web7my Posted November 5, 2005 Share Posted November 5, 2005 I'm using win XP. I installed 2 nic card. The first one is connecting to adsl modem (for internet). I using the second nic to connect to Access Point. Can someone please help me , how to configure both nics card. I attend to use second nic for AP. thanks. Link to comment Share on other sites More sharing options...
chilifrei64 Posted November 6, 2005 Share Posted November 6, 2005 without knowing what your configuration is.. under most cases this is the probem.. you probably have a default gateway configured on both nic's... remove the default gateway from the lan nic and leave the default gateway on the nic that is connected to the ADSL router Link to comment Share on other sites More sharing options...
eyeball Posted November 6, 2005 Share Posted November 6, 2005 hey dude! i think i know what you might be trying to do give this a go....in the properties of both cards..card 1 - automatically an ip automatically and same with dns(WAP = Wireless Access Point)ok assuming your WAP has an ip of 192.168.1.1 and its default gateway is set to 192.168. 1.2 setup ard 2 as followscard 2 ip address - 192.168.1.2 subnet mask - 255.255.255.0default gateway - emptydns - emptynow if you highlight both cards and select "bridge connections" you might be able to connect wirelessly to the WAP and get to the internet....try it and let us know what happens thanks Link to comment Share on other sites More sharing options...
web7my Posted November 7, 2005 Author Share Posted November 7, 2005 Thanks eyeball... but still cannot ..So let me give you detailOS - win XP sp11st Nic Card (Connect to ADSL Modem -not router artnet)my setting : IP 192.168.0.2default gateway : 192.168.0.1dns : 202.188.0.133 - given by ISP2nd Nic Card (conect to Acess Point - for wireless networking with other PCIP 192.168.0.3default gateway :dns:Modem - Artnet ( default ip 192.168.0.1)Access Point : D-link 2000+I am not very good in IT knownledge. Please help me. Link to comment Share on other sites More sharing options...
jaclaz Posted November 7, 2005 Share Posted November 7, 2005 Go to this site:WOWNhttp://www.wown.com/http://www.windowsnetworking.com/You can find there all the info you need, including step by step guides.jaclaz Link to comment Share on other sites More sharing options...
syedali Posted November 7, 2005 Share Posted November 7, 2005 If u have 2 nic, in my network places u can see 2 networks ..Select both networks & right click then u will get an option to bridgeafter that u will get one more network in tha my network places1st Local Area ConnectionTake the property there is an option to give DNSOnly DNS And ADNS 202.188.0.133202.188.0.135 (this is defualt ISP)2nd Local Area Connection2Take the property there is an option to give ipOnly IP Address and Subnet mask192.168.0.2255.255.255.0Then Bridge this two LAC.Right click Bridge it.Take the property there is an option to give ip and DNSNetwork bridge ip192.168.1.48255.255.255.0192.168.1.1202.188.0.133202.188.0.135Then go to other pc give an ip (192.168.0.3)then set the gateway as 192.168.0.2 (in the second pc )OR some time support only DNS without ip and without gateway.use cross cablestested .. Link to comment Share on other sites More sharing options...
web7my Posted November 7, 2005 Author Share Posted November 7, 2005 thanks .. newbieI 'll try it first. I'll let U know the result. Link to comment Share on other sites More sharing options...
web7my Posted November 7, 2005 Author Share Posted November 7, 2005 I try as you suggested. I try to ping this PC using other PC through wireless but 'the host is broken'. I dont know why... but i can ping my acess point (wireless l-sys 2000+ 192.168.0.50). How can I use the wireless networking. Link to comment Share on other sites More sharing options...
web7my Posted November 8, 2005 Author Share Posted November 8, 2005 hey dude! i think i know what you might be trying to do give this a go....in the properties of both cards..card 1 - automatically an ip automatically and same with dns(WAP = Wireless Access Point)ok assuming your WAP has an ip of 192.168.1.1 and its default gateway is set to 192.168. 1.2 setup ard 2 as followscard 2 ip address - 192.168.1.2 subnet mask - 255.255.255.0default gateway - emptydns - emptynow if you highlight both cards and select "bridge connections" you might be able to connect wirelessly to the WAP and get to the internet....try it and let us know what happens thanksI try that one but other PC cannnot access my access point Link to comment Share on other sites More sharing options...
compass Posted November 8, 2005 Share Posted November 8, 2005 If u have 2 nic, in my network places u can see 2 networks ..Select both networks & right click then u will get an option to bridgeafter that u will get one more network in tha my network places1st Local Area ConnectionTake the property there is an option to give DNSOnly DNS And ADNS 202.188.0.133202.188.0.135 (this is defualt ISP)2nd Local Area Connection2Take the property there is an option to give ipOnly IP Address and Subnet mask192.168.0.2255.255.255.0Then Bridge this two LAC.Right click Bridge it.Take the property there is an option to give ip and DNSNetwork bridge ip192.168.1.48255.255.255.0192.168.1.1202.188.0.133202.188.0.135Then go to other pc give an ip (192.168.0.3)then set the gateway as 192.168.0.2 (in the second pc )OR some time support only DNS without ip and without gateway.use cross cablestested ..ali he is telling about 2 nic not three ...... Link to comment Share on other sites More sharing options...
web7my Posted November 9, 2005 Author Share Posted November 9, 2005 If u have 2 nic, in my network places u can see 2 networks ..Select both networks & right click then u will get an option to bridgeafter that u will get one more network in tha my network places1st Local Area ConnectionTake the property there is an option to give DNSOnly DNS And ADNS 202.188.0.133202.188.0.135 (this is defualt ISP)2nd Local Area Connection2Take the property there is an option to give ipOnly IP Address and Subnet mask192.168.0.2255.255.255.0Then Bridge this two LAC.Right click Bridge it.Take the property there is an option to give ip and DNSNetwork bridge ip192.168.1.48255.255.255.0192.168.1.1202.188.0.133202.188.0.135Then go to other pc give an ip (192.168.0.3)then set the gateway as 192.168.0.2 (in the second pc )OR some time support only DNS without ip and without gateway.use cross cablestested ..ali he is telling about 2 nic not three ......I have try that one... still cannot access my internet throught AP. Still nedd suggestion. Help me... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now