Winpe and RIS

[explorer]

I configured Win2003 RIS with WinpE xp image. When the client system boots it say unable to display OS choices from RISserver.

Can someone explain the entire step how to configure RIS . i have winPE cd

[macgyver]

explorer, did you follow this article?

http://support.microsoft.com/default.aspx?...;304992&sd=tech

Also Try...

http://www.jsiinc.com/SUBL/tip5800/rh5805.htm

I found that you need 2 images on the server....I have a regualr XP and then PE

Always make sure it appears alphabetically last, and that you are using the correct flat image backing....

ex I use winpe1.2 so I need to use XPSP1

This is the info I've discovered for win2k, I don't know what the deal with win2k3 is yet?

[xper]

@explorer

Please don't use Report button for posting. Report button is only to report post to moderators of forums.

Anyway, here is your post:

I followed the microsoft article. It worked fine on a compaq system with Intel 100 adapter. But when with an IBM pc , its starts with "Starting WinPE " hangs and then says"unable to find the network adapters. Any exact way to solve the network card issu?!!

Add Reply button - bottom of site

[explorer]

with win 2003 serverits enough if you a single image. i work win 2003 and the microsoft article proved successful. but as i said there are problems with different network adapters. winpe doesnt start on a ibm oc having intel pro 100 onboard lan. well certain sites have given some tips like creating $oem$ folder inside i386 folder....................but in vain. any successful attempts from genius?!!