Alanoll Posted February 8, 2005 Share Posted February 8, 2005 check this linkhttp://www.theeldergeek.com/forum/index.ph...wtopic=6548&hl=http://unattended.msfn.org/advanced/cosmet...rd/intronew.htmIs the official guide.And here is the updated link for the hacked files pagehttp://unattended.msfn.org/advanced/hackedfiles/other.htm Link to comment Share on other sites More sharing options...
bmn Posted February 9, 2005 Share Posted February 9, 2005 ok suraj bhai.welcome to the board.kaha se hai aap?ok abt ur problem.u can delete that winntbbu.dl_ and can keep ur modified winntbbu.dll in i386.no problem it will work.i already tested and its working nice and abt making cab files.i suggest winace.install it and while using(imean when u want to pack some file) choose ms-cabinet compression.and rename it as u wish.imean for dll--dl_,exe--ex_,jpg--jp_.thats it.hope this will help uenjoy Link to comment Share on other sites More sharing options...
Marthax Posted March 15, 2005 Share Posted March 15, 2005 I also got one question about this. I used modifype -c on winntbbu.dll and after that I cabed it down into winntbbu.dl_. Then I replaced the original files in the i386 with these, replacing both winntbbu.dll and winntbbu.dl_. When the setup copies the winntbbu.dll I get the same error as suraj. Anyone know what I should do?Edit: Nevermind, I somehow managed to solve it. I just used the -c first and afterwards cabed it down and this time it worked Anyway, thx Regards, Link to comment Share on other sites More sharing options...
sunny_jain317 Posted April 5, 2005 Share Posted April 5, 2005 make sure that you modifype -c the winntbbu.dll<{POST_SNAPBACK}>When i use modifype it always says program is too big to fit in memory. i have 128mb ram and 40gb hard disk. plz provide solution very soon. Link to comment Share on other sites More sharing options...
TheeBeets Posted April 20, 2005 Share Posted April 20, 2005 Im sorry if this is a real dumb question and ive read several post and the guide but still ament 100% sure. The original logon file in my Xp sp2 cd is WINNTBBU.DLL and I downloaded a billboard screen off here which is called WINNTBBU.DL_ what should be my next step? I was under the understanding that WINNTBBU.DL_ is the completed file name and ready for use?Fine then ignore me Link to comment Share on other sites More sharing options...
faf4life Posted April 21, 2005 Share Posted April 21, 2005 Hi..WINNTBBU.DL_ is a compressed version of the file WINNTBBU.DLL.If you want to modify it, you have to expand it using the command EXPAND.It should be enough to have either the compressed or expanded version in your I386 folder for it to work. Link to comment Share on other sites More sharing options...
edje51 Posted December 8, 2006 Share Posted December 8, 2006 (edited) Maybe stupid question, but....Do I have to modifype.exe winntbbu.dll -c before i made the changes or after the changes of thewinntbbu.dllCan't find it. Edited December 8, 2006 by edje51 Link to comment Share on other sites More sharing options...
mazin Posted December 8, 2006 Share Posted December 8, 2006 Maybe stupid question, but....Do I have to modifype.exe winntbbu.dll -c before i made the changes or after the changes of thewinntbbu.dllCan't find it.1- edit winntbbu.dll then save.2- modifype it.3- makecab it. (to save space on your CD)Delete any of winntbbu.dll or winntbbu.dl_ from your XPCD before putting your new cabbed one there.At the time of Windows Setup, if both files are there, Setup will use the uncabbed one and will ignore the cabbed one! Link to comment Share on other sites More sharing options...
edje51 Posted December 8, 2006 Share Posted December 8, 2006 THANKS, it's working now, but still have a small problem.When I run the setup, only 4 lines, or sometimes 4 lines and a half, of text is shown in the main window.Not the complete text. Do you have any ideas?Anyway I made a big step forwards.Thanks again Link to comment Share on other sites More sharing options...
mazin Posted December 8, 2006 Share Posted December 8, 2006 Did you run a real setup, or just the setup.exe, or use WINNTBBU Editor? Link to comment Share on other sites More sharing options...
edje51 Posted December 8, 2006 Share Posted December 8, 2006 (edited) Did you run a real setup, or just the setup.exe, or use WINNTBBU Editor?I did a complete set up in VMware.Also previewing it with Xpreview gave the same result. Edited December 8, 2006 by edje51 Link to comment Share on other sites More sharing options...
mazin Posted December 9, 2006 Share Posted December 9, 2006 You, probably, used a bigger font! However, a screen shot would be of help. Link to comment Share on other sites More sharing options...
edje51 Posted December 9, 2006 Share Posted December 9, 2006 (edited) You, probably, used a bigger font! However, a screen shot would be of help.First of all thank you for your patience.I did not change anything except the background. Did not change the fonts etc.Here is a screenshot: Edited December 9, 2006 by edje51 Link to comment Share on other sites More sharing options...
MGadAllah Posted December 9, 2006 Share Posted December 9, 2006 mazin...I think I should call you Mr.winntbbu Expert. Link to comment Share on other sites More sharing options...
mazin Posted December 9, 2006 Share Posted December 9, 2006 @ edje51Well! You can send me the file (WINNTBBU.DL_). I'll check it and let you know. (email: maxxin@gmail.com)@ MGadAllahThanks, mate. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now