kurt476 Posted August 9, 2005 Share Posted August 9, 2005 (edited) problem 1:The Parallel port driver service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.problem 2:AMLI: ACPI BIOS is attempting to read from an illegal IO port address (0x4d0), which lies in the 0x4d0 - 0x4d1 protected address range. This could lead to system instability. Please contact your system vendor for technical assistanceok i don't use parallel port.2 i never use ACPI.please help me solve these both thanx. Edited August 9, 2005 by kurt476 Link to comment Share on other sites More sharing options...
ripken204 Posted August 10, 2005 Share Posted August 10, 2005 so whats the problem if u dont use them? look in the device manager to make sure that they are enabled tho. Link to comment Share on other sites More sharing options...
ripken204 Posted August 10, 2005 Share Posted August 10, 2005 so whats the problem if u dont use them? look in the device manager to make sure that they are enabled tho. Link to comment Share on other sites More sharing options...
kurt476 Posted August 10, 2005 Author Share Posted August 10, 2005 (edited) so whats the problem if u dont use them? look in the device manager to make sure that they are enabled tho.i want too disable them and the parallel port isn't showing in device manager, i want too disable ACPI i don't use either. the acpi i need some way off disabling that. do you know away of doing these?P.S. don't repeat your self more then once on this forum. thank you for not repeating this again. Edited August 10, 2005 by kurt476 Link to comment Share on other sites More sharing options...
Rayza Posted August 10, 2005 Share Posted August 10, 2005 Is this a new installation or an old existing one with a new problem? Have you checked your BIOS to disable any uneeded settings there? Link to comment Share on other sites More sharing options...
kurt476 Posted August 11, 2005 Author Share Posted August 11, 2005 Is this a new installation or an old existing one with a new problem? Have you checked your BIOS to disable any uneeded settings there?yes i did disable uneeded settings in the bios. this is a new installation. Link to comment Share on other sites More sharing options...
ripken204 Posted August 11, 2005 Share Posted August 11, 2005 u can disable the parallel port, its the same as the printer port right? just go into the device manager and open up ports Link to comment Share on other sites More sharing options...
ChunkDog Posted August 11, 2005 Share Posted August 11, 2005 What motherboard is it?Did you disable the parallel port in the BIOS?Did you Disable ACPI settings in the BIOS?Have you checked to see if you need to update (Flash) the BIOS? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now