darrellw Posted May 9, 2004 Share Posted May 9, 2004 having a bash at using xpcreate, seemed to going ok but getting this error message after the files have been extracted. "cannot find or extract a boot image value Xpctboot.bin" here is a copy of my configuration settings[XPCREATE]XPSOURCE=E:\BOOTIMGFILE=H:\XPISO=XPCREATE.ISOCDERASE=NOCDSPEED=24CDBURNER=I:below is a copy of my log file---------------------------------------------------------------------------------- 2:46:18 -- Setting Variables --------------------------------------------------------------------------------@ECHO OFF SET XPSOURCE=E:\SET BOOTIMGFILE=H:\SET XPISO=XPCREATE.ISOSET CDERASE=NOSET CDSPEED=24SET CDBURNER=I:---------------------------------------------------------------------------------- 2:46:18 -- Setting up Run-Time Variables. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:46:18 -- Listing Hotfixes and Updates ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:46:18 -- Removing Previous Creation directories. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:46:18 -- Removing TEMP Files. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:46:18 -- Creating TEMP directories. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:46:18 -- Start copying files. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:16 -- Determine Source Version. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:17 -- Found Source Version: XPP ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:17 -- Found Minor Version: 1 ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:17 -- Found Service Pack Version: 0 ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:17 -- Found Language Version: ENU --------------------------------------------------------------------------------H:QCHAIN.EXE1 File(s) copied---------------------------------------------------------------------------------- 2:49:17 -- Repack all the Special Case Type II Hotfixes ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:17 -- Merging Hotfixes. --------------------------------------------------------------------------------0 File(s) copied0 File(s) copied0 File(s) copiedTEMP\SVC-EXE\QCHAIN.EXE1 File(s) copied---------------------------------------------------------------------------------- 2:49:18 -- Creating Command File to extract Hotfixes. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:18 -- Launching Hotfix Extraction script. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:18 -- Saving the CAT files. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:18 -- All Hotfixes extracted: Clean out the junk files. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:18 -- Expanding the CABS. This will take a moment. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:49:18 -- Expanding: DRIVER.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:02 -- Expanding: FP40EXT.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:03 -- Expanding: IIS6.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:15 -- Expanding: IMS.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:15 -- Expanding: MANAGER.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:15 -- Expanding: MMSSETUP.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:16 -- Expanding: MODEM.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:17 -- Expanding: OSC.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:17 -- Expanding: WIN.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:17 -- Expanding: WINSYS.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:17 -- Expanding: WINSYS32.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:17 -- Find out which files come from CABs. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:50:19 -- Get everything from DRIVER.CAB. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:01 -- Update the DRIVER and SPx CABS. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:01 -- Adding new CAB files if needed. --------------------------------------------------------------------------------0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied---------------------------------------------------------------------------------- 2:51:09 -- CAB DRIVER Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:09 -- CAB FP40EXT Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB IIS6 Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB IMS Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB MANAGER Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB MMSSETUP Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB MODEM Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB OSC Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB WIN Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB WINSYS Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- CAB WINSYS32 Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- Update the DOSNET.INF file -------------------------------------------------------------------------------- 1 file(s) copied.---------------------------------------------------------------------------------- 2:51:11 -- Figure out which files are new ... ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:11 -- Files in CABs are not new. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:15 -- Files in I386 are not new. