hsu22 Posted July 13, 2005 Share Posted July 13, 2005 what did u do?just beeing curious.....<{POST_SNAPBACK}>Use your reg file replace mine Link to comment Share on other sites More sharing options...
boooggy Posted July 13, 2005 Share Posted July 13, 2005 ****..... that i didn't think off..... Link to comment Share on other sites More sharing options...
at0msk Posted July 14, 2005 Share Posted July 14, 2005 I use it this way;1 windows xp pro2 use nLite to a slip sp2 b integrate Ryans pack full 1.2.2 c integrate xpize 1.2 d ect.3 wmp slipstreamer4 Ryans new update to 1.2.2 (5mb)BD1. Do all the nLite stuff (leaving WMP in-tact), integrate ryan's pack and 1.2.2b update, etc.2. Run WMP10 slipstreamer v3.3. Extract your WMP10 update pack into i386 and overwrite all.4. Make ISO and burn.5. After installation run your WMP10 mod.And I will have a fully up-to-date WMP10 with windows media video hardware acceleration?I think what's best to do is slip sp2 with nlite and then close out nlite.Then open nlite and only integrate the 1.2.2 hotfix pack.Then extract 1.2.2b pack to i386 and overwrite all.Then open up nlite and do everything else and make the ISO. From Reading this board and Ryan's; I understand, I need to slimstream the hotfixes and WMP10 in a certain order to make everything work correctly. I'm not quite sure if what I have listed in red in the proper order: 1.Open NLite to: a.copy 'XPCD' to harddrive b.Slipstream SP2 then close NLite.2.re-open NLite to: a.Intergrate Drivers* b.Remove componets* (WMP9 MUST NOT BE REMOVED) c.Unattended Setup* d.Patches* e.Tweaks* then Close NLite again. f.Integrate Ryan's pack full 1.2.23.Run WMP10 Slimpstreamer V34.Extract 'newWMP.rar' to the 'i386' folder, overwriting all when prompted5.Extract Ryan's pack '1.2.2 to 1.2.2b' (or would it be the No-WMP 1.2.2b) to 'i386' folder, overwriting all all when prompted.6.Finally Make ISO and Burn========================================================(*)optional steps-----------------------------------------------------------------------------------------------------Also, Since Slipstreaming WMP10, would I need to download Ryan's 1.2.2b update with or without the WMP9 updates? My understanding I would not need any of the WMP 9 updates; since I am installing version 10.Any Help would appreciated.Thanks Link to comment Share on other sites More sharing options...
boooggy Posted July 14, 2005 Share Posted July 14, 2005 i do it this way copy xpcd to hard drive. open nlite and slipstream sp2 then xpize plus RyanVM's pack. then close nlite and add 1.2.2b with everything in it. then open nlite remove what i want except wmp9 and wmp6.4 (very important), and unnatended and reg tweaks. then just before making the iso i leave nlite open and run wmp10 slipstreamer. add my pack and reg entries. after this make iso and try it first time to virtual machine. then burn it to a cd-rw and install on my real machine..... Link to comment Share on other sites More sharing options...
OrcoXP Posted July 14, 2005 Share Posted July 14, 2005 Do the 122b pack before XPize...there are about 3 files that the 122b pack would reset on you. Link to comment Share on other sites More sharing options...
at0msk Posted July 14, 2005 Share Posted July 14, 2005 (edited) Thanks for clearing that up. I'll now make my iso and test it, but I want to know which is easier/faster to test in: vmware or virtual PC.Oh, which 1.2.2b to use one with or without WMP updates? Edited July 14, 2005 by at0msk Link to comment Share on other sites More sharing options...
boooggy Posted July 14, 2005 Share Posted July 14, 2005 it doesn't matter. cause slipstreamer updates to wmp10 anyway..... Link to comment Share on other sites More sharing options...
OrcoXP Posted July 14, 2005 Share Posted July 14, 2005 Just use the normal one...it just changes how much qfecheck complains about the updates...but if you are using XPize then you have voided that anyway. Link to comment Share on other sites More sharing options...
at0msk Posted July 15, 2005 Share Posted July 15, 2005 @boogy, um... where do you add your registry entries? Link to comment Share on other sites More sharing options...
boooggy Posted July 15, 2005 Share Posted July 15, 2005 hivedef.inf file. but read in this topic after my posts. Link to comment Share on other sites More sharing options...
Cybertronic Posted July 20, 2005 Share Posted July 20, 2005 Sorry for bumping this topic , do these updates solve the WMP toolbar problem? Link to comment Share on other sites More sharing options...
Cybertronic Posted July 22, 2005 Share Posted July 22, 2005 Anyone? Link to comment Share on other sites More sharing options...
troscat Posted July 22, 2005 Share Posted July 22, 2005 Hi! I need help.I'm getting a fatal error message, saying "Error: Couldn't read section entry. Please report the bug.", when trying to use ver.3 WMP10 Slipstreamer. I have an English XP SP2 source updated with RyanVM v 1.2.2 and 1.2.2b update packs using nLite v1.04.I did not remove WMP9 and WMP6.4 during nLite tweaking. I got the error during WMP10 slipstreaming prior to making the ISO in nLite.Pls help! Link to comment Share on other sites More sharing options...
boooggy Posted July 25, 2005 Share Posted July 25, 2005 (edited) @troscattry to redo the xpcd again using nlite 1.05b. also redownload slipstreamer again. or wait for RyanVM's pack 1.3.0..............@Cybertronicwhat is that toolbar problem? Edited July 25, 2005 by boooggy Link to comment Share on other sites More sharing options...
Cybertronic Posted July 25, 2005 Share Posted July 25, 2005 It's called Mini-mode, where you right-click on an empty area of the taskbar, point to Toolbars, and then select WMP The problem is that WMP is not in the list Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now