mockingbird Posted April 29, 2022 Share Posted April 29, 2022 I tried the 4.0 release, and I now have an unknown device: "ACPI\INT33A1" The motherboard is an AsRock B250M-Pro4 Any ideas? Thanks Link to comment Share on other sites More sharing options...
Mov AX, 0xDEAD Posted April 29, 2022 Author Share Posted April 29, 2022 1 minute ago, mockingbird said: I tried the 4.0 release, and I now have an unknown device: "ACPI\INT33A1" Any ideas? @mockingbird It is OK, service device for Windows 10 only, it doesnt require any driver Just ignore or install manually from Chipset Driver by Intel (i think need special adapted to XP modded version) Link to comment Share on other sites More sharing options...
LanXing Posted April 30, 2022 Share Posted April 30, 2022 On 4/28/2022 at 7:44 PM, George King said: Here are compiled ACPI2.0 v4 from latest sources 1) x86 Windows XP x86 SP3 (5.1.2600.7777.4) + Windows Server 2003 SP2 (5.2.3790.7777.4) debug and free 2) x64 Windows Server 2003 / XP SP2 (5.2.3790.7777.4) debug and free https://www.mediafire.com/file/wsqgptapdrxhidf/ACPI2.0_v4_x86+x64_5.1+5.2.7z/file Extras included: a) _OSI extra OS list to unlock hidden devices b) modded acpiosnt.rc to overwrite PruductVersion attribute in file info, replaced "," with "." so it's now in same logic as other standard files, added .4 to easily detect which patch was used as build base acpi.sys: ACPI2.0_v4_x86 / 5.1.2600.7777.4 / i386_debug acpi.sys: AcpiV4freeandDebug.7z / debug STOP 0x000000A5(0x0000003,0x30315A54,0xC0000034,0x494E495F) , when xp-sp3 setup on my PC. BSOD and reboot, when replace acpi6666(2021.8.28) --- acpi6666(2021.8.28) is good on my PC. My PC: CPU: Athlon 200GE RAM: 32GB=16GBX2 GPU: IGPU--Radeon Vega 3 Graphics MB: B450M AORUS ELITE (rev. 1.x) BIOS: F64a , AMD AGESA V2 1.2.0.6 B -------------------------------------------------------------------------------------------------------------------------- The acpi.sys ( acpi 6666 - 2021.8.28 - daniel_k, diderius6) can work, only Restart does not work when using a ps/2 mouse. and The nvme driver is code10, when this IGPU is 2G or 1G or auto. (NVME Driver schtrom V1.3/V1.5, NVME win7) The nvme driver is good ,when this IGPU is 512M. (NVME Driver schtrom V1.5) PS: IGPU Auto: Intergrated graphics: Auto IGPU 2G : Intergrated graphics: Forces -->UMA Mode:UMA Specfified -->UMA frame Buffer Size: 2G ) IGPU 1G : Intergrated graphics: Forces -->UMA Mode:UMA Specfified -->UMA frame Buffer Size: 1G ) IGPU 512M: Intergrated graphics: Forces -->UMA Mode:UMA Specfified -->UMA frame Buffer Size: 512M ) Link to comment Share on other sites More sharing options...
Dietmar Posted April 30, 2022 Share Posted April 30, 2022 @LanXing The Bsod 0x000000A5 (0x00000003, xxx, 0xC0000034, yyy) happens in acpi.sys, when ACPIBuildCompleteMustSucceed fails. We need a log file via Windbg, to find the reason for this. A first check with Ida Pro shows this error 0xC0000034 at 11 different places, always with mov ..., C0000034 Dietmar Link to comment Share on other sites More sharing options...
Mov AX, 0xDEAD Posted April 30, 2022 Author Share Posted April 30, 2022 (edited) 8 hours ago, LanXing said: STOP 0x000000A5(0x0000003,0x30315A54,0xC0000034,0x494E495F) , when xp-sp3 setup on my PC. MB: B450M AORUS ELITE (rev. 1.x) BIOS: F64a , AMD AGESA V2 1.2.0.6 B A5(0x3,"TZ10", STATUS_OBJECT_NAME_NOT_FOUND/AMLIERR_OBJ_NOT_FOUND, "_INI") Quote Scope (\_TZ) { ThermalZone (TZ10) { Method (_INI, 0, NotSerialized) // _INI: Initialize { \GSA1.ZRC0 () } Quote Scope (\) { Device (GSA1) { ..... Method (ZRC0, 0, NotSerialized) { ZRCU (Zero) ZRCV () ZRD0 = One ZRCU (One) } I don't see any problem with this code, so only remote debugging can say more this B450 has realtek LAN chip, it is possible, need time and wish :) Edited April 30, 2022 by Mov AX, 0xDEAD Link to comment Share on other sites More sharing options...
LanXing Posted April 30, 2022 Share Posted April 30, 2022 3 hours ago, Dietmar said: @LanXing The Bsod 0x000000A5 (0x00000003, xxx, 0xC0000034, yyy) happens in acpi.sys, when ACPIBuildCompleteMustSucceed fails. We need a log file via Windbg, to find the reason for this. A first check with Ida Pro shows this error 0xC0000034 at 11 different places, always with mov ..., C0000034 Dietmar There is no MINIDUMP file after BSOD. Link to comment Share on other sites More sharing options...
