Jump to content

Maximus-Decim Native USB Drivers


Recommended Posts

This message is for sunamigaza.

After downloading the attachment TwinMos.ZIP and try to open it with WinZip, following error message comes up: "Cannot open file: it does not apear to be a valid archive."

Is the file corrupted?

Thx a lot.

Link to comment
Share on other sites


This message to Wijono & Shaddam:

"The total filespace required to upload all the attached files is greater than your per post or global limit. Please reduce the number of attachments or the size of the attachments." comes from MSFN.ORG :(

That's the probem when tried to upload the files, pls direct email me.

Link to comment
Share on other sites

Hi Maximus,

That is a master-piece!!

Just would like to feedback to you, that it should be allowed to unplug the USB drive after right-click the drive in Windows Explorer and in the drop-down menu then click Eject. When we do that, your driver will come up with "Unsafe Removal of Device" popup. Would be great if this can be corrected.

Thanks to sunamigaza for the SUBSTOR.INF.

Unfortunately there is no reply from Maximus regarding the possibility of using "Eject" as described in my message above.

Has someone else any idea?

Link to comment
Share on other sites

  • 2 weeks later...

Dear Maximus

When i install 98se sp2.2 and then install USB2.2 AND then 98se2me the pen drive is not working after installing 98se2me.

i have to reinstall it again with USB2.2 what is the best sequence to install it.

thanks u.

best of luck 4 u'r mission.

Link to comment
Share on other sites

Sorry i got it

Installation Guide

Prerequites:

- Windows 98 SE English (4.10.2222A).

- 32 MB of RAM minimum.

- At least 40 MB free hard disk space.

Installation order:

*1- Install Windows 98 SE (with or without 98lite).

*2- Install IE 6.0 SP1.

3- Install all newest drivers of your hardware.

*4- Install DirectX (9.0c).

*5- Install MS Office.

*6- Install/Use 98lite to remove any features.

7- Close ALL open programs.

8- Install latest SE SP.

*9- Install critical updates from WindowsUpdate.

*10- Install MDGx's latest 98SE2ME.

========================///

*11- Install Maximum-Decim's latest Native USB Drivers.///

====================================

*12- Install Tihiy's latest Revolutions Pack.

13- Update or re-install drivers of your hardware, if you have any problem.

Link to comment
Share on other sites

Anytime, Wijono.

AFAIK, on Windows 98SE using drivers from USB Disk vendors:

- when running Windows Explorer or double-clicking My Computer there'll be an

icon "Removable Disk" then right-clicking it will open pop-down menu which

lists i.e. "Eject" to remove USB Disk. (CMIIW)

- the eject icon (if) appears mostly only once on the System Tray when plug-in

USB Disk for the first time (CMIIW), if the USB Disk removed that icon gone.

If replug-in USB Disk that icon won't re-appear (however, the USB Disk still

working and have to use "Windows Explorer...Eject..." steps to remove USB

Disk) unless re-booting.

Since NUSB22 from M.Decim uses some of WinMe files:

- the above function of "Eject" is replaced by the icon "Unplug or eject

hardware" on the System Tray to remove USB Disk.

Therefore the above steps (Windows Explorer...Eject...) seems inapplicable

coz a pop-up menu will give a warning "Unsafe removal..." and suggesting to

use the icon "Unplug or eject hardware" on the System Tray instead.

- and that icon always appears each time re-plug USB Disk, no need rebooting.

[Win Me/XP style. :) Dunno of Win2k, any1 knows pls info]

PS: add 3 new lines in USBSTOR.INF, pls have a look into Readme.txt in the

revised Readme.zip

Hope this might help.

Readme.ZIP

Link to comment
Share on other sites

Hi

Recently i bought a camera: Sony Cyber-Shot 3.2 Mega Pixels DSC-P32.

With Windows XP, the camera was recognize, but on Windows 98 was not recognized.

So i tried to install Maximus Decim Native USB ver.2.2.

But nothing changed, The same message appear, "searching for a driver"

post-51485-1126565560_thumb.png

I would like to know if it's possible Win98 recognize the camera like WinXP.

Just a curiosity; Is it necessary to have SYSTRAY.EXE file in windows\system?

:hello::hello:

Link to comment
Share on other sites

Hi folks...

I have two USB 2.0 devices: an ADS enclosure (housing a DVD drive) and a Maxtor One Touch II. The problem is that they can not seem to co-exist in Win98SE. Tech support for ADS suggested that both devices may be trying to access the same driver, causing my system to hang.

Would the Maximus Decim Native USB ver.2.2 solve this conflict? Any other work around?

Thanks... :)

Link to comment
Share on other sites

  • 2 weeks later...

Native USB (NUSB) 2.2.1 update

*********************************************************************

Only .INF file!!!

Use only after installation of the NUSB 2.2 !

For installation copy the file USBSTOR.INF in the hidden

catalogue WINDOWS\INF\ with replacement of an old file.

What's new:

* Added very many new devices.

http://rapidshare.de/files/6032283/nusb221e_upd.zip.html

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...