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:15 -- Add list of New Files to [Files] in DOSNET.INF. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:15 -- RoyalBox's SVCPACK.INF Creator --------------------------------------------------------------------------------H:SVCPACK.INF1 File(s) copied---------------------------------------------------------------------------------- 2:51:15 -- Adding SATA/RAID support. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:15 -- Update uncompressed versions. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:51:15 -- Compressing all the hotfix Files. --------------------------------------------------------------------------------Microsoft ® File Compression Utility Version 5.00.1980.1Copyright © Microsoft Corp. 1990-1999. All rights reserved.Compressing temp\workdir\svcpack.inf to temp\savedir\svcpack.in_ using LZX compression.Memory window size: 21.temp\workdir\svcpack.inf: 213 bytes compressed to 314 bytes, -47% savings.---------------------------------------------------------------------------------- 2:51:15 -- Put all the files for the CD together --------------------------------------------------------------------------------TEMP\SAVEDIR\svcpack.in_1 File(s) copiedTEMP\SVCPACK\QCHAIN.EXE1 File(s) copiedFILESCD\I386\winnt.sifFILESCD\SPACKS\xpsp1_en_x86.exeFILESCD\BOOT\XPCTBOOT.BINFILESCD\SVC-X2M\dotnetfx.exeFILESCD\SVC-X2M\setup.exeFILESCD\SVC-WMP\MPSetupXP.exeFILESCD\SVC-MSX\HMTCDWizard_enu.exeFILESCD\SVC-MDC\ENU_Q832483_MDAC_x86.EXEFILESCD\SVC-HF2\hu1002_pro.exeFILESCD\SVC-HF2\js56nen.exeFILESCD\SVC-HF2\q330994.exeFILESCD\SVC-HF2\Q832894.exeFILESCD\SVC-HF1\Q322011_WXP.exeFILESCD\SVC-HF1\Q327979_WXP_SP2_x86_ENU.exeFILESCD\SVC-HF1\Q811114_WXP_SP2_x86_ENU.exeFILESCD\SVC-HF1\Q814995_WXP_SP2_x86_ENU.exeFILESCD\SVC-HF1\WindowsMedia-Q828026-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB810217-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB820291-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB821253-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB822603-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB823182-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB824105-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB824141-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB825119-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB826939-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB826942-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB828028-x86-ENU_dafcbb0af5770c430b3c354604df31c[1].exeFILESCD\SVC-HF1\WindowsXP-KB828035-x86-ENU.exe29 File(s) copiedH:DOSNET.INF1 File(s) copiedH:\TEMP\SAVEDIR\SVCPACK.IN_1 File(s) copied---------------------------------------------------------------------------------- 2:51:50 -- Create an ISO image --------------------------------------------------------------------------------The system cannot find the file specified.---------------------------------------------------------------------------------- 2:51:59 -- Burning ISO image --------------------------------------------------------------------------------H:DOSNET.INFH:SVCPACK.INF2 File(s) copied---------------------------------------------------------------------------------- 2:52:00 -- Started at: 2:46:18 ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 2:52:00 -- Finished at: 2:52:00 --------------------------------------------------------------------------------am trying to use the boot image created by isobuster that i used to make my "xp slipstreamed with Sp1 cd" that is in the directory H:\.realise that i am probably doing something really silly, but am only playing at this and do not really have any real computer knowledge apart from the odd building/upgradinghad a bash burning files in cdroot directory in nero but at the end of the install got the error message"windows cannot find C:\install\hotfixes\hotfixes.cmd"so obviously there is something missing, will have to sleep on it, bound to have missed somethingcheersdarrellw Link to comment Share on other sites More sharing options...
swampy Posted May 9, 2004 Share Posted May 9, 2004 In XPCREATE.INI you need:BOOTIMGFILE=BOOT\XPCTBOOT.BINHave look in the BOOT directory, XPCTBOOT.BIN should be in there, it comes with XPCREATE. Link to comment Share on other sites More sharing options...
darrellw Posted May 9, 2004 Author Share Posted May 9, 2004 cheers for the reply, located the file, changed the file to readBOOTIMGFILE=H:\FILESCD\BOOTwill see if this workscheers againdarrellwthat is that problem solved, but onto the next. cannot boot with the cd error message"cdboot - cannot boot code 5"B******Sback to the drawing board Link to comment Share on other sites More sharing options...
darrellw Posted May 9, 2004 Author Share Posted May 9, 2004 thought i might aswell start a new post as most of the problems with previous post now sorted thanks to swampy.was having problem burning cd but changed line in config to readBOOTIMGFILE=H:\FILESCD\BOOTthis sorted out my burning the cd error but now getting error message when trying to boot from the cd"cannot boot code 5"any suggestions??????????cheersdarrellw Link to comment Share on other sites More sharing options...
