1. Route : SP 1.6, sp16.2 ..., sp2.0 , sp2.1, sp2.1a ;)

Link to comment
Share on other sites

dsound.dll (again)

installing the SP2.1a after DirectX9c (as recommended) with the following line

DSOUND.DLL,,DSOUND.TMP,4

in the update.inf, makes the SP overwrite the new dsound.dll (4.09) from DirectX9c with the old one (4.07) from the SP :(

DxDiag also recognizes the deprecated file and recommends the reinstallation of DirectX9c

Is there an alternative installation method?

maybe another number than ",4"

Edited by swgreed
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...