valter Posted May 8, 2005 Share Posted May 8, 2005 Maybe you want to check this ... http://support.microsoft.com/default.aspx?...kb;en-us;898060 Link to comment Share on other sites More sharing options...
bertovic Posted May 9, 2005 Author Share Posted May 9, 2005 Hi,klasika,Thanks for the inforation I'll check it. This week I'll be in contact with Microsoft, I have opened a case and I hope that problem can be solved. I'll let you know the solution (if any) ;-)thanks. Link to comment Share on other sites More sharing options...
Skywalker Posted May 9, 2005 Share Posted May 9, 2005 Can this be you're problem?Announcement - UPDATED HOTFIX FOR MICROSOFT KNOWLEDGE BASE ARTICLE 898060 RELEASEDThis Alert is to notify you of the availability of an updated hotfix for Microsoft Knowledge Base article 898060 and provide information around this updated hotfix.The alert is also to provide you with information and answers to a number of questions that have been raised since the publication of the Knowledge Base article on 23 April 2005.As a reminder, the Knowledge Base Article can be found here:http://support.microsoft.com/kb/898060The Master Knowledge Base Article for MS05-019 references this article.The Master Knowledge Base Article for MS05-019 is located here:http://support.microsoft.com/kb/893066SYMPTOMSNetwork connectivity between clients and servers may fail. This failure occurs after the installation of either security update MS05-019 or Microsoft Windows Server 2003 Service Pack 1 (SP1). Any one or more of the following symptoms may occur:Ok I see I'm not the first with this suggestion....... Link to comment Share on other sites More sharing options...
pikjapik Posted May 17, 2005 Share Posted May 17, 2005 i hav same problem with you Link to comment Share on other sites More sharing options...
bertovic Posted May 20, 2005 Author Share Posted May 20, 2005 Ok,Now I am working with Microsoft. When solved I'll post the solution to this strange problem. thanks. Link to comment Share on other sites More sharing options...
pikjapik Posted May 20, 2005 Share Posted May 20, 2005 thank you thank you Link to comment Share on other sites More sharing options...
tarquel Posted May 21, 2005 Share Posted May 21, 2005 er....did i miss something?What was the solution?hehe Cheers and congrats Regards,N. Link to comment Share on other sites More sharing options...
bertovic Posted May 24, 2005 Author Share Posted May 24, 2005 Hi,no, no, I don't have the solution for the moment. Still working with Microsoft, it seems that the MS technician is taking his time.... Link to comment Share on other sites More sharing options...
bertovic Posted May 26, 2005 Author Share Posted May 26, 2005 Hi,I need to know ho has the same problem.pikjapik, you have the same problem ?in that case, have you a BroadCom 57xx NIC ?thanks. Link to comment Share on other sites More sharing options...
eplrs Posted May 26, 2005 Share Posted May 26, 2005 check the configuration of the network cardpower management make sure the box that says allow the computer to turn of this device is not checked Link to comment Share on other sites More sharing options...
pikjapik Posted June 1, 2005 Share Posted June 1, 2005 Yes Broadcom 5704I think that's not Microsoft problem but now i not sure what cause make this problem. but i had "restore factory setting" on Ethernet switch module and reconfig it again. The problem never come back. I had test for 4 blade center ,reset and reconfig 8 Ethernet switch module. Try to do like this and tell me it can solve or not ...... Link to comment Share on other sites More sharing options...
bertovic Posted June 1, 2005 Author Share Posted June 1, 2005 Hi,eplrs,I tried that option (power management) when the problem started, it was one of the first things I did and didn't work.pikjapik,So, you have an IBM BladeCenter model 86772xx with Swith Module part number 26K6483 and IBM Blade Servers model HS20 (machine type 8843) and you solved the problem resetting the Switch Modules to factory defaults ??? (plase confirm you have same hardware)One more thing, please, tell me which firmware version you have installed on Switch Modules.thanks in advance.Albert.- Link to comment Share on other sites More sharing options...
bertovic Posted June 6, 2005 Author Share Posted June 6, 2005 Hi pikjapik,So, you have an IBM BladeCenter model 86772xx with Swith Module part number 26K6483 and IBM Blade Servers model HS20 (machine type 8843) and you solved the problem resetting the Switch Modules to factory defaults ??? (plase confirm you have same hardware)One more thing, please, tell me which firmware version you have installed on Switch Modules.thanks in advance. Link to comment Share on other sites More sharing options...
pikjapik Posted June 15, 2005 Share Posted June 15, 2005 same blade model type with you but not sure what ESM model but it's ibm ESM firmware 0.95 Link to comment Share on other sites More sharing options...
ollie34 Posted July 5, 2005 Share Posted July 5, 2005 Did anyone find a solution for this problem? – I’m experiencing the exact same problem on this type of BladeCenter / blade servers.We have got five HS20 (8843-21Y) blades in one BladeCenter (8677-3TG), and randomly either of the blades looses connection to the network.I don't know what type of ESM modules that are installed, but they appear as DLNK (revision 95 - released 08/20/2004) in MM web. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now