Alanoll Posted May 9, 2004 Share Posted May 9, 2004 you didn't specify as bootimgfile. You specified a path, not the file.as you trying to use CDShell? Link to comment Share on other sites More sharing options...
darrellw Posted May 9, 2004 Author Share Posted May 9, 2004 cheers for the reply, just showing my ignorance but managed to burn the files in nero by making a bootable cd using the bootimage file from isobuster, after extracting the iso image via isobuster.will see whether this installs the hotfixes or not.to correct my earlier mistake should the line readBOOTIMGFILE=H:\FILESCD\BOOT\XPCDBOOTplease correct me if i am wrong as i say i am really new to this side of the game, and to be quite honest have yet to get the hang of stuff like thisappreciate your helpdarrellw Link to comment Share on other sites More sharing options...
Alanoll Posted May 9, 2004 Share Posted May 9, 2004 is XPCDBOOT the actual file, because files usually have extensions Link to comment Share on other sites More sharing options...
darrellw Posted May 9, 2004 Author Share Posted May 9, 2004 managed to sort out getting the cd to boot, (another post) but now getting this error message"windows cannot find c:\install\hotfixes\hotfixes\.cmd"know that i have probably once again missed out something really simple, but cannot locate any info on the above.here is a copy of my config settings[XPCREATE]XPSOURCE=D:\XPBOOTIMGFILE=H:\XPCREATE\FILESCD\BOOTXPISO=XPCREATE.ISOCDERASE=NOCDSPEED=24DOCABS=YESDOSVCPACK=YESSLIPHF1=YES SLIPHF2=YESstill having problems getting the cd created by xpxreate to be bootable so deleted the instruction to boot from the file and am currently xtracting with isobuster and burning with nero, any ideashere is my logfile---------------------------------------------------------------------------------- 12:48:49 -- Setting Variables --------------------------------------------------------------------------------@ECHO OFF SET XPSOURCE=D:\XPSET BOOTIMGFILE=H:\XPCREATE\FILESCD\BOOTSET XPISO=XPCREATE.ISOSET CDERASE=NOSET CDSPEED=24SET CDBURNER=I:SET DOCABS=YESSET DOSVCPACK=YESSET SLIPHF1=YES SET SLIPHF2=YES---------------------------------------------------------------------------------- 12:48:49 -- Setting up Run-Time Variables. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:48:49 -- Listing Hotfixes and Updates ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:48:49 -- Removing Previous Creation directories. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:48:49 -- Removing TEMP Files. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:48:49 -- Creating TEMP directories. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:48:49 -- Start copying files. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:38 -- Determine Source Version. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:39 -- Found Source Version: XPP ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:39 -- Found Minor Version: 1 ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:39 -- Found Service Pack Version: 0 ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:39 -- Found Language Version: ENU --------------------------------------------------------------------------------H:QCHAIN.EXE1 File(s) copied---------------------------------------------------------------------------------- 12:50:39 -- Repack all the Special Case Type II Hotfixes ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:39 -- Merging Hotfixes. --------------------------------------------------------------------------------0 File(s) copied0 File(s) copied0 File(s) copiedTEMP\SVC-EXE\QCHAIN.EXE1 File(s) copied---------------------------------------------------------------------------------- 12:50:40 -- Creating Command File to extract Hotfixes. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:40 -- Launching Hotfix Extraction script. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:40 -- Saving the CAT files. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:40 -- All Hotfixes extracted: Clean out the junk files. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:40 -- Expanding the CABS. This will take a moment. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:50:40 -- Expanding: DRIVER.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:20 -- Expanding: FP40EXT.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:23 -- Expanding: IIS6.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:32 -- Expanding: IMS.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:33 -- Expanding: MANAGER.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:33 -- Expanding: MMSSETUP.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:34 -- Expanding: MODEM.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:35 -- Expanding: OSC.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:36 -- Expanding: WIN.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:36 -- Expanding: WINSYS.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:36 -- Expanding: WINSYS32.CAB ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:36 -- Find out which files come from CABs. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:51:38 -- Get everything from DRIVER.CAB. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:17 -- Update the DRIVER and SPx CABS. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:17 -- Adding new CAB files if needed. --------------------------------------------------------------------------------0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied0 File(s) copied---------------------------------------------------------------------------------- 12:52:24 -- CAB DRIVER Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:24 -- CAB FP40EXT Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB IIS6 Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB IMS Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB MANAGER Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB MMSSETUP Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB MODEM Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB OSC Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB WIN Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB WINSYS Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- CAB WINSYS32 Does NOT need RePacking ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:25 -- Update the DOSNET.INF file -------------------------------------------------------------------------------- 1 file(s) copied.---------------------------------------------------------------------------------- 12:52:25 -- Figure out which files are new ... ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:26 -- Files in CABs are not new. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:29 -- Files in I386 are not new. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:29 -- Add list of New Files to [Files] in DOSNET.INF. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:29 -- RoyalBox's SVCPACK.INF Creator --------------------------------------------------------------------------------H:SVCPACK.INF1 File(s) copied---------------------------------------------------------------------------------- 12:52:29 -- Adding SATA/RAID support. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:29 -- Update uncompressed versions. ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:52:29 -- Compressing all the hotfix Files. --------------------------------------------------------------------------------Microsoft ® File Compression Utility Version 5.00.1980.1Copyright © Microsoft Corp. 1990-1999. All rights reserved.Compressing temp\workdir\svcpack.inf to temp\savedir\svcpack.in_ using LZX compression.Memory window size: 21.temp\workdir\svcpack.inf: 213 bytes compressed to 314 bytes, -47% savings.---------------------------------------------------------------------------------- 12:52:29 -- Put all the files for the CD together --------------------------------------------------------------------------------TEMP\SAVEDIR\svcpack.in_1 File(s) copiedTEMP\SVCPACK\QCHAIN.EXE1 File(s) copiedFILESCD\I386\winnt.sifFILESCD\SPACKS\xpsp1_en_x86.exeFILESCD\BOOT\XPCTBOOT.BINFILESCD\SVC-X2M\dotnetfx.exeFILESCD\SVC-X2M\setup.exeFILESCD\SVC-WMP\MPSetupXP.exeFILESCD\SVC-MSX\HMTCDWizard_enu.exeFILESCD\SVC-MDC\ENU_Q832483_MDAC_x86.EXEFILESCD\SVC-HF2\hu1002_pro.exeFILESCD\SVC-HF2\js56nen.exeFILESCD\SVC-HF2\q330994.exeFILESCD\SVC-HF2\Q832894.exeFILESCD\SVC-HF1\Q322011_WXP.exeFILESCD\SVC-HF1\Q327979_WXP_SP2_x86_ENU.exeFILESCD\SVC-HF1\Q811114_WXP_SP2_x86_ENU.exeFILESCD\SVC-HF1\Q814995_WXP_SP2_x86_ENU.exeFILESCD\SVC-HF1\WindowsMedia-Q828026-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB810217-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB820291-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB821253-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB822603-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB823182-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB824105-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB824141-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB825119-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB826939-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB826942-x86-ENU.exeFILESCD\SVC-HF1\WindowsXP-KB828028-x86-ENU_dafcbb0af5770c430b3c354604df31c[1].exeFILESCD\SVC-HF1\WindowsXP-KB828035-x86-ENU.exe29 File(s) copiedH:DOSNET.INF1 File(s) copiedH:\XPCREATE\TEMP\SAVEDIR\SVCPACK.IN_1 File(s) copied---------------------------------------------------------------------------------- 12:52:58 -- Create an ISO image --------------------------------------------------------------------------------H:\XPCREATE\FILESCD\BOOT\XPCTBOOT.BIN 1 file(s) copied.---------------------------------------------------------------------------------- 12:54:26 -- Burning ISO image --------------------------------------------------------------------------------H:DOSNET.INFH:SVCPACK.INF2 File(s) copied---------------------------------------------------------------------------------- 12:59:22 -- Started at: 12:48:49 ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 12:59:22 -- Finished at: 12:59:22 --------------------------------------------------------------------------------cheersdarrellw Link to comment Share on other sites More sharing options...