Dietmar Posted April 30, 2022 Share Posted April 30, 2022 (edited) @LanXing Make try to disable something like "thermal zone" in Bios and try acpi.sys V4 again Dietmar PS: I just take a look into the DSDT table from my Asus ROG STRIX B450-F GAMING II board. There is no device TZ10. Edited April 30, 2022 by Dietmar Link to comment Share on other sites More sharing options...
Dietmar Posted April 30, 2022 Share Posted April 30, 2022 Win10 seems to have this problem also Dietmar Windows 10 BSOD Help This is a brand new computer minus the GPU. Fresh windows 10 install. Display would freeze for a few seconds and the PC would reboot. Was wondering if it was a riser cable issue or PSU issue or driver issue. AMD 5900x EKWB 240 Basic AIO Gigabyte x570 I 1TB Sabrent Rocket NVMe 4.0 32GB DDR4 Corsair SF600 Gold with Corsair SF sleeved cables RX 580 /w 3.0 Riser Cable In the event viewer I see: ACPI thermal zone \_TZ.TZ10 has been enumerated. _PSV = 290K _TC1 = 0 _TC2 = 0 _TSP = 1000ms _AC0 = 0K _AC1 = 0K _AC2 = 0K _AC3 = 0K _AC4 = 0K _AC5 = 0K _AC6 = 0K _AC7 = 0K _AC8 = 0K _AC9 = 0K _CRT = 294K _HOT = 293K minimum throttle = 0 _CR3 = 0K Link to comment Share on other sites More sharing options...
George King Posted April 30, 2022 Share Posted April 30, 2022 Another BSOD from MDL, on Z690 machine mentioned here https://forums.mydigitallife.net/threads/god-damn-0x0000007b.85292/ Link to comment Share on other sites More sharing options...
LanXing Posted April 30, 2022 Share Posted April 30, 2022 2 hours ago, Dietmar said: @LanXing Make try to disable something like "thermal zone" in Bios and try acpi.sys V4 again Dietmar PS: I just take a look into the DSDT table from my Asus ROG STRIX B450-F GAMING II board. There is no device TZ10. 1、Good -- NO BSOD, when " Downcore Control : one " and " SMT Mode : Close " in Bios 2、A5 BSOD, when " SMT Mode : Auto " in Bios 3、A5 BSOD, when " Downcore Control : Auto " or " Downcore Control : two " in Bios Link to comment Share on other sites More sharing options...
Damnation Posted April 30, 2022 Share Posted April 30, 2022 @LanXing have you got a 2nd PC to spare for LAN debugging? If you're willing to setup LAN debugging that's your best chance of getting a solution. Link to comment Share on other sites More sharing options...
Dietmar Posted April 30, 2022 Share Posted April 30, 2022 (edited) Here is another report about TZ10 on a Gigabyte 450 board Dietmar ACPI thermal zone - does my pc think it’s overheating? Open I’ve had some issues with my computer recently. From the most recent breaking point, I was playing PUBG when big black lines started appearing through the game world, then the game just shut down and other apps starting freezing and shutting down. No error messages etc of any kind. Since then, I could log into windows for a bit but the same thing would happen - apps just shut down and nothing would really work. The screen would flicker black and eventually just go fully black. However, it does work in safe mode - although stuff starts shutting down if anything is “intensive”, like scrolling around a google search in chrome. I’ve had a look through event logs and there’s a lot to see, none of which I really understand. I can post lots more if that’d be helpful and if one issue in particular that I think could be relevant turns out to be wrong. So that specific log is ACPI TZ.TZ10 thermal zone has been enumerated. What I understand is it’s just saying how hot it is, but it also lists CRT and HOT values for when it starts throttling/shutting down? (But if that’s wrong please do say, then I can move onto the next theory) For that log, the HOT and CRT values are 292 and 291 kelvin, which is about 19 degrees Celsius, so my thought was that the computer starts throttling things way earlier than it really should. Am I completely wrong or maybe onto something?? I also flashed the BIOS, thinking maybe that was the issue, no help. The computers specs are: Motherboard: Gigabyte 450M S2H CPU: Ryzen 1600X GPU: NVIDIA 1050ti RAM: 8gb hyperx/fusion/Kingston (whichever it is..) PSU: NAXN 500W Edited April 30, 2022 by Dietmar Link to comment Share on other sites More sharing options...
Damnation Posted April 30, 2022 Share Posted April 30, 2022 @Dietmar meed more information. Install HWMonitor and report CPU and GPU temps when both idle and stressed. Link to comment Share on other sites More sharing options...
George King Posted April 30, 2022 Share Posted April 30, 2022 (edited) @LanXing Does this DDB hack help? EDIT: Fixed achitectures https://anonfiles.com/vca7hfc0y0/ACPI2.0_DDB_Fix_7z Edited May 1, 2022 by George King Link to comment Share on other sites More sharing options...
Mov AX, 0xDEAD Posted April 30, 2022 Author Share Posted April 30, 2022 3 hours ago, Damnation said: @LanXing have you got a 2nd PC to spare for LAN debugging? If you're willing to setup LAN debugging that's your best chance of getting a solution. @LanXing Manual to setup remote debug connection to save crashlog: https://github.com/MovAX0xDEAD/KDNET Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now