WinClient5270 Posted January 12, 2016 Posted January 12, 2016 Here is the link for the 4000 series drivers: https://downloadcenter.intel.com/download/20758/Graphics-Intel-HD-Graphics-Driver-for-Windows-Vista
burd Posted January 12, 2016 Author Posted January 12, 2016 i cant modify anything in that though... no inf files
burd Posted January 12, 2016 Author Posted January 12, 2016 (edited) Do try the reverse hack, as compared to the one you already attempted:Get the last driver known to work with Vista (say, for the 4000), and add VEN & DEV from the 4400, and point that to install the same things the .INF would install for the 4000. Then cross your fingers and test it. I don't bet it'll work but, then again, you don't have anything to lose, at this point, right?This is actually working kinda,until it fails, i dont know if im doing it right, do i just copy the inf ? Its attempting to install but it cannot find the driver any help?how to and where to copy/paste files Edited January 12, 2016 by burd
dencorso Posted January 13, 2016 Posted January 13, 2016 i cant modify anything in that though... no inf files Of course there are .INF files. The Universal Extractor can unpack that installer. The inf you should chage is IGDLH.INFDelete the line "CatalogFile=igdlh.cat", then change the line "%iIVBGM0% = iIVBM0, PCI\VEN_8086&DEV_0166", so that the DEV number maches your graphics chip. Then save, cross your fingers and go for it! However, as always, here the standard disclaimer applies: I can guarantee nothing whatsoever about this procedure, and about the use one makes of it. So, by deciding to apply it you fully accept that anything you do is of YOUR SOLE RESPONSIBILITY... Hence, if after performing this mod your pc morphs into a purple mushroom and explodes, causing a 10-day worldwide blackout in the process, followed by a tsunami of purple marshmellow, you know you can't blame me for it! You have been warned.
burd Posted January 13, 2016 Author Posted January 13, 2016 (edited) im ready to try anything , thanks though Edited January 13, 2016 by burd
burd Posted January 13, 2016 Author Posted January 13, 2016 i tried intel 3000/4000 all of them successfully install and upon restart i get the exclaimation mark. Are you sure i have to edit "%iIVBGM0% = iIVBM0, PCI\VEN_8086&DEV_0166"?
dencorso Posted January 13, 2016 Posted January 13, 2016 That seems to be the best bet, iIVBGM0 should mean Ivy Bridge Mobile. But how in the world could I be sure? This is just trial and error! You can try the DEVs 162 and 16A... But do change one at a time. The others should be even older models. Now, it's perfectly possible that neither one will work. As I said before, there's no guarantee whatsoever.
burd Posted January 13, 2016 Author Posted January 13, 2016 i know i shouldve posted this before,but here
burd Posted January 13, 2016 Author Posted January 13, 2016 which one is the one i can use,according to you
dencorso Posted January 13, 2016 Posted January 13, 2016 I don't know which files are those you've got. Get the x64 drivers pointed to on post #16. Extract them. The IGDLH64.INF must have this section: [IntelGfx.NTamd64.6.0]%iSNBGM1% = iSNBM0, PCI\VEN_8086&DEV_0106%iSNBGD1% = iSNBD0, PCI\VEN_8086&DEV_0102%iSNBGM2% = iSNBM0, PCI\VEN_8086&DEV_0116%iSNBGD2% = iSNBD0, PCI\VEN_8086&DEV_0112%iSNBGM2P% = iSNBM0, PCI\VEN_8086&DEV_0126%iSNBGD2P% = iSNBD0, PCI\VEN_8086&DEV_0122%iSNBGD3% = iSNBD0, PCI\VEN_8086&DEV_010A%iIVBGD0% = iIVBD0, PCI\VEN_8086&DEV_0162%iIVBGM0% = iIVBM0, PCI\VEN_8086&DEV_0166%iIVBGD0SRV% = iIVBD0, PCI\VEN_8086&DEV_016A%iIVBGD0GT1% = iIVBD0, PCI\VEN_8086&DEV_0152%iIVBGM0GT1% = iIVBM0, PCI\VEN_8086&DEV_0156%iIVBGD0SRVGT1% = iIVBD0, PCI\VEN_8086&DEV_015AIf so, then replace either 0162, 0166 or 016A, but only one of those each time, by 0A16, and see what happens.The driver you posted is even older, it appears to have only Sandy Bridge...
kmaheshkumar Posted January 13, 2016 Posted January 13, 2016 try drp.su mini tool it just download and install everything
burd Posted January 13, 2016 Author Posted January 13, 2016 i tried and it doesnt work, maybe i should try older drivers like the intel 2000
burd Posted January 13, 2016 Author Posted January 13, 2016 (edited) is there any way to copy the intel 4600 driver from the new pack and add it in the old and install?Or Can I Edit The Windows 7 one,what if i change "w7" to "w6"? [intelGfx.NTamd64.6.1]; HSW Classic%iHSWGT1D% = iHSWD_w7, PCI\VEN_8086&DEV_0402%iHSWGT1M% = iHSWM_w7, PCI\VEN_8086&DEV_0406%iHSWGT2D% = iHSWD_w7, PCI\VEN_8086&DEV_0412%iHSWGT2M% = iHSWM_w7, PCI\VEN_8086&DEV_0416%iHSWGT15D% = iHSWD_w7, PCI\VEN_8086&DEV_041E; HSW ULT%iHSWGT1UT% = iHSWM_w7, PCI\VEN_8086&DEV_0A06%iHSWGT2UT% = iHSWM_w7, PCI\VEN_8086&DEV_0A16%iHSWGT3UT% = iHSWM_w7, PCI\VEN_8086&DEV_0A26%iHSWGT3UT28W% = iHSWM_w7, PCI\VEN_8086&DEV_0A2E%iHSWGT2UX% = iHSWM_w7, PCI\VEN_8086&DEV_0A1E%iHSWGT1ULX% = iHSWM_w7, PCI\VEN_8086&DEV_0A0E; HSW CRW%iHSWGT3CW% = iHSWM_w7, PCI\VEN_8086&DEV_0D26%iHSWGT3CWDT% = iHSWD_w7, PCI\VEN_8086&DEV_0D22; HSW Server%iHSWSVGT2% = iHSWD_w7, PCI\VEN_8086&DEV_041A; BDW HW%iBDWULTGT1% = iBDWM_w7, PCI\VEN_8086&DEV_1606%iBDWULXGT1% = iBDWM_w7, PCI\VEN_8086&DEV_160E%iBDWULTGT2% = iBDWM_w7, PCI\VEN_8086&DEV_1616%iBDWULTGT3% = iBDWM_w7, PCI\VEN_8086&DEV_1626%iBDWULXGT2% = iBDWM_w7, PCI\VEN_8086&DEV_161E%iBDWULTGT328W% = iBDWM_w7, PCI\VEN_8086&DEV_162B Edited January 13, 2016 by burd
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now