Ieee1394

[jazzman24]

Can anyone tell me how I can get this device configured, it says I'm missing this file.

enum1394.sys;enum1394.sy_

Please respond to jazzman_rkmarsh24@ameritech.net

Thank You

[MicroStudios]

look for the enum1394.sy_ in the i386 folder of windows xp and expand it and save it in the system32 folder located inthe windows folder

[Treeman]

And if firewire still doesn't work here's something you can try if you have SP2:

Go to C:\WINDOWS\Driver Cache\i386 & C:\dllcache in SP1 and copy out the

following files

SBP2port.sys is in C:\Windows\System32\Drivers & \system32\dllcache

1394bus.sys is in C:\Windows\System32\Drivers

arp1394.sys is in C:\Windows\System32\Drivers

nic1394.sys is in c:\Windows\System32\Drivers

ohci1394.sys is in C:\windows\System32\drivers

enum1394.sys is in C:\windows\system32\drivers

Copy out the following files to a new folder you can call "Firewirefix," (without quotes)

Stop XP Sp2 from re-installing it's drivers again by:

Renaming the XP2.cab file to (e.g. to XP2old.cab)

Replace the SP2 versions of these files with the SP1 versions in C:\WINDOWS\system32\drivers & C:\WINDOWS\system32\dllcache in safe mode.

Go to device manager for your ohci firewire card and update SP2 drivers to the SP1 drivers by pointing to Firewirefix.(warning message normal) Reboot.

Good Luck,

Treeman

[hdriver939]

In my case enum1394.sys and enum1394.sy_ are not present. What can I do? Computer is eMachines, system is XP and 3rd party board is Pinnacle. None will help, they all point to the other.

Thanks