George King Posted January 7, 2024 Posted January 7, 2024 @Ratte Your mentioned drivers cannot be ported with Extender, as I already told you in PM, there are too much missing imports in newer drivers than 8056. I have already tried adding all PoFx.. functions as blank stubs. This wont work. Until you decompile and rewrite these functions. They have a lot of callbacks and probably not possible to rebuild them without some code leak.
fuckuing49ehju Posted January 24, 2024 Posted January 24, 2024 it would be lifechanging for so many laptops that are going to e-waste. I hope you guys succeed. 1
XPerceniol Posted January 24, 2024 Posted January 24, 2024 They are predicting that after windows 10 end support in October 2025 lots of computers will become just that; e-waste.
D.Draker Posted January 25, 2024 Posted January 25, 2024 18 hours ago, XPerceniol said: They are predicting that after windows 10 end support in October 2025 lots of computers will become just that; e-waste. Which is very good for the Western economy. 2
fuckuing49ehju Posted March 4, 2024 Posted March 4, 2024 Wished there was a way to natively run windows 7, I love using win7, now i use win8 but this constant metro ui switch makes me go nuts.
mshultz Posted March 5, 2024 Posted March 5, 2024 16 hours ago, f***uing49ehju said: Wished there was a way to natively run windows 7, I love using win7, now i use win8 but this constant metro ui switch makes me go nuts. Just use Open-Shell: https://open-shell.github.io/Open-Shell-Menu/ It works with Windows 7, 8, 8.1, 10, and 11. I use it on my Windows 10 desktop and my Windows 8.1 notebook. I also use UBitMenu with Microsoft Office 2010: https://www.ubit.ch/software/ubitmenu-languages
fuckuing49ehju Posted March 11, 2024 Posted March 11, 2024 (edited) On 3/5/2024 at 2:26 PM, mshultz said: Just use Open-Shell: https://open-shell.github.io/Open-Shell-Menu/ It works with Windows 7, 8, 8.1, 10, and 11. I use it on my Windows 10 desktop and my Windows 8.1 notebook. I also use UBitMenu with Microsoft Office 2010: https://www.ubit.ch/software/ubitmenu-languages Yeah I know I use it but it doesn't feel the same. I used win 8 to 7 transformation pack but it f**ks up after applying a update. Modern lightweight Linux distros don't even work efficiently in this laptop. I currently use windows 8 pro, its very good in terms of performance but I hate the design. I tried using Windows 7 using WinToUSB but it's IO performance is really bad. There is no SATA interface on my laptop, everything is soldered. I ordered USB SATA adapter and I will try to solder that USB and put small SSD inside. I also tried windows 8 developer build 8102 (EEAP). I could get it working with eMMC and install graphics driver after disabling DWM but I couldn't get Wi-Fi to work, only ethernet works. I tried many Windows 7 ISOs including OEM, POSReady, Thin Client and so on and nothing works as expected. I followed a guide that shows eMMC installation on a industrial device that has same configuration as mine, I applied the same processes and it didn't work (I applied KB2732471 and Intel IO drivers also tried backported drivers). I love the form factor of my laptop and obsessed with Frutiger Aero design and hate this current flat design of 8.x / 10 / 11 , I will try my best to get it working. (Unfortunately, I couldn't find any other 11 inch (that has non soldered ssd) good laptops in my country) Edited March 11, 2024 by fuckuing49ehju
superleiw Posted April 24, 2024 Posted April 24, 2024 Not sure if this is useful as it would need to be backported but Microsoft had released a eMMC Hotfix for W8.1 https://support.microsoft.com/en-us/topic/emmc-device-is-not-detected-as-a-storage-device-by-windows-8-1-or-windows-server-2012-r2-ee95ef54-081c-135c-f38e-142cc4dbbf14 The hotfix can be downloaded from here : https://thehotfixshare.net/board/index.php?/files/file/20824-windows81-kb3078919-x64msu/ (64bit) https://thehotfixshare.net/board/index.php?/files/file/20825-windows81-kb3078919-x86msu/ (32bit) Contains dumpsd.sys and sdbus.sys and sdbus.inf fileversion 6.3.9600.17931 from July 2015
Jakob99 Posted April 24, 2024 Author Posted April 24, 2024 10 hours ago, superleiw said: Not sure if this is useful as it would need to be backported but Microsoft had released a eMMC Hotfix for W8.1 https://support.microsoft.com/en-us/topic/emmc-device-is-not-detected-as-a-storage-device-by-windows-8-1-or-windows-server-2012-r2-ee95ef54-081c-135c-f38e-142cc4dbbf14 The hotfix can be downloaded from here : https://thehotfixshare.net/board/index.php?/files/file/20824-windows81-kb3078919-x64msu/ (64bit) https://thehotfixshare.net/board/index.php?/files/file/20825-windows81-kb3078919-x86msu/ (32bit) Contains dumpsd.sys and sdbus.sys and sdbus.inf fileversion 6.3.9600.17931 from July 2015 That's weird... I thought 8.0 (6.2) supported eMMC's out of box?
superleiw Posted April 25, 2024 Posted April 25, 2024 (edited) It might also depend on the version of the eMMC card. Comparison Link HERE The way I understood it is that this hotfix may only be useful for eMMC cards version 4.41 (and higher?). Older cards would not require it. But then again this could be a 8.1 problem only... Edit : I just verified and Windows 8 received updates to dumpsd.sys and sdbus.sys through Security/Cumulative Updates all the way until 2019 !! For some reason Windows 8.1 never received any updates to those files beyond 2015. So I guess this hotfix is indeed only needed for 8.1 then. W8 might have had this problem as well back then, but it probably has long since been fixed through regular Windows Updates ! I do wonder now if it's possible to go the other way around -> using those updated W8 files on W8.1 for better support for the latest eMMC versions. Edit 2 : Those updated dumpsd and sdbus file seem only available in the Server 2012 updates. Edited May 17, 2024 by superleiw
superleiw Posted April 25, 2024 Posted April 25, 2024 (edited) Found some Windows 7 drivers : Have you already tried any of these eMMC drivers by any chance ? https://board.eclipse.cx/download/file.php?id=272 The W7 Braswell drivers from 2015 might be compatible with your laptop. Edited April 25, 2024 by superleiw
Jakob99 Posted April 25, 2024 Author Posted April 25, 2024 5 hours ago, superleiw said: Found some Windows 7 drivers : Have you already tried any of these eMMC drivers by any chance ? https://board.eclipse.cx/download/file.php?id=272 The W7 Braswell drivers from 2015 might be compatible with your laptop. Tried it and it didn't work
User1732 Posted April 29, 2024 Posted April 29, 2024 I've actually gotten this to work, here's what I did: Extracted sd+mmc_generic_driver.7z Changed to starttype = 0 in all inf files Deleted sdbus and sff* from driverstore (you have to do this otherwise it will bsod after second stage) Used DISM /add-driver (Not DISM++, that did not work) to add the drivers into windows 7 Enable Testsigning Windows 7 will then boot, but it will refuse to have any pagefile for some reason. It will bug you about that every time you log in. Also no write caching. This works on Braswell and GeminiLake, doesn't work on BayTrail.
fuckuing49ehju Posted July 18, 2024 Posted July 18, 2024 @User1732 Is it possible for you to create an ISO. I did the same steps but didn't work. 0x7b BSOD again...
lll888 Posted July 18, 2024 Posted July 18, 2024 4 часа назад, 49ehju сказал: @User1732 User1732 What's the problem ? what you can't do
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now