Alanoll Posted May 9, 2004 Share Posted May 9, 2004 you're problem is with WINNT.SIF not XPCREATE.you need OEMPreInstall=Yes in Unattended Link to comment Share on other sites More sharing options...
GreenMachine Posted May 9, 2004 Share Posted May 9, 2004 @darrellw: A quick look at your post shows that your XPCREATE file structure is amiss, and that your XPCREATE.INI file is not that shipped with XPCREATE. Use the standard procedures, and try a minimal CD, using only thies files listed on the Current Hotfixes page.Unless you know what you are doing ... there is no reason to be modifying the files and directory strutures as you have done ...@All: Please include the LOGFILES.CAB file in the NEWFILES directory instead of pasting the log file into the post. Link to comment Share on other sites More sharing options...
darrellw Posted May 9, 2004 Author Share Posted May 9, 2004 cheers for the replies, managed to get rid of my latest error message "windows cannot find C:\install\hotfixes\hotfixes.cmd"thanks to alanoll, but still not installing sp1 or any of the hotfixes.with regard to the other points, would this be better[XPCREATE]XPSOURCE=E:\BOOTIMGFILE=H:\FILESCD\BOOTXPISO=XPCREATE.ISOCDERASE=NOCDSPEED=24delete these CDBURNER=I:DOCABS=YESDOSVCPACK=YESSLIPHF1=YES SLIPHF2=YESto be quite honest i really have no idea what i am doing trying this project as i have no real computer knowledge.reason i added these lines in was an attenpt to get the installation to install the hotfixesi have tried searching this forum and the web in an attempt to find a really good guide that explains/illustrates EXACTLY how to do this. the guides supplied are to be quite honest incomplete and i have no idea how to sort out why i cannot get it to work.cheers for all the assistancedarrellwnot sure what you mean by"@All: Please include the LOGFILES.CAB file in the NEWFILES directory instead of pasting the log file into the post.how does the xp installation know where the hotfix files???????do i need to use $OEM$ and the like which are part of "MSFN Unattended method" which i assumed to be separate to the XpCreate method of adding hotfixes???cheers againdarrellw Link to comment Share on other sites More sharing options...
Alanoll Posted May 9, 2004 Share Posted May 9, 2004 umm....did you even LOOK at his site? and LOGFILES.CAB is the file XPCReate makes after the process, and located in the NEWFILES directory inside where you executed XPCreate.greenmachine.msfnhosting.commake a minimal WORKING installation before going any farther. Before adding winnt.sif or anything. Just do what his site tells you, AND THEN add to it. You're not putting the hotfix files where his website is telling you, you're trying to add them yourself. Just follow his site with regards to Hotfixes and you'll be fine. Link to comment Share on other sites More sharing options...
GreenMachine Posted May 9, 2004 Share Posted May 9, 2004 Sounds like Alanoll's been reading too many of my posts: he's starting to sound like me! XPCREATE don't know nothin': it is looking for files where YOU were supposed to put them. Like the man said: follow the minimal steps, listed on the site, and if that does not work, attach LOGFILES.CAB to your post, explaining exactly what went wrong. Link to comment Share on other sites More sharing options...
Alanoll Posted May 9, 2004 Share Posted May 9, 2004 well, I have seen quite a few of your posts lately with the:"Read the site, post the logfiles, or start with the basics" Link to comment Share on other sites More sharing options...
GreenMachine Posted May 9, 2004 Share Posted May 9, 2004 Sadly, most of the time that fixes the problem. There have been almost no core logic changes to XPCREATE for a long time ... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now