creopard Posted August 11, 2004 Share Posted August 11, 2004 Hi there,I just tested my slipstreamed SP2 but XP won't automatically setup my NIC anymore with below settings Did anyone else experience this strange behaviour?(Worked just fine with RC2)[NetAdapters] Adapter1=params.Adapter1[params.Adapter1] INFID=*[NetClients] MS_MSClient=params.MS_MSClient[NetServices] MS_SERVER=params.MS_SERVER[NetProtocols] MS_TCPIP=params.MS_TCPIP[params.MS_TCPIP] DNS=No DNSSuffixSearchOrder=lan.fli4l UseDomainNameDevolution=No EnableLMHosts=No AdapterSections=params.MS_TCPIP.Adapter1[params.MS_TCPIP.Adapter1] SpecificTo=Adapter1 DHCP=No IPAddress=192.168.0.4 SubnetMask=255.255.255.0 DefaultGateway=192.168.0.1 DNSServerSearchOrder=192.168.0.1 WINS=No NetBIOSOptions=1 Link to comment Share on other sites More sharing options...
visaversa Posted August 11, 2004 Share Posted August 11, 2004 why "params.MS_TCPIP with RC2 - No go? " Link to comment Share on other sites More sharing options...
Alanoll Posted August 11, 2004 Share Posted August 11, 2004 params.MS_TCPIP with RC2 go- With RTM No go?Reads just fine for me (I changed it) Link to comment Share on other sites More sharing options...
visaversa Posted August 11, 2004 Share Posted August 11, 2004 ok alanoll, to be honest i have no problems to...swgreed, can you give the whole tcp settings fron winnt.sif? Link to comment Share on other sites More sharing options...
creopard Posted August 12, 2004 Author Share Posted August 12, 2004 @visaversa: my winnt.sif (especially network section) worked just fine with RC2 but does not with SP2 RTM.These are all tcp-settings in winnt.sifI don't know what MS changed, all is set to DHCP The only thing that is adjusted is the "DNSSuffixSearchOrder" setting"IPAddress, SubnetMask,etc" everything will be overridden anyone else with this behaviour?? Link to comment Share on other sites More sharing options...
visaversa Posted August 12, 2004 Share Posted August 12, 2004 @visaversa: my winnt.sif (especially network section) worked just fine with RC2 but does not with SP2 RTM.These are all tcp-settings in winnt.sifI don't know what MS changed, all is set to DHCP The only thing that is adjusted is the "DNSSuffixSearchOrder" setting"IPAddress, SubnetMask,etc" everything will be overridden anyone else with this behaviour??probably i have today or tomorrow a network install ready and see if this also occur at my site. I to have some machines on dhcp and some on fixed ip settingsi keep you informed... Link to comment Share on other sites More sharing options...
creopard Posted August 12, 2004 Author Share Posted August 12, 2004 thanks, i'm looking forward to it!I did a couple of tests today and couldn't find out whats wrong. It seems as if these settings are just ignored Link to comment Share on other sites More sharing options...
oioldman Posted September 24, 2004 Share Posted September 24, 2004 I too have this problem, and as yet have not found a way for the settings within the winnt.sif to be used.I use slipstreamed SP2 FULL.Did anybody get this working. I'm at work so will post winnt sif details later, but they are gathered from using the tool as part of the deploy.cab.So if anybody could shed light on how to make iot work - appreciation will be high. Link to comment Share on other sites More sharing options...
Tsunami Posted September 24, 2004 Share Posted September 24, 2004 Did you add the [Networking] section to your winnt.sif The [Networking] section contains no entries. However, to configure network protocols in unattended Setup or to use Sysprep, you must include the [Networking] section name in your answer file. Link to comment Share on other sites More sharing options...
oioldman Posted September 27, 2004 Share Posted September 27, 2004 Yes i do have that section within the winnt.sif file.PC died at weekend, so had to add it in manually, will remember tonight to add here. Link to comment Share on other sites More sharing options...
Mr Snrub Posted September 27, 2004 Share Posted September 27, 2004 Here is the code I use for setting up my Shuttle SS51G, which successfully names and configures my 2 NICs:[Networking] InstallDefaultComponents=No[NetAdapters] Adapter1=params.Adapter1 Adapter2=params.Adapter2[params.Adapter1] ConnectionName="nVidia 100Mbps" INFID=PCI\VEN_10EC&DEV_8139&SUBSYS_813910EC[params.Adapter2] ConnectionName="CNet 1Gbps" INFID=PCI\VEN_100B&DEV_0022&SUBSYS_00000000[NetClients] MS_MSClient=params.MS_MSClient[NetServices] MS_SERVER=params.MS_SERVER[NetProtocols] MS_TCPIP=params.MS_TCPIP[NetBindings] Enable="MS_Server, MS_NetBT, MS_TCPIP, Adapter1" Enable="MS_Server, MS_NetBT, MS_TCPIP, Adapter2"[params.MS_TCPIP] DNS=No UseDomainNameDevolution=No EnableLMHosts=Yes AdapterSections=params.MS_TCPIP.Adapter1,params.MS_TCPIP.Adapter2[params.MS_TCPIP.Adapter1] SpecificTo=Adapter1 DHCP=No IPAddress=10.0.0.2 SubnetMask=255.255.255.0 NetBIOSOptions=0[params.MS_TCPIP.Adapter2] SpecificTo=Adapter2 DHCP=No IPAddress=192.168.1.2 SubnetMask=255.255.255.0 DefaultGateway=192.168.1.254 DNSServerSearchOrder=192.168.1.254 WINS=Yes WinsServerList=192.168.1.80 NetBIOSOptions=1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now