FAQ | nForce drivers : which one? Can I use all of them?

[kal]

Hi ppl,

I would like to make my own unattended CD and integrate a lote of drivers. As you know, nvidia place at our disposal different nForce drivers pack : nForce 4 AMD / nForce 4 Intel / nForce 1,2,3

I wish to integrate all these drivers. Is it possible ? nForce 3 Mainboard will choose the correct audio/Lan/SATA drivers or there's a chance of mistake (choosing the drivers from nForce 4 drivers pack) ? And vice-versa ?

Thank you for your help

Kal

Edited November 6, 2005 by Bâshrat the Sneaky

[Bâshrat the Sneaky]

I'd suggest you use my DriverPacks in that case. Or you could puzzle them together yourself. If you want to do it yourself, you'll have to start reading all .inf files to see which driver supports which devices. At the same time you'll have to keep an eye on the version numbers. Good luck .

[kal]

Thank you BST

But I have to include all you drivers pack or only the chipset driver pack ?

If I want the SATA drivers, Audio Drivers, Lan drivers which it's include in nForce drivers, i have to slipstream all the drivers pack ?

Kal

[Bâshrat the Sneaky]

Only use the ones that you want to use, of course!

[kal]

All right, that's what i'm doind and i'm currently slipstreaming your driver pack with method 2 B)

By the way, can i apply the nlite method after the slipstream or should I use it before the slipstream ?

Or should I forget nLite and use my own winnt.sif / RegTweaks.reg ?

EDIT: Sorry, i found the answer in the FAQ

Thank you for your work BST

Edited November 6, 2005 by kal

[Bâshrat the Sneaky]

It's BTS