Jaque Posted August 22, 2005 Share Posted August 22, 2005 http://www.8ung.at/ramdisk/RAMDisk/RAMDisk_Free.htmIs a dead link.<{POST_SNAPBACK}>FYI I just copied the original manual, but if I am not mistaken this is the new correct link http://users.compaqnet.be/cn181612/RAMDisk/ramdiskfree.htmBut remember you better use the ramdrv.sys driver from Bart PE v3.0.32/v3.1.3 or the updated Microsoft ramdrv.sys from the WSSRA deployment kit. Link to comment Share on other sites More sharing options...
jaclaz Posted August 23, 2005 Share Posted August 23, 2005 http://www.8ung.at/ramdisk/RAMDisk/RAMDisk_Free.htmIs a dead link.<{POST_SNAPBACK}>Theis is another working one:http://members.fortunecity.com/qualitysoft...isk/RAMDisk.htmjaclaz Link to comment Share on other sites More sharing options...
ChrisBaksa Posted August 24, 2005 Share Posted August 24, 2005 http://www.8ung.at/ramdisk/RAMDisk/RAMDisk_Free.htmIs a dead link.<{POST_SNAPBACK}>FYI I just copied the original manual, but if I am not mistaken this is the new correct link http://users.compaqnet.be/cn181612/RAMDisk/ramdiskfree.htmBut remember you better use the ramdrv.sys driver from Bart PE v3.0.32/v3.1.3 or the updated Microsoft ramdrv.sys from the WSSRA deployment kit.<{POST_SNAPBACK}>I was not going to use it.. Just wanted to take a look at it.Thisis not supported my Microsoft. Neither is Barts.Pure PE here.Chris Link to comment Share on other sites More sharing options...
mats Posted August 30, 2005 Share Posted August 30, 2005 I took a look at the driver int the WSSRA deployment kit and that driver is ok. However the included inf files shouldn't be used. They are way to old to work with pe2005. They also made a type in the WinPESys.inf file.To get it working:1. copy the ramdrive file from the WSSRA kit to \system32\drivers2. run reg exe load HKLM\PETEMP \system32\setupreg.hiv3. run the attached ramdrv.reg4. run reg exe unload HKLM\PETEMP5. make a new iso with oscdimg6. boot it and you should hav a ramdrive at r:ramdrv.reg Link to comment Share on other sites More sharing options...
JuMz Posted August 30, 2005 Share Posted August 30, 2005 could you perhaps post a link to the ramdrive file OR email/pm me... Link to comment Share on other sites More sharing options...
mats Posted August 31, 2005 Share Posted August 31, 2005 Ofcource It is on page three in this thread but here it is againhttp://www.microsoft.com/downloads/details...&displaylang=en.You will need to download and extract this kit to for example C:\WSSRA. Inside there is a file WSSRA_Deployment_Toolkit.msi. Run this and install to C:\WSSRA.After that you will have a C:\WSSRA\Deployment Kit\MSAAPFTree\WinPESupport folder and in that you have ramdrv.sys Link to comment Share on other sites More sharing options...
patters Posted December 6, 2005 Share Posted December 6, 2005 (edited) No 64bit compile then I need to run WinPE X64 to unattended install the 64Bit OSes. Edited December 6, 2005 by patters Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now