DigitalAZ Posted October 3, 2004 Author Share Posted October 3, 2004 I read that, but appearently that guy wants the users he make's AFTER an install to be tweaked as wel.. so I explained to him wot he could do..and sorry if I offended you in anyway but I still think tweaks are good for everyone and the default template for a user in the registry should be tweaked.. instead of the user tree's... Fridge.... this APPLIES TO ALL USERS AFTER INSTALL You read it but didn't read it heheNot offended just trying to be clear Link to comment Share on other sites More sharing options...
Fridge-RaideR Posted October 4, 2004 Share Posted October 4, 2004 Fridge.... this APPLIES TO ALL USERS AFTER INSTALLI meant was.. when u decide after 1 week to add another user... u used HKC_CURRENTUSER tweaks.. and when u make another user after a week.. the template of default user is used... so u got a user which isnt tweakI didnt read in the way u thought I read it but I didnt read it, but I did read it correctly u just didnt read correctly wot I wrote ur turn Link to comment Share on other sites More sharing options...
DigitalAZ Posted October 4, 2004 Author Share Posted October 4, 2004 Fridge.... this APPLIES TO ALL USERS AFTER INSTALLI meant was.. when u decide after 1 week to add another user... u used HKC_CURRENTUSER tweaks.. and when u make another user after a week.. the template of default user is used... so u got a user which isnt tweakI didnt read in the way u thought I read it but I didnt read it, but I did read it correctly u just didnt read correctly wot I wrote ur turn Ok using the steps above if you create another user 54 days after install on your girlfriends birthday while eating a chocolate sundae during the afternoon in China while wearing a baseball cap at 45 degrees angle and hopping on one foot it will apply it to ALL USERS current and future. This step modifies the default user before it is created. Link to comment Share on other sites More sharing options...
Fridge-RaideR Posted October 4, 2004 Share Posted October 4, 2004 I just wanted to edit my post, I was surfing the web and noticed u were right, because if u make cmdlines.txt like this, there is no user.. so CURRENTUSER is the default template, I was wrong sorry [COMMANDS]"REGEDIT /S regtweaks.reg"useraccounts.cmd[edit]btw if u can moderate this forum, delete our posts.. I think we confuse people [/edit] Link to comment Share on other sites More sharing options...
DigitalAZ Posted October 4, 2004 Author Share Posted October 4, 2004 [edit]btw if u can moderate this forum, delete our posts.. I think we confuse people [/edit]Actually I think it may help others who are having this struggle understand as they watch our quite entertaining banter back and forth! lol Phew my head hurts Link to comment Share on other sites More sharing options...
toe_cutter Posted October 5, 2004 Share Posted October 5, 2004 Heres a great guide on how to apply reg tweaks to every new user by defaulthttp://www.dazdezines.com/simplify-it/Guides/guide1.htmin short, you load default user\ntuser.dat into regedit, and from there add all the HKCU/HKU tweaks into it (HKU\CUSTOM) and unload, and there you have a custom ntuser.dat! Place it in $oem$\$docs\default user and it will be copied to the right place automaticly Maybe should add that to the guide? Might already be, havent read it in a while, heh Link to comment Share on other sites More sharing options...
Fridge-RaideR Posted October 5, 2004 Share Posted October 5, 2004 toe cutter, if u saw the posts here...download the tweak package here:http://www.msfn.org/board/index.php?showtopic=27911&st=0take the onces out that u dont want,make a file cmdlines.txt, place that in \$OEM$ on ur xpcdand put this in cdmlines.txt:[COMMANDS]"REGEDIT /S regtweaks.reg"this will make every tweak to the default user as well and is A LOT easier to do then that guideAND some tweaks cannot be applied in default user, so ur guide wouldnt work, and this guide here will if u wanna doublecheck this wayhttp://unattended.msfn.org Link to comment Share on other sites More sharing options...
magicfly Posted October 5, 2004 Share Posted October 5, 2004 thank you for this guide also from all the ' unattended italians ' Link to comment Share on other sites More sharing options...
toe_cutter Posted October 5, 2004 Share Posted October 5, 2004 toe cutter, if u saw the posts here...download the tweak package here:http://www.msfn.org/board/index.php?showtopic=27911&st=0take the onces out that u dont want,make a file cmdlines.txt, place that in \$OEM$ on ur xpcdand put this in cdmlines.txt:[COMMANDS]"REGEDIT /S regtweaks.reg"this will make every tweak to the default user as well and is A LOT easier to do then that guideAND some tweaks cannot be applied in default user, so ur guide wouldnt work, and this guide here will if u wanna doublecheck this wayhttp://unattended.msfn.orgYepp ive seen it, even read through ALL 98 pages of part 1 And yes again, it might just be easier doing it that way but i think the ntuser way is more professional and easier to handle, all you have to do is edit the default user and if you want to try it out then and there, create a new user account.Its a matter of preference, thats all HKLM tweaks wouldnt work with the ntuser guide no, but i add them in cmdlines.txt since they are used as default values for new users aswell. (my theory is to add the HKCU tweaks in HKLM, but i havent dared to try it yet heh)Still, its a matter of preference, i was just pointing out another way to handle the problem Link to comment Share on other sites More sharing options...
lingyun Posted October 9, 2004 Share Posted October 9, 2004 Thank you very much !I want to translate it into Chinese ! Link to comment Share on other sites More sharing options...
k0pect8 Posted October 12, 2004 Share Posted October 12, 2004 pdf file missing some parts (dl'd coupla times in case of bad file/whatnot)Slipstream clean/gold source to SP1aIf you would prefer to slipstream SP2 then continue to the next section of this guide. This portion covers SP1aCreate your directory structure (I create folders in working as preference)C:\working\xp_sourceC:\working\xp_sp1aC:\working\xp_cdxp_source contains a copy of the contents from your Windows XP Professional clean/gold source.xp_sp1a contains the Service Pack 1a Network Install executable. (xpsp1a_en_x86.exe)xp_cd contains a copy of the xp_source directory.1) Copy Contents of Windows CD to C:\working\xp_source (This will be your archive and you will move a copy to C:\working\xp_cd for modifying)The following files/folders are default for Windows XP (No Service Pack)Nice guide! Link to comment Share on other sites More sharing options...
bob463 Posted October 25, 2004 Share Posted October 25, 2004 hi people !i made my own windows xp CD with nlite , and I used the lite mode to have a very light system :the probleme is that I have no longer the language bar in the task bar ... can someone tell me how to restore it please ? maybe it's just a registery problem ? or did I removed a service / programm when I choosed "lite" ?thanx for your help Link to comment Share on other sites More sharing options...
MCT Posted October 25, 2004 Share Posted October 25, 2004 first, wrong thread 2 post your problem insecond, welcome to msfn third, i think this 1 has been discussed, & it was a conflict between 2 things, check the "what not to remove" thread in the nlite forum, i think its been posted in there Link to comment Share on other sites More sharing options...
bob463 Posted October 25, 2004 Share Posted October 25, 2004 first , thanx for your answersecond , i READ all the 9 pages in the what not to remove , and I never saw any language bar problem ... so is it "bootvis" or "Task Manager" ?third , can you give me more informations about the "conflict between 2 things" ?thanx again ^^ Link to comment Share on other sites More sharing options...
MCT Posted October 25, 2004 Share Posted October 25, 2004 look here: http://www.msfn.org/board/index.php?act=Se...language+bar%22ive searched for "language bar" in the nlite forum, i cant spend the time 2 look for u, cuz i gotta get 2 bed, cuz ive gotta work tomorrow Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now