Jump to content

Maximus Decim Native USB ver.2.0


Recommended Posts

Maximus Decim Native USB ver.2.1

------------------------------------------------------------------------

Only for Windows 98SE English !!!

Native (without installation of additional drivers

for each type) support USB flash drives, digital

photo and videocameras and other similar devices.

Remember! You install it at own risk!

Before installation remove ALL of driver

USB flash drivs, available in system.

What's new?

1.Many new devices are added.

2.The low filter usbu2a.sys for work usbstor.sys with some models "tiny" is added.

------------------------------------------------------------------------

http://rapidshare.de/files/1127361/nusb21e.exe.html

Link to comment
Share on other sites


Is it safe (or wise?) to install specific USB drivers after the generic ones are installed?
If you are referring to the ones installed by 98SE2ME into %windir%\SYSTEM32\DRIVERS , it should be safe.

Notice that Maximus Decim drivers now install USBMPHLP.PDR, USBAUTH.SYS + USBNTMAP.SYS files from WinME.

If u plan to install both, please do it in this order:

1. Native USB Drivers

2. 98SE2ME

because 98SE2ME overwrites some of these files with WinME versions.

These are the files installed by 98SE2ME into %windir%\SYSTEM32\DRIVERS from WinME Setup CD:

1394BUS.SYS

DBCLASS.SYS

DBFILTER.SYS

DRMK.SYS

HIDCLASS.SYS

HIDPARSE.SYS

HIDVKD.SYS

MSPQM.SYS

NTMAP.SYS

OPENHCI.SYS

PORTCLS.SYS

REDBOOK.SYS

SBEMUL.SYS

SBP2PORT.SYS

SBP2SCAN.SYS

SWMIDI.SYS

TDI.SYS

UHCD.SYS

UPDATE.SYS

USBAUTH.SYS

USBCCGP.SYS

USBD.SYS

USBHUB.SYS

USB8023.SYS

USBCAMD.SYS

USBCAMD2.SYS

USBINTEL.SYS

USBNTMAP.SYS

USBPRINT.SYS

USBSCAN.SYS

USBSER.SYS

USBSTOR.SYS

WDMFS.SYS

WMIDRV.SYS

WMILIB.SYS

and these WinME hotfixes from MS web site [newer than the ones from WinME CD]:

KMIXER.SYS

OHCI1394.SYS

RT.SYS

USBAUDIO.SYS

Also, if u want/need to install proprietary/3rd party drivers specific only to a particular device, make sure you do that only after u install (1) Maximus Decim Native USB AND (2) 98SE2ME.

PS: I've noticed that the USBMPHLP.PDR file used by Maximus Decim is slightly different [when compared in a hex editor] than the 1 from WinME setup CD [English US anyway]. He probably "modded" it to make it work with Native USB 2.0.

So if u install Maximus Decim USB 2.0 first and then 98SE2ME, make a backup of USBMPHLP.PDR [found in %windir%\SYSTEM\IOSUBSYS], and then put it back into %windir%\SYSTEM\IOSUBSYS after u finish installing both.

Hope this helps.

Link to comment
Share on other sites

What would be the problem with using nusb21 on non-english versions of Windows 98 SE ?

it contains some language specific exe, dll and hlp files:

USER.EXE,SYSTRAY.EXE,QFECHECK.EXE,HOTPLUG.DLL,ADVPACK.DLL,HARDWARE.HLP,QFECHECK.HLP

and of course all of 'em are having the last file versions.

that means if U'll install uSP2.x(Your language version) and NUSB2.x in order below, U'll have a good results:

1. NUSB2.x English

2. uSP2.x Your language version (it will prompt to replace the English files with the same ones in Your language version)

Any other case: store mentioned files before install NUSB and restore 'em later.

Be sure Your stored files have the same (or later) versions.

Link to comment
Share on other sites

:hello: i couldnt get badtoys 3d a old 1996 game to work with joypad then i installed this usb2.0 and it worked amazing. so i cant say u dont need it and sp2.03 is enuff but i like it all the merrier.. 98se 4ever .chow
Link to comment
Share on other sites

Maximus Decim Native USB ver.2.1

------------------------------------------------------------------------

Before installation remove ALL of driver USB flash drives, available in system.

what happens if I don't remove all drivers (if I forget one, etc)??

Link to comment
Share on other sites

what happens if I don't remove all drivers (if I forget one, etc)??

in some cases U can get a BSOD,

it is highly recommended if U have installed prior version of NUSB (1.0-1.3),

and, of course, few drivers intended for same device, can conflict among themselves

Link to comment
Share on other sites

Am setting up new Hdd, would I install USB 2.0 right after install of 98se, before install of Mobo drivers, or Mobo drivers first[see sig for specs] TIAFAI

1. install USB2.0 support for Your PC

2. install NUSB2.1 drivers

if it will be not working, in this case try to install Your original Mobo drivers

Link to comment
Share on other sites

  • 2 weeks later...

Maximus Decim Native USB ver.2.2

------------------------------------------------------------------------

Only for Windows 98SE English !!!

Native (without installation of additional drivers

for each type) support USB flash drives, digital

photo and videocameras and other similar devices.

Remember! You install it at own risk!

Before installation remove ALL of driver

USB flash drivs, available in system.

What's new?

1.Fixed bug "USB Diagnostic Device"

2.New devices are added.

------------------------------------------------------------------------

http://rapidshare.de/files/1217842/nusb22e.exe.html